FT04...K LOGIC LEVEL TRIAC TO-225AA / TO-126 Gate Trigger Current < 10 mA On-State Current 4 Amp Off-State Voltage 200 V / 800 V MT1 MT2 G This series of TRIACs uses a high performance PNPN technology. MT2 G These parts are intended for general purpose AC switching applications with highly inductive loads. MT1 Absolute Maximum Ratings, according to IEC publication No. 134 SYMBOL PARAMETER CONDITIONS Value Unit IT(RMS) ITSM ITSM RMS On-state Current (full sine wave) All Conduction Angle, TC = 95 C 4 A Non-repetitive On-State Current Full Cycle, 60 Hz (t = 16.7 ms) 27 A Non-repetitive On-State Current Full Cycle, 50 Hz (t = 20 ms) 25 A I2t Fusing Current tp = 10 ms, Half Cycle 3.1 A2s IGM Peak Gate Current 20 s max. 2 A PG(AV) Average Gate Power Dissipation Tj =125 C 0.5 W dI/dt Critical rate of rise of on-state current IG = 2x IGT, tr 100ns 20 A/s Tj =125 C f= 120 Hz, Tj =125 C Tj Operating Temperature (-40 + 125) C Tstg Storage Temperature (-40 + 150) C Tsld Soldering Temperature 260 C SYMBOL PARAMETER VDRM Repetitive Peak Off State VRRM Voltage 10s max VOLTAGE Unit B D M S N 200 400 600 700 800 V Jul - 11 FT04...K LOGIC LEVEL TRIAC Electrical Characteristics SYMBOL IGT (1) PARAMETER CONDITIONS VD = 12 VDC, RL = 33 W, Tj = 25 C Gate Trigger Current Quadrant SENSITIVITY 07 08 09 Unit Q1/Q3 MAX 5 10 10 mA MAX 7 10 mA Q4 VGT VGD IH (2) IL dV/dt Gate Trigger Voltage VD = 12 VDC, RL = 33 W, Tj = 25 C Gate Non Trigger Voltage Q1/Q4 MIN 1.3 V Q1/Q4 MAX 1.3 V VD = VDRM, RL = 3.3 KW, Tj = 125 C Q1/Q3 MIN 0.2 V 0.2 V IT = 100 mA, Gate open, Tj = 25 C IG = 1.2 IGT, Tj = 25 C Holding Current Latching Current (2) Q1/Q3 MAX MAX Q1,Q3 MAX 15 Q1,Q3,Q4 MAX 20 Q2 MAX 30 MIN Critical Rate of Voltage Rise VD = 0.67 x VDRM, Gate open 20 mA mA 20 mA 30 25 mA 20 40 40 V/s 15 25 Tj = 125 C (dl/dt)c (2) Critical Rate of Current Rise (dv/dt)c = 0.1 V/s Tj = 125 C MIN 1.8 2.7 2.5 A/ms (dv/dt)c = 10 V/s Tj = 125 C MIN 0.9 2.0 1.5 A/ms without snubber Tj = 125 C MIN - - - VTM (2) On-state Voltage IT = 5.5 Amp, tp = 380 s, Tj = 25 C MAX 1.7 V Vto (2) Threshold Voltage Tj = 125 C MAX 0.95 V rd (2) IDRM/IRRM Dynamic resistance Off-State Leakage Current Tj = 125 C VD = VDRM, 180 0.5 mW Tj = 125 C MAX MAX VR = VRRM, Tj = 25 C MAX 5 A for AC 360 conduction angle 3.0 C/W S = 1cm2 75 C/W Rth(j-c) Thermal Resistance Junction-Case Rth(j-a) Thermal Resistance Junction-Ambient mA (1) Minimum IGT is guaranted at 5% of IGT max. (2) For either polarity of electrode MT2 voltage with reference to electrode MT1. PART NUMBER INFORMATION F T 04 07 B K 00 BU FAGOR TRIAC CURRENT PACKAGING FORMING CASE VOLTAGE SENSITIVITY Jul - 11 FT04...K LOGIC LEVEL TRIAC Fig. 1: Maximum power dissipation versus RMS on-state curren (full cycle). 5 P (W) Fig. 2: RMS on-state current versus case temperature (full cycle). 5 4 4 3 3 2 2 360 1 1 a 0 0 0.5 1 1.5 2 2.5 IT(RMS)(A) 3 3.5 Fig. 3: Relative variation of thermal impedance versus pulse duration. 1E+0 I T(RMS) (A) 0 0 25 50 75 100 125 Fig. 4: On-state characteristics (maximum values) K=[Zth / Rth] 20.0 Zth(j-c) ITM(A) 10.0 Tj max Vto = 0.9 V Rd = 180 mW Tj max 1E-1 Zth(j-a) 1.0 Tj initial 25C 1E-2 1E-3 tp (s) 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 Fig. 5: Surge peak on-state current versus number of cycles 35 I TSM (A) Tj initial = 25 C F= 50Hz 30 0.1 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 VTM(V) Fig. 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width 2 tp<10ms, and corresponding value of I t. 100 ITSM(A). I2t (A2s) Tj initial = 25 C ITSM 25 20 10 15 I2 t 10 5 0 1 10 100 Number of cycles 1000 1 tp(ms) 1 10 Jul - 11 FT04...K LOGIC LEVEL TRIAC Fig. 7: Relative variation of gate trigger current, holding current and latching versus junction temperature (typical values) 2.5 2.0 IGT,IH,IL[Tj]/IGT,IH,IL.[Tj=25C] 6 (dI/dt)c [Tj]/(dI/dc)c [Tj specified] 2.0 (dV/dt)c (typical values). 1.6 IGT 4 IH&IL Fig. 9: Relative variation of critical rate of decrease of main current versus 1.8 5 1.5 1.0 Fig. 8: Relative variation of critical rate of decrease of main current versus junction temperature 1.4 3 1.2 1.0 2 0.8 0.5 1 Tj(C) 0 -40 -20 0 20 40 60 80 100 120140 PACKAGE MECHANICAL DATA 0 0.6 0 25 50 75 100 Tj(C) 125 0.4 0.1 (dV/dt)c (V/S) 1.0 10.0 100.0 TO-225AA / TO-126 REF. A A1 b b1 c D E e e1 L L1 P o Mounting Torque Min. 2.500 1.100 0.660 1.170 0.450 7.400 10.600 4.480 15.300 2.100 3.900 3.000 DIMENSIONS Milimeters Nominal 2.290 Max. 2.900 1.500 0.860 1.370 0.600 7.800 11.000 4.680 15.700 2.300 4.100 3.200 0.67 N.m (*) Limiting values and life support applications, see Web page. Jul - 11