VP3203N8G - SUPERTEX - Datasheet.Live

Supertex inc.

www.supertex.com

Doc.# DSFP-VP3203

B082613

VP3203

VP2LW W = Code for week sealed

= “Green” Packaging

YY = Year Sealed

WW = Week Sealed

= “Green” Packaging

SiVP

3203

YYWW

Features

►Free from secondary breakdown

►Low power drive requirement

►Ease of paralleling

►Low CISS and fast switching speeds

►High input impedance and high gain

►Excellent thermal stability

►Integral source-to-drain diode

Applications

►Motor controls

►Converters

►Ampliers

►Switches

►Power supply circuits

►Drivers (relays, hammers, solenoids, lamps,

memories, displays, bipolar transistors, etc.)

TO-243AA (SOT-89)

Package may or may not include the following marks: Si or

General Description

This low threshold, enhancement-mode (normally-off)

transistor utilizes a vertical DMOS structure and Supertex’s

well-proven, silicon-gate manufacturing process. This

combination produces a device with the power handling

capabilities of bipolar transistors and the high input impedance

and positive temperature coefcient inherent in MOS devices.

Characteristic of all MOS structures, this device is free

from thermal runaway and thermally-induced secondary

breakdown.

Supertex’s vertical DMOS FETs are ideally suited to a wide

range of switching and amplifying applications where very

low threshold voltage, high breakdown voltage, high input

impedance, low input capacitance, and fast switching speeds

are desired.

P-Channel Enhancement-Mode

Vertical DMOS FET

Absolute Maximum Ratings

Parameter Value

Drain-to-source voltage BVDSS

Drain-to-gate voltage BVDGS

Gate-to-source voltage ±20V

Operating and storage temperature -55OC to +150OC

Absolute Maximum Ratings are those values beyond which damage to the device

may occur. Functional operation under these conditions is not implied. Continuous

operation of the device at the absolute rating level may affect device reliability. All

voltages are referenced to device ground.

Pin Conguration

TO-92

GATE

SOURCE

DRAIN

TO-92

Product Marking

Package may or may not include the following marks: Si or

Ordering Information

Part Number Package Option Packing

VP3203N3-G 3-Lead TO-92 1000/Bag

VP3203N3-G P002

3-Lead TO-92 2000/Reel

VP3203N3-G P003

VP3203N3-G P005

VP3203N3-G P013

VP3203N3-G P014

VP3203N3-G TO-243AA (SOT-89) 2000/Reel

Product Summary

BVDSS/BVDGS

RDS(ON)

(max)

ID(ON)

(min)

-30V 0.6Ω-4.0A

-G denotes a lead (Pb)-free / RoHS compliant package.

Contact factory for Wafer / Die availablity.

Devices in Wafer / Die form are lead (Pb)-free / RoHS compliant.

Typical Thermal Resistance

Package θja

TO-92 132OC/W

TO-243AA (SOT-89) 133OC/W

TO-243AA (SOT-89)

GATE

SOURCE

DRAIN

2

Supertex inc.

www.supertex.com

Doc.# DSFP-VP3203

B082613

VP3203

Electrical Characteristics (TA = 25OC unless otherwise specied)

Sym Parameter Min Typ Max Units Conditions

BVDSS Drain-to-source breakdown voltage -30 - - V VGS = 0V, ID = -10mA

VGS(th) Gate threshold voltage -1.0 - -3.5 V VGS = VDS, ID= -10mA

ΔVGS(th) Change in VGS(th) with temperature - - -5.5 mV/OC VGS = VDS, ID= -10mA

IGSS Gate body leakage - -1.0 -100 nA VGS = ± 20V, VDS = 0V

IDSS Zero gate voltage drain current

- - -10 µA VGS = 0V, VDS = Max Rating

- - -1.0 mA VDS = 0.8 Max Rating,

VGS = 0V, TA = 125°C

ID(ON) On-state drain current - -14 - A VGS = -10V, VDS = -5.0V

RDS(ON)

Static drain-to-source on-state

resistance

TO-92 - - 1.0

Ω

VGS = -4.5V, ID = -1.5A

SOT-89 - - 1.0 VGS = -4.5V, ID = -750mA

TO-92 - - 0.6 VGS = -10V, ID = -3.0A

SOT-89 - - 0.6 VGS = -10V, ID = -1.5A

ΔRDS(ON) Change in RDS(ON) with temperature - - 1.0 %/OC VGS = -10V, ID = -1.5A

GFS Forward transductance 1000 2000 - mmho VDS = -25V, ID = -2.0A

CISS Input capacitance - 200 300

pF

VGS = 0V,

VDS = -25V,

f = 1.0MHz

COSS Common source output capacitance - 100 120

CRSS Reverse transfer capacitance - 45 60

td(ON) Turn-on delay time - - 10

ns

VDD = -25V,

ID = -2.0A,

RGEN = 10Ω

trRise time - - 15

td(OFF) Turn-off delay time - - 25

tfFall time - - 25

VSD Diode forward voltage drop - - -1.6 V VGS = 0V, ISD = -1.5A

trr Reverse recovery time - 300 - ns VGS = 0V, ISD = -1.0A

Notes:

1. All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.)

2. All A.C. parameters sample tested.

Switching Waveforms and Test Circuit

90%

10%

90% 90%

10%

Pulse

Generator

VDD

R

L

OUTPUT

D.U.T.

t

(ON)

t

d(ON)

t

(OFF)

t

d(OFF)

t

f

t

r

INPUT

R

GEN

INPUT

OUTPUT

0V

VDD

0V

-10V

Thermal Characteristics

Package ID

(continuous)†

ID

(pulsed)

Power Dissipation

@TA = 25OCIDR

†IDRM

TO-92 -650mA -4.0A 0.74W -650mA -4.0A

TO-243AA (SOT-89) -1100mA -4.0A 1.6‡-1100mA -4.0A

† ID (continuous) is limited by max rated Tj .

‡ Mounted on FR5 board, 25mm x 25mm x 1.57mm.

3

Supertex inc.

www.supertex.com

Doc.# DSFP-VP3203

B082613

VP3203

Typical Performance Curves

Gate Drive Dynamic Characteristics

On-Resistance vs. Drain Current

Transfer Characteristics

Capacitance vs. Drain-to-Source Voltage

300

225

150

75

0

C (picofarads)

-0 -10 -20 -30

0 -2.0 -4.0 -6.0 -8.0 -10

-10

-8.0

-6.0

-4.0

-2.0

0

-50 0 50 100 150

1.1

1.0

0.9

2.0

1.6

1.2

0.8

0.4

0

1.4

1.2

1.0

0.8

0.6

0 1.0 2.0 3.0 4.0 5.0

V

GS

= -10V

125

O

C

0 -4.0 -8.0 -12 -16 -20

f = 1MHz

V

(th)

@ -10mA

R

DS(ON)

@ -10V, -3A

200pF

RDS(ON) (Ω)

BVDSS (normalized)

Tj (OC) ID (amperes)

BV

DSS

Variation with Temperature

V

GS

= -5V

VGS(th) (normalized)

V

(th)

and R

DS

Variation with Temperature

V

GS (volts)

ID (amperes)

V

DS

= -25V

T

A = -55OC

QG (nanocoulombs)

V

GS

(volts)

VDS (volts)

V

DS

= -20V

V

DS

= -10V

C

ISS

C

OSS

C

RSS

25OC

Tj (OC)

-50 0 50 100 150

RDS(ON) (normalized)

1.4

1.2

1.0

0.8

0.6

335pF

-10

-8.0

-6.0

-4.0

-2.0

0

4

Supertex inc.

www.supertex.com

Doc.# DSFP-VP3203

B082613

VP3203

Typical Performance Curves (cont.)

Output Characteristics

-20

-16

-12

-8.0

-4.0

0

Saturation Characteristics

Maximum Rated Safe Operating Area

-0.1 -1.0 -10 -100

-10

-1.0

-0.1

-0.01

Thermal Response Characteristics

Thermal Resistance (normalized)

1.0

0.8

0.6

0.4

0.2

0

0.001 0.01 0.1 1.0 10

Transconductance vs. Drain Current Power Dissipation vs. Ambient Temperature

0 25 50 75 100 125 150

TO-243AA

TO-92

TO-243AA(DC)

TO-92 (DC)

0 -5.0 -10 -15 -20 -25 -30

TO-243AA (pulsed)

TO-92 (pulsed)

T

A

= 125

O

C

5.0

4.0

3.0

2.0

1.0

0

0 -1.0 -2.0 -3.0 -4.0 -5.0

-6V

-4V

-3V

-8V

TO-243AA

P

D

= 1.6W

T

A

= 25

O

C

VDS (volts)

I

D

(amperes)

V

GS

= -10V

G

FS

(siemens)

ID (amperes) TA (OC)

P

D

(watts)

V

DS

= -25V

VDS (volts)

I

D

(amperes)

tp (seconds)

TO-92

P

D

= 1W

T

C

= 25

O

C

VDS (volts)

I

D

(amperes)

-6V

-4V

-3V

-8V

V

GS

= -10V

0 -2.0 -4.0 -6.0 -8.0 -10

T

A

= 25

O

C

T

A

= -55

O

C

T

A

= 25

O

C

-20

-16

-12

-8.0

-4.0

0

20

16

12

8.0

4.0

0

5

Supertex inc.

www.supertex.com

Doc.# DSFP-VP3203

B082613

VP3203

3-Lead TO-92 Package Outline (N3)

Symbol A b c D E E1 e e1 L

Dimensions

(inches)

MIN .170 .014†.014†.175 .125 .080 .095 .045 .500

NOM - - - - - - - - -

MAX .210 .022†.022†.205 .165 .105 .105 .055 .610*

JEDEC Registration TO-92.

* This dimension is not specied in the JEDEC drawing.

† This dimension differs from the JEDEC drawing.

Drawings not to scale.

Supertex Doc.#: DSPD-3TO92N3, Version E041009.

Seating

Plane

1

2

3

Front View Side View

Bottom View

E1 E

D

e1

L

e

c

1 2 3

b

A

Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives

an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability

to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and

specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com)

1235 Bordeaux Drive, Sunnyvale, CA 94089

Tel: 408-222-8888

www.supertex.com

6

VP3203

(The package drawing(s) in this data sheet may not reect the most current specications. For the latest package outline

information go to http://www.supertex.com/packaging.html.)

Doc.# DSFP-VP3203

B082613

3-Lead TO-243AA (SOT-89) Package Outline (N8)

Symbol A b b1 C D D1 E E1 e e1 H L

Dimensions

(mm)

MIN 1.40 0.44 0.36 0.35 4.40 1.62 2.29 2.00†

1.50

BSC

3.00

BSC

3.94 0.73†

NOM-------- --

MAX 1.60 0.56 0.48 0.44 4.60 1.83 2.60 2.29 4.25 1.20

JEDEC Registration TO-243, Variation AA, Issue C, July 1986.

† This dimension differs from the JEDEC drawing

Drawings not to scale.

Supertex Doc. #: DSPD-3TO243AAN8, Version F111010.

b b1

D

D1

E H E1

C

A

1 2 3

e

e1

Top View Side View

L