NTZD3154NT5G - ON Semiconductor

March, 2006 − Rev. 1

1Publication Order Number:

NTZD3154N/D

NTZD3154N

Small Signal MOSFET

20 V, 540 mA, Dual N−Channel

Features

•Low RDS(on) Improving System Efficiency

•Low Threshold Voltage

•Small Footprint 1.6 x 1.6 mm

•ESD Protected Gate

•These are Pb−Free Devices

Applications

•Load/Power Switches

•Power Supply Converter Circuits

•Battery Management

•Cell Phones, Digital Cameras, PDAs, Pagers, etc.

MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.)

Parameter Symbol Value Unit

Drain−to−Source Voltage VDSS 20 V

Gate−to−Source Voltage VGS ±6.0 V

Continuous Drain Current

(Note 1) Steady

State

TA = 25°C

540 mA

TA = 85°C 390

Power Dissipation

(Note 1) Steady State PD250 mW

Continuous Drain Current

(Note 1) t v 5 s

TA = 25°C

570 mA

TA = 85°C410

Power Dissipation

(Note 1) t v 5 s PD280 mW

Pulsed Drain Current tp = 10 msIDM 1.5 A

Operating Junction and Storage Temperature TJ,

TSTG

−55 to

150

°C

Source Current (Body Diode) IS350 mA

Lead Temperature for Soldering Purposes

(1/8″ from case for 10 s)

TL260 °C

THERMAL RESISTANCE RATINGS

Parameter Symbol Max Unit

Junction−to−Ambient – Steady State

(Note 1) RqJA

500 °C/W

Junction−to−Ambient – t v 5 s (Note 1) 447

Stresses exceeding Maximum Ratings may damage the device. Maximum

Ratings are stress ratings only. Functional operation above the Recommended

Operating Conditions is not implied. Extended exposure to stresses above the

Recommended Operating Conditions may affect device reliability.

1. Surface mounted on FR4 board using 1 in sq pad size

(Cu. area = 1.127 in sq [1 oz] including traces).

SOT−563−6

CASE 463A

MARKING

DIAGRAM

http://onsemi.com

V(BR)DSS RDS(on) Typ ID Max (Note 1)

400 mW @ 4.5 V

500 mW @ 2.5 V 540 mA

700 mW @ 1.8 V

TV M G

Top View

PINOUT: SOT−563

N−Channel

MOSFET

See detailed ordering and shipping information in the package

dimensions section on page 4 of this data sheet.

ORDERING INFORMATION

TV = Specific Device Code

M = Date Code

G= Pb−Free Package

(Note: Microdot may be in either location)

NTZD3154N

http://onsemi.com

ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted.)

Parameter Symbol Test Condition Min Typ Max Unit

OFF CHARACTERISTICS

Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA20 − − V

Drain−to−Source Breakdown Voltage Tem-

perature Coefficient

V(BR)DSS/TJ−−14 −mV/°C

Zero Gate Voltage Drain Current

IDSS VGS = 0 V

VDS = 16 V

TJ = 25°C− − 1.0 mA

TJ = 125°C− − 5.0

Gate−to−Source Leakage Current IGSS VDS = 0 V, VGS = "4.5 V− − "5.0 mA

ON CHARACTERISTICS (Note 3)

Gate Threshold Voltage VGS(TH) VGS = VDS, ID = 250 mA0.45 −1.0 V

Negative Threshold Temperature Coefficient VGS(TH)/TJ− − 2.0 −mV/°C

Drain−to−Source On Resistance

RDS(on)

VGS = 4.5 V, ID = 540 mA −0.4 0.55 W

VGS = 2.5 V, ID = 500 mA −0.5 0.7

VGS = 1.8 V, ID = 350 mA −0.7 0.9

Forward Transconductance gFS VDS = 10 V, ID = 540 mA −1.0 −S

CHARGES AND CAPACITANCES

Input Capacitance CISS

VGS = 0 V, f = 1.0 MHz, VDS = 16 V

−80 150 pF

Output Capacitance COSS −13 25

Reverse Transfer Capacitance CRSS −10 20

Total Gate Charge QG(TOT)

VGS = 4.5 V, VDS = 10 V; ID = 540 mA

−1.5 2.5 nC

Threshold Gate Charge QG(TH) −0.1 −

Gate−to−Source Charge QGS −0.2 −

Gate−to−Drain Charge QGD −0.35 −

SWITCHING CHARACTERISTICS, VGS = V (Note 4)

Turn−On Delay Time td(ON)

VGS = 4.5 V, VDD = 10 V, ID = 540 mA,

RG = 10 W

−6.0 −ns

Rise Time tr−4.0 −

Turn−Off Delay Time td(OFF) −16 −

Fall Time tf−8.0 −

DRAIN−SOURCE DIODE CHARACTERISTICS

Forward Diode Voltage

VSD VGS = 0 V,

IS = 350 mA

TJ = 25°C−0.7 1.2 V

TJ = 125°C−0.6 −

Reverse Recovery Time tRR VGS = 0 V, dISD/dt = 100 A/ms, IS = 350 mA −6.5 −ns

2. Surface−mounted on FR4 board using 1 in. sq. pad size (Cu. area = 1.127 in sq [1 oz] including traces).

3. Pulse Test: pulse width v 300 ms, duty cycle v2%.

4. Switching characteristics are independent of operating junction temperatures.

NTZD3154N

http://onsemi.com

TYPICAL PERFORMANCE CURVES (TJ = 25°C unless otherwise noted)

0.2

0.4

0.6

0.8

1.0

1.2

012345678910

VDS, DRAIN−TO−SOURCE VOLTAGE (V)

ID, DRAIN CURRENT (A)

Figure 1. On−Region Characteristics

1.8 V

VGS = 1.6 V

VGS = 1.4 V

VGS = 1.2 V

VGS = 1.0 V 0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

0.5 1.0 1.5 2.0 2.5 3.0

VGS, GATE−TO−SOURCE VOLTAGE (V)

ID, DRAIN CURRENT (A)

Figure 2. Transfer Characteristics

VDS w 10 V

TJ = 25°C

TJ = 100°C

TJ = −55°C

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

123456

VGS, GATE−TO−SOURCE VOLTAGE (V)

RDS(on), DRAIN−TO−SOURCE CURRENT

RESISTANCE (W)

Figure 3. On−Resistance versus

Gate−to−Source Voltage

ID = 0.54 A

TJ = 25°C

5.5 V

VGS = 2.0 V to 2.2 V

0.3

0.4

0.5

0.6

0.7

0.8

0.9

0.2 0.4 0.6 0.8 1 1.2

ID, DRAIN CURRENT (A)

Figure 4. On−Resistance versus Drain Current

and Gate Voltage

RDS(on), DRAIN−TO−SOURCE

RESISTANCE (W)

TJ = 25°C

VGS = 1.8 V

VGS = 2.5 V

VGS = 4.5 V

TJ = 25°C

0.6

0.8

1.2

1.4

1.6

1.8

−50 −25 0 25 50 75 100 125 150

TJ, JUNCTION TEMPERATURE (°C)

RDS(on), DRAIN−TO−SOURCE

RESISTANCE (NORMALIZED)

Figure 5. On−Resistance Variation with

Temperature

ID = 0.54 A

VGS = 4.5 V

100

1000

2 4 6 8 101214161820

VDS, DRAIN−TO−SOURCE VOLTAGE (V)

IDSS, LEAKAGE (nA)

Figure 6. Drain−to−Source Leakage Current

versus Voltage

TJ = 150°C

TJ = 100°C

VGS = 0 V

NTZD3154N

http://onsemi.com

TYPICAL PERFORMANCE CURVES (TJ = 25°C unless otherwise noted)

100

150

200

505101520

Figure 7. Capacitance Variation

C, CAPACITANCE (pF)

VDS = 0 V

TJ = 25°C

VGS = 0 V

CRSS

CISS

0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6

VDS, DRAIN−TO−SOURCE VOLTAGE (V)

VGS, GATE−TO−SOURCE VOLTAGE (V)

QGD

QGS

Figure 8. Gate−to−Source and

Drain−to−Source Voltage versus Total Charge

Qg, TOTAL GATE CHARGE (nC)

ID = 0.54 A

TJ = 25°C

VDS

VGS

100

1 10 100

t, TIME (ns)

Figure 9. Resistive Switching Time Variation

versus Gate Resistance

RG, GATE RESISTANCE (W)

td(OFF

)

td(ON)

VDS = 10 V

ID = 0.2 A

VGS = 4.5 V

0.1

0.2

0.3

0.4

0.5

0.6

0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

IS, SOURCE CURRENT (A)

Figure 10. Diode Forward Voltage versus

Current

VSD, SOURCE−TO−DRAIN VOLTAGE (V)

VGS = 0 V

TJ = 25°C

COSS

GATE−TO−SOURCE OR DRAIN−TO−SOURCE VOLTAGE (V)

VGS VDS

ORDERING INFORMATION

Device Package Shipping

NTZD3154NT1G SOT−563

(Pb−Free)

4000 / Tape & Reel

NTZD3154NT5G SOT−563

(Pb−Free)

8000 / Tape & Reel

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

NTZD3154N

http://onsemi.com

PACKAGE DIMENSIONS

DIM MIN NOM MAX

MILLIMETERS

A0.50 0.55 0.60

b0.17 0.22 0.27

D1.50 1.60 1.70

E1.10 1.20 1.30

e0.5 BSC

L0.10 0.20 0.30

1.50 1.60 1.70

0.020 0.021 0.023

0.007 0.009 0.011

0.059 0.062 0.066

0.043 0.047 0.051

0.02 BSC

0.004 0.008 0.012

0.059 0.062 0.066

MIN NOM MAX

INCHES

SOT−563, 6 LEAD

CASE 463A−01

ISSUE F

0.08 (0.003) X

b6 5 PL

−X−

−Y−

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: MILLIMETERS

3. MAXIMUM LEAD THICKNESS INCLUDES LEAD

FINISH THICKNESS. MINIMUM LEAD THICKNESS

IS THE MINIMUM THICKNESS OF BASE MATERIAL.

12 3

1.35

0.0531

0.5

0.0197

ǒmm

inchesǓ

SCALE 20:1

0.5

0.0197

1.0

0.0394

0.45

0.0177

0.3

0.0118

*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering and

Mounting Techniques Reference Manual, SOLDERRM/D.

SOLDERING FOOTPRINT*

0.08 0.12 0.18 0.003 0.005 0.007

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer

purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Japan: ON Semiconductor, Japan Customer Focus Center

2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051

Phone: 81−3−5773−3850

NTZD3154N/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 61312, Phoenix, Arizona 85082−1312 USA

Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada

Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: http://onsemi.com

Order Literature: http://www.onsemi.com/litorder

For additional information, please contact your

local Sales Representative.