Supertex inc. VP3203 P-Channel Enhancement-Mode Vertical DMOS FET Features General Description This low threshold, enhancement-mode (normally-off) transistor utilizes a vertical DMOS structure and Supertex's well-proven, silicon-gate manufacturing process. This combination produces a device with the power handling capabilities of bipolar transistors and the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, this device is free from thermal runaway and thermally-induced secondary breakdown. Free from secondary breakdown Low power drive requirement Ease of paralleling Low CISS and fast switching speeds High input impedance and high gain Excellent thermal stability Integral source-to-drain diode Applications Motor controls Converters Amplifiers Switches Power supply circuits Drivers (relays, hammers, solenoids, lamps, memories, displays, bipolar transistors, etc.) Ordering Information Part Number VP3203N3-G Product Summary Package Option Packing 3-Lead TO-92 1000/Bag 3-Lead TO-92 2000/Reel VP3203N3-G P002 VP3203N3-G P003 VP3203N3-G P005 Supertex's vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where very low threshold voltage, high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. BVDSS/BVDGS -30V (min) 0.6 -4.0A DRAIN VP3203N3-G P014 TO-243AA (SOT-89) 2000/Reel -G denotes a lead (Pb)-free / RoHS compliant package. Contact factory for Wafer / Die availablity. Devices in Wafer / Die form are lead (Pb)-free / RoHS compliant. Value Drain-to-source voltage BVDSS Drain-to-gate voltage BVDGS Gate-to-source voltage 20V -55OC to +150OC Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Continuous operation of the device at the absolute rating level may affect device reliability. All voltages are referenced to device ground. Typical Thermal Resistance Package ja TO-92 132OC/W TO-243AA (SOT-89) 133OC/W SOURCE DRAIN GATE GATE Parameter Operating and storage temperature DRAIN SOURCE Absolute Maximum Ratings Doc.# DSFP-VP3203 B082613 ID(ON) (max) Pin Configuration VP3203N3-G P013 VP3203N3-G RDS(ON) TO-92 TO-243AA (SOT-89) Product Marking S iV P 3 2 0 3 YYWW YY = Year Sealed WW = Week Sealed = "Green" Packaging Package may or may not include the following marks: Si or TO-92 VP2LW W = Code for week sealed = "Green" Packaging Package may or may not include the following marks: Si or TO-243AA (SOT-89) Supertex inc. www.supertex.com VP3203 Thermal Characteristics (continuous) ID ID Power Dissipation (pulsed) @TA = 25OC TO-92 -650mA -4.0A TO-243AA (SOT-89) -1100mA -4.0A Package IDR IDRM 0.74W -650mA -4.0A 1.6 -1100mA -4.0A ID (continuous) is limited by max rated Tj . Mounted on FR5 board, 25mm x 25mm x 1.57mm. Electrical Characteristics (T A = 25OC unless otherwise specified) Sym Parameter Min Typ Max Units BVDSS Drain-to-source breakdown voltage -30 - - V VGS = 0V, ID = -10mA VGS(th) Gate threshold voltage -1.0 - -3.5 V VGS = VDS, ID= -10mA Change in VGS(th) with temperature - - -5.5 IGSS Gate body leakage - -1.0 -100 nA VGS = 20V, VDS = 0V - - -10 A IDSS Zero gate voltage drain current VGS = 0V, VDS = Max Rating - - -1.0 mA VDS = 0.8 Max Rating, VGS = 0V, TA = 125C ID(ON) On-state drain current - -14 - A TO-92 - - 1.0 SOT-89 - - 1.0 TO-92 - - 0.6 SOT-89 - - 0.6 - - 1.0 1000 2000 - VGS(th) RDS(ON) RDS(ON) Static drain-to-source on-state resistance Change in RDS(ON) with temperature GFS Forward transductance CISS Input capacitance - 200 300 COSS Common source output capacitance - 100 120 CRSS Reverse transfer capacitance - 45 60 td(ON) Turn-on delay time - - 10 Rise time - - 15 Turn-off delay time - - 25 Fall time - - 25 Diode forward voltage drop - - Reverse recovery time - 300 tr td(OFF) tf VSD trr Conditions mV/OC VGS = VDS, ID= -10mA VGS = -10V, VDS = -5.0V VGS = -4.5V, ID = -1.5A VGS = -4.5V, ID = -750mA VGS = -10V, ID = -3.0A VGS = -10V, ID = -1.5A %/OC VGS = -10V, ID = -1.5A mmho VDS = -25V, ID = -2.0A pF VGS = 0V, VDS = -25V, f = 1.0MHz ns VDD = -25V, ID = -2.0A, RGEN = 10 -1.6 V VGS = 0V, ISD = -1.5A - ns VGS = 0V, ISD = -1.0A Notes: 1. All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300s pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. Switching Waveforms and Test Circuit 0V INPUT -10V Pulse Generator 10% td(ON) 0V OUTPUT VDD Doc.# DSFP-VP3203 B082613 tr td(OFF) 90% 10% RGEN 90% t(OFF) t(ON) D.U.T. tf INPUT OUTPUT RL 90% 10% 2 VDD Supertex inc. www.supertex.com VP3203 Typical Performance Curves BVDSS Variation with Temperature 2.0 On-Resistance vs. Drain Current 1.1 RDS(ON) () BVDSS (normalized) 1.6 1.0 VGS = -5V 1.2 VGS = -10V 0.8 0.4 0.9 -50 100 0 0 150 -4.0 -8.0 -12 -16 -20 Tj (OC) ID (amperes) Transfer Characteristics V(th) and RDS Variation with Temperature 1.4 TA = -55OC 25OC -6.0 125OC -4.0 1.4 RDS(ON) @ -10V, -3A 1.2 1.2 1.0 1.0 V(th) @ -10mA 0.8 0.8 RDS(ON) (normalized) VDS = -25V -8.0 ID (amperes) 50 VGS(th) (normalized) -10 0 -2.0 0.6 0.6 0 0 -2.0 -4.0 -6.0 -8.0 VGS (volts) -10 -50 0 50 100 150 Tj (OC) Gate Drive Dynamic Characteristics Capacitance vs. Drain-to-Source Voltage 300 -10 f = 1MHz -8.0 VDS = -10V CISS VGS (volts) C (picofarads) 225 150 VDS = -20V -6.0 -4.0 335pF COSS 75 -2.0 200pF CRSS 0 -0 Doc.# DSFP-VP3203 B082613 -10 -20 VDS (volts) 0 -30 3 0 1.0 2.0 3.0 4.0 QG (nanocoulombs) 5.0 Supertex inc. www.supertex.com VP3203 Typical Performance Curves (cont.) Output Characteristics -20 VGS = -10V -8V -12 -8.0 VGS = -10V -16 ID (amperes) ID (amperes) -16 Saturation Characteristics -20 -6V -8V -12 -8.0 -6V -4.0 -4.0 -4V -4V 0 -3V -3V 0 -5.0 -10 -15 -20 -25 0 -30 -6.0 -8.0 -10 Transconductance vs. Drain Current Power Dissipation vs. Ambient Temperature 20 VDS = -25V 3.0 TA = 125OC TA = 25 C O 2.0 TA = -55OC 8.0 4.0 0 -1.0 -2.0 -3.0 ID (amperes) -4.0 0 -5.0 Thermal Resistance (normalized) TO-92 (pulsed) TO-243AA(DC) TO-92 (DC) -0.1 TA = 25OC -10 VDS (volts) 50 75 100 125 150 Thermal Response Characteristics TO-243AA (pulsed) -1.0 25 1.0 -10 -0.01 -0.1 0 TA (OC) Maximum Rated Safe Operating Area -1.0 12 TO-92 1.0 0 TO-243AA 16 PD (watts) GFS (siemens) -4.0 VDS (volts) 4.0 ID (amperes) -2.0 VDS (volts) 5.0 Doc.# DSFP-VP3203 B082613 0 0.8 0.4 0.2 0 -100 TO-243AA PD = 1.6W TA = 25OC 0.6 TO-92 PD = 1W TC = 25OC 0.001 0.01 0.1 1.0 10 tp (seconds) 4 Supertex inc. www.supertex.com VP3203 3-Lead TO-92 Package Outline (N3) D A Seating Plane 1 2 3 L c b e1 e Side View Front View E1 E 1 3 2 Bottom View Symbol Dimensions (inches) A b c D E E1 e e1 L MIN .170 .014 .014 .175 .125 .080 .095 .045 .500 NOM - - - - - - - - - MAX .210 .022 .022 .205 .165 .105 .105 .055 .610* JEDEC Registration TO-92. * This dimension is not specified in the JEDEC drawing. This dimension differs from the JEDEC drawing. Drawings not to scale. Supertex Doc.#: DSPD-3TO92N3, Version E041009. Doc.# DSFP-VP3203 B082613 5 Supertex inc. www.supertex.com VP3203 3-Lead TO-243AA (SOT-89) Package Outline (N8) D D1 C E H L 1 2 E1 3 b b1 e A e1 Top View Symbol Dimensions (mm) Side View A b b1 C D D1 E E1 e MIN 1.40 0.44 0.36 0.35 4.40 1.62 2.29 2.00 NOM - - - - - - - - MAX 1.60 0.56 0.48 0.44 4.60 1.83 2.60 2.29 e1 1.50 BSC 3.00 BSC H L 3.94 0.73 - - 4.25 1.20 JEDEC Registration TO-243, Variation AA, Issue C, July 1986. This dimension differs from the JEDEC drawing Drawings not to scale. Supertex Doc. #: DSPD-3TO243AAN8, Version F111010. (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to http://www.supertex.com/packaging.html.) Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives an adequate "product liability indemnification insurance agreement." Supertex inc. does not assume responsibility for use of devices described, and limits its liability to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com) Supertex inc. (c)2013 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited. Doc.# DSFP-VP3203 B082613 6 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com