Terminal Blocks - Single Row Series A1000 & Series CB1000 Single Row Terminal Blocks SPECIFICATIONS Rating: 20A, 250V* Center Spacing: 0.325" (8.26mm) Wire Range: #14-22 AWG CU Screw Size: #6-32 zinc-plated philslot wire-ready screws with a #2 driving recess. Torque Rating: 9 lb-in. Base: Standoffs are standard on CB1000 Series for easy flux washing. Distance Between Barriers: 0.26" (6.6mm) Recommended PCB Hole Diameter: 0.070" (1.78mm) Operating Temperature: 105C (221F) max., -40C (-40F) min. Molded Material: Black, UL Rated 94V0 Thermoplastic Breakdown Voltage: 1600V Agency Information: UL/CSA; IEC Compliance; CE Certified; UL File: E62622, CSA File: 15364 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 MOUNTING ENDS ONLY A C Mount Ctrs. Length 0.98 1.30 1.63 1.95 2.28 2.60 2.93 3.25 3.58 3.90 4.23 4.55 4.88 5.20 5.53 5.85 6.18 6.50 6.83 7.15 7.48 7.80 8.13 8.45 8.78 9.10 9.43 9.75 10.08 10.40 10.73 11.05 11.38 - - A102206 Dimensions - in (mm) A1000 Series 0.325 (8.26) 0.15 (3.8) O *General industrial applications Poles CB10210707 1.37 1.69 2.02 2.34 2.67 2.99 3.32 3.64 3.97 4.29 4.62 4.94 5.27 5.59 5.92 6.24 6.57 6.89 7.22 7.54 7.87 8.19 8.52 8.84 9.17 9.49 9.82 10.14 10.47 10.79 11.12 11.44 11.77 - - BARRIER & MOUNTING ENDS B Pole Ctrs. 0.33 0.65 0.98 1.30 1.63 1.95 2.28 2.60 2.93 3.25 3.58 3.90 4.23 4.55 4.88 5.20 5.53 5.85 6.18 6.50 6.83 7.15 7.48 7.80 8.13 8.45 8.78 9.10 9.43 9.75 10.08 10.40 10.73 11.05 11.38 BARRIER ENDS ONLY C Length 0.72 1.04 1.37 1.69 2.02 2.34 2.67 2.99 3.32 3.64 3.97 4.29 4.62 4.94 5.27 5.59 5.92 6.24 6.57 6.89 7.22 7.54 7.87 8.19 8.52 8.84 9.17 9.49 9.82 10.14 10.47 10.79 11.12 11.44 11.77 0.50 (12.7) C Mount End 0.50 (12.7) 0.25 (6.4) A Mount Centers B Pole Centers Mount End Barrier End CB1000 Series 0.325 (8.26) 0.15 (3.8) O 0.25 (6.4) 0.60 (15.2) C Mount End Barrier End 0.52 (13.2) 0.27 (6.9) 0.025 (0.64) A Mount Centers B Pole Centers Mount End * Dimensions in inches. To convert to millimeters, multiply by 25.4. Barrier End Barrier End Terminal Blocks - Single Row MAGNUM (R) Part Numbering System Series Terminal Style A 1 C B 1 A1 - standard barrier CB1 - closed back 02 03 04 07 - printed circuit - non feed-thru - wire wrap tail - extended pin Base/End Poles 1 - mount end 2 - barrier end Screw Options 02 to 36 02 to 34 on mount end base Covers - (pg 23) Options Terminal Styles 0.35 (8.9) 0.14 (3.6) 03 Non Feed-Thru Screw Options Standard Zinc-Plated Steel 0.54 (13.7) 0.032 (0.81) 0.055 (1.40) 0.032 (0.81 02 Printed Circuit AB & DR - angle mts. (A1 only-pg 5) B1 to B9 - 0.187" QC (all positions) EB - exit back terminals on CB1 w/07 screw option only JA, JB & JC - barrier jumpers L1 to L6 marking options (pg 22) LT1 to LT6 marking options (CB1 only-pg 22) MP & MT - mounting plates 0.150 dia (pg 5) R26 & R45 - right angle bends (A1 only-pg 5) Inches (Millimeters) 0.16 (4.1) 0.055 (1.40) Blank - std. screws 03 - stainless steel 04 - nickel brass 07 - steel SEMS & washer (not available with hardware options) 09 - brass/nickel-plated SEMS CA - standard captive screw 0.14 (3.6) 0.055 (1.40) 0.14 (3.6) 04 Wire Wrap Tail 0.032 (0.81) 07 Extended Pin Wire ready screws standard on all terminal styles 04 Brass Nickel-Plated 03 Stainless Steel 09 Nickel-plated Brass Screws 07 Steel SEMS Zinc-Plated CB1 Terminal Exit Options Inches (Millimeters) 0.275 (6.98) 0.12 (3.0) EB Exit Back Exit Rear (std.) Hardware Options Jumpers Inches (Millimeters) (Bulk ordering part numbers are in parentheses.) Quick Connects Blade Width B = 0.187". (For other orientations, contact factory.) 0.33 (8.4) JA (JA1-XX) B1 (1B1-J) * B2 (1B2-J) * B3 (1B3-J) * B4 (1B4-J) * B5 (1B5-J) * B6 (1B6-J) * B7 (1B7-J) B8 (1B8-J) 0.33 (8.4) JB (JB1-XX) 0.33 (8.4) * N/A on CB1 Series. Contact factory for pole configuration.. JC (JC1-XX) B9 (1B9-J) . Terminal Blocks - Single Row Series A1000 & CB1000 Single Row Terminal Blocks Continued Mounting Options Inches (Millimeters) Right Angle Bends (A1 only) Right angle terminals are offered on the A1000 Series. Configurations are defined in these dimensions: X = pin extension beyond the block base; Z = length from block base to centerline of the terminal tip. Standard bends consist of the X and Z dimensions shown in the chart. Specify by adding the selected Bend Option Code to the terminal part number. Z X Bend Option Code R26 (04 terminal only) R45 (07 terminal only) X (minimum) Z 0.14 (3.5) 0.33 (8.4) 0.09 (2.3) 0.09 (2.3) Dimensions in inches. To convert to millimeters, multiply by 25.4. Drilled Right Angle (A1 only) Angle Brackets (A1 only) 5 0.32 0 0.25 0.04 0.450 0.144 HOLE w/0.312 C' BORE 0.320 0.150 Option AB Angle brackets enable block to be fastened at right angles to normal mount position. Bulk part number 1AB-J. Mounting Plates 0.12 ; MOUNTING PLATE MP MT Options MP & MT MP Metal inserts with 0.150" (3.8) dia. hole accept #6 screw. MT Metal inserts with tapped hole accept #6-32 screw. Bulk part numbers 1MP-J & 1MT-J. Option DR Counterbored holes across mount ends of block enable fastening with two screws at right angles to normal mount position.