@ Analog input and output @ Delays stable and precise @ 14-pin Wee DIP package (.200 high) @ Available in delays from 1ns to 250ns @ Precise, fixed delay @ Available in impedances of 50, 100, 200, 350 and 500 ohms @ SOL-14 footprint design notes The Surface Mount Wee DIP Series Lumped Constant Passive Delay Lines developed by Engineered Components Com- pany have been designed to provide precise delays for analog delay line applications. These delay lines provide excellent delay accuracy, low DCR, low attenuation and low distortion. These delay lines are offered in 188 models with delays from 1 to 250ns. Delay time is measured at the 50% point on the leading edge. Accuracies are maintained as shown under Operating Characteristics. Temperature coefficient of delay is less than 75 ppm/C over the operating temperature range of 55 to +125C. The Surface Mount Wee DIP Series LC delay lines are in- tended for use in most analog applications; they are also compatible with the low signal levels of TTL and ECL. These 2 engineered components company 3580 Sacramento Drive, P. O. Box 8121, San Luis Obispo, CA 93403-8121 Phone: (805) 544-3800 surface mount Wee DIP LUMPED CONSTANT DELAY LINE delay lines find extensive use in providing the required delay tim- ing functions necessary in radar, computer, communication, testing and instrument applications. Construction of the SMWD Series utilizes miniature induc- tors and monolithic ceramic capacitors to provide the utmost in miniaturization and reliability. The MTBF on these delay lines, when calculated per MIL-HDBK-217, for a 50C ground fixed environment and with 5V DC applied, is in excess of 12 million hours. The SMWD Series delay lines are packaged in a 14-pin DIP housing, molded of flame-proof Diallyl Phthalate per MIL-M-14, Type SDG-F. These delay lines are designed to meet the applicable portions of MIL-D-23859, and they are capable of meeting the environmental requirements of MIL-STD-202 for moisture resistance, vibration, temperature cycling, humidity and life. Leads meet the solderability requirements of MIL-STD-202, Method 208 and provide positive standoff from the printed circuit board to permit flush cleaning of solder-flux residues for improved reliability. Marking consists of manufacturers logo (EC2), federal supply code, part number, terminal identification and date code of manufacture. Ail marking is applied by silk screen process using white epoxy paint in accordance with MIL-STD-130, to meet the permanency of identification required by MIL-STD-202, Method 215.BLOCK DIAGRAM IS SHOWN BELOW 14 8 MECHANICAL DETAILS ARE SHOWN BELOW .400 IL IN OUT 280 @SMwo- | C c U l ato fr? 9110 | MADE IN SLO USA yo & a .067 TYP. b o10 020>I | i {i TYP. | .150 Lg TYP. *Gull Wing Configuration _ 400 ra. | OUT 280 @ SMWD, |e c = obo br? 9110 yf ovo} f .010 wy TYP. ors +| Ie _ .150 TYP. *Jlead Configuration Page 2 of 3 TEST CONDITIONS 1. All measurements are made at 25C. 2. Test procedures in accordance with MIL-D-23859. OPERATING CHARACTERISTICS Total delay tolerance: ...... See tabulations Rise time, maximum: ...... See tabulations Impedance: ........+..- 50, 100, 200, 350, or 500 ohms Impedance tolerance: ...... +10% DC resistance, maximum:. . . . See tabulations Attenuation, maximum:..... .5 db Distortion, maximum: ..... - +5% Overshoot, maximum:. ..... 10% Working voltage, maximum: . . 25V DC Dielectric strength: ....... 100V DC @ 50ua Insulation resistance, minimum: 10,000 megohms@ 100V DC PART NUMBER TABLE *Suffix Part Number with G (for Gull Wing) or J (for Jlead) Examples: SMWD-501G (Gull Wing) or SMWD-5250J (J lead) Part Delay Rise | impedance} DCR Number Time Time| (ohms) (ohms) (ns) (ns) SMWD-501 12 0O2| 1.4 50 0.2 SMWD-502 2+ 0.2] 1.4 0.3 SMWD-503 3+ 03] 1.7 A 0.4 SMWD-504 4+ 04] 2.6 0.4 SMWD-505 5+ 05| 2.6 0.4 SMWD-506 6+ 05| 2.6 0.4 SMWD-507 7+ 0.5| 3.0 0.4 SMWD-508 8+ 06] 3.2 0.5 SMWD-509 9+ 06] 3.6 0.5 SMWD-510 10+ 0.7] 4.4 0.6 SMWD-512 12+ 07] 44 0.6 SMWD-514 14+ 08] 5.2 0.6 SMWD-516 16+ 0.8] 5.8 0.6 SMWD-518 18+ 1.0] 6.5 0.6 SMWD-520 20+ 1.0] 8.5 0.8 SMWD-522 22+ 1.0] 8.5 0.8 SMWD-524 244+ 1.0] 8.5 0.8 SMWD-526 26+ 1.2] 9.2 0.8 SMWD-528 28+ 1.2] 9.5 0.8 SMWD-530 30 + 1.5] 12.0 1.1 SMWD-535 35 + 1.5] 14.5 1.41 SMWD-540 40 + 2.0] 16.0 4.2 SMWD-545 45 + 2.0] 18.0 1.2 SMWD-550 50 + 2.5] 19.0 1.2 SMWD-560 60 + 2.5] 20.0 1.2 SMWD-570 70 + 3.0] 23.0 1.2 SMWD-580 80 + 3.0] 26.0 1.2 SMWD-590 90 + 4.0] 32.0 1.2 SMWD-5100 |100 + 4.0] 35.0 1.3 SMWD-5110 ]|110 + 4.5| 38.0 1.3 SMWD-5120 |120 + 4.5] 42.0 2.3 SMWD-5130 |130 +4 5.0] 46.0 2.3 SMWD-5140 |140 + 5.0] 48.0 2.3 SMWD-5150 |150 + 5.5] 50.0 2.5 SMWD-5160 | 160 + 5.5] 53.0 2.5 SMWD-5170 |170 + 6.0] 56.0 2.7 SMWD-5180 |180 + 6.0] 58.0 2.7 SMWD-5190 [190 + 7.0] 62.0 2.8 SMWD-5200 |200 + 8.0} 68.0 2.8 SMWD-5210 |210 + 8.5 | 68.0 3.0 SMWD-5220 |220 + 9.0] 74.0 3.0 SMWD-5230 | 230 + 9.5] 74.0 Y 3.0 SMWD-5240 | 240 +10.0] 80.0 3.0 SMWD-5250 | 250 +10.0] 80.0 50 3.0PART NUMBER TABLE Part Delay | Rise | Impedance| DCR Part Delay | Rise | impedance| DCR Number Time |Time{ (ohms) | (ohms) Number Time |Time| (ohms) | (ohms) (ns) (ns} (ns) (ns) SMWD-1001 T+ 0.2] 1.4 TOO 0.2 SMWD-3502 + 0.2| 4.5 350 0.2 SMWD-1002 2+ 0.2] 1.8 j 0.3 SMWD-3503 + 0.3] 4.0 A 0.3 SMWD-1003 3+ 03] 1.8 } 0.4 SMWD-3504 + 0.4] 40 0.5 SMWD-1004 4+ 0.4] 2.0 0.5 SMWD-3505 + 0.5] 4.0 0.5 SMWD-1005 5+ 05] 2.8 0.6 SMWD-3506 + 05] 40 0.6 SMWD-1006 6+ 05] 2.8 0.6 SMWD-3507 + 0.5) 4.5 0.8 SMWD-1007 7+ 05| 3.2 0.6 SMWD-3508 + 0.6] 4.5 0.8 SMWD-1008 8+ 0.6] 3.2 0.6 SMWD-3509 + 0.6] 5.0 0.8 SMWD-1009 9+ 06] 3.6 0.7 SMWD-3510 + O.7| 5.5 0.8 SMWD-1010 10+ 0.7] 46 0.8 SMWD-3512 + 0.7| 6.5 0.8 SMWD-1012 12+ 0.7] 48 0.8 SMWD-3514 + 0.8] 6.5 0.9 SMWD-1014 14+ 0.8] 5.0 0.9 SMWD-3516 + 0.8] 7.0 1.0 SMWD-1016 16+ 08] 5.6 0.9 SMWD-3518 + 1.0] 7.5 4.0 SMWD-1018 18+ 1.0] 6.5 1.0 SMWD-3520 + 1.0| 8.0 1.0 SMWD-1020 20+ 1.01 8.5 1.2 SMWD-3522 + 1.0| 8.5 1.0 SMWD-1022 22+ 1.0] 8.5 1.0 SMWD-3524 + 1.0] 9.0 1.2 SMWD-1024 24+ 1.0) 8.5 1.0 SMWD-3526 + 1.2| 10.0 1.4 SMWD-1026 26 + 1.2] 9.0 1.0 SMWD-3528 + 1.2] 12.0 1.4 SMWD-1028 28+ 1.2) 9.5 1.2 SMWD-3530 + 1.5| 12.0 1.4 SMWD-1030 30 + 1.5] 12.0 1.0 SMWD-3535 35 + 1.5] 14.0 1.4 SMWD-1035 35 + 1.5] 14.5 1.0 SMWD-3540 40 + 2.0] 15.0 2.4 SMWD-1040 40 + 2.0] 14.5 1.2 SMWD-3545 45 + 2.0] 16.0 2.6 SMWD-1045 45 + 2.0] 17.0 1.4 SMWD-3550 50 + 2.5] 18.0 3.0 SMWD-1050 50 + 2.5| 19.0 1.2 SMWD-3560 60 + 2.5] 22.0 3.5 SMWD-1060 60 + 2.5| 22.0 1.4 || SMWD-3570 70 + 3.0] 25.0 5.0 SMWD-1070 70 + 3.0| 24.0 2.3 SMWD-3580 80 + 3.0] 30.0 y 6.5 SMWD-1080 80 + 3.0] 27.0 2.4 SMWD-3590 90 + 4.0] 35.0 7.0 SMWD-1090 90 + 4.0] 32.0 2.6 SMWD-35100 100 + 4.0] 38.0 350 7.0 SMWD-10100 | 100 + 4.0] 35.0 2.8 SMWD-10110 | 110 + 4.5! 38.0 28 il SMWD-10120 |120 + 4.5] 42.0 3.2 SMWD-10130 | 130 + 5.0] 46.0 3,2 SMWD-10140 | 140 + 5.0] 48.0 3.5 SMWD-10150 | 150 + 5.5] 50.0 3.5 SMWD-10160 | 160 + 5.5] 53.0 3.5 SMWD-10170 |170 + 6.0] 56.0 4.8 SMWD-10180 | 180 + 6.0] 60.0 5.2 SMWD-10190 |190 + 7.0] 62.0 5.5 SMWD-10200 | 200 + 8.0] 68.0 5.5 SMWD-10210 |210 + 8.5] 70.0 5.5 SMWD-10220 | 220 + 9.0] 72.0 6.0 SMWD-10230 | 230+ 9.5] 74.0 v 6.0 SMWD-10240 | 240 + 10.0] 80.0 6.0 SMWD-10250 | 250 +10.0] 85.0 100 6.0 SMWD-2001 1+ 0.2) 2.2 200 0.2 SMWD-5002 2+ 0.2] 4.8 500 0.2 SMWD-2002 2+ 0.21 2.4 0.3 SMWD-5003 3+ 0.3] 6.5 0.3 SMWD-2003 3+ 0.3] 2.4 0.4 SMWD-5004 4+ 0.4) 65 A 0.3 SMWD-2004 4+ 0.4] 2.4 0.5 SMWD-5005 5+ O05) 6.5 0.3 SMWD-2005 5 + 0.5] 3.6 0.5 SMWD-5006 6+ 0.5] 6.5 0.6 SMWD-2006 6+ 0.5| 3.6 0.5 SMWD-5007 7+ O05) 6.5 0.8 SMWD-2007 7+ 0.5] 3.6 0.5 SMWD-5008 8+ 0.6] 7.0 0.8 SMWD-2008 8+ 0.6] 3.8 0.5 SMWD-5009 9+ 0.6] 7.0 0.8 SMWD-2009 9+ 0.6] 4.0 0.6 SMWD-5010 10 + 0.7| 7.0 0.8 SMWD-2010 10+ 0.7] 5.5 0.8 SMWD-5012 12+ 0.7| 7.5 1.0 SMWD-2012 12+ 0.7] 5.5 0.8 SMWD-5014 14+ 0.8| 8.5 1.0 SMWD-2014 14+ 0.8] 5.5 0.8 SMWD-5016 16+ 0.8] 8.5 1.2 SMWD-2016 16+ 0.8] 5.5 0.8 SMWD-5018 iB + 1.0] 8.5 1.2 SMWD-2018 18+ 1.0] 65 1.0 SMWD-5020 20 + 1.0] 10.0 1.4 SMWD-2020 20 + 1.0| 7.5 1 SMWD-5022 22 + 1.0] 10.0 1.4 SMWD-2022 22+ 1.0] 7.5 1.1 SMWD-5024 24 + 1.0] 10.0 1.6 SMWD-2024 24+ 1.0] 8.0 1 SMWD-5026 26 + 1.2] 12.0 1.6 SMWD-2026 26 + 1.2| 8.5 1.2 SMWD-5028 28 + 1.2] 14.0 2.2 SMWD-2028 28 + 1.2| 9.0 1.2 SMWD-5030 30 + 1.5] 14.0 2.4 SMWD-2030 30 + 1.5] 12.0 1.4 SMWD-5035 35 + 1.5] 16.0 2.8 SMWD-2035 35 + 1.5] 13.0 1.6 SMWD-5040 40 + 2.0] 18.0 2.8 SMWD-2040 40 + 2.0] 16.0 2.6 SMWD-5045 45 + 2.0] 18.0 3.0 SMWD-2045 45 + 2.0] 18.0 2.6 SMWD-5050 50 + 2.5] 20.0 3.5 SMWD-2050 50 + 2.5| 18.0 2.8 SMWD-5060 60 + 2.5] 22.0 3.5 SMWD-2060 60 + 2.5] 22.0 3.0 SMWD-5070 70 + 3.0] 25.0 5.0 SMWD-2070 70 + 3.0| 24.0 3.2 SMWD-5080 80 + 3.0] 30.0 y 6.5 SMWD-2080 80 + 3.0] 29.0 3.5 SMWD-5090 90 + 4.0] 35.0 7.0 SMWD-2090 90 + 4.0| 32.0 5.2 SMWD-50100 100 + 4.0] 38.0 500 75 SMWD-20100 | 100 + 4.0] 35.0 5.6 SMWD-20110 | 110 + 4.5] 38.0 5.6 SMWD-20120 | 120+ 4.5] 42.0 5.8 SMWD-20130 | 130 + 5.0| 45.0 5.8 SMWD-20140 | 140 + 5.0] 48.0 6.8 SMWD-20150 | 150 + 5.5] 52.0 6.8 SMWD-20160 | 160 + 5.5] 55.0 6.8 SMWD-20170 | 170 + 6.0| 58.0 7.0 SMWD-20180 | 180 + 6.0] 60.0 7.5 SMWD-20190 | 190 + 7.0| 64.0 7.5 SMWD-20200 | 200 + 8.0] 68.0 8.0 SMWD-20210 | 210 + 8.5} 68.0 8.0 SMWD-20220 | 220 + 9.0] 72.0 8.0 SMWD-20230 | 230 + 9.5] 75.0 8.0 SMWD-20240_ | 240 + 10.0] 80.0 8.0 SMWD-20250_ | 250 + 10.0] 80.0 200 8.0 Special delay lines can be readily manufactured with longer or specific delays, impedances, rise times and package configurations for specific applications. Catalog No. C/033091The Leader in Passive Delay Line and Active Digital Module Technology &* manufactures products in T2L Schottky, T7L Low Power Schottky, Advanced CMOS, ECL 10,000 and ECL 100K Logic Families. @ LC Passive Delay Lines fixed, tapped and programmable @ Active Digital Delay Linesfixed, tapped, multiple and programmable @ Active Digital Delay Modules in SIP, DIP, Standard, Mini-DIP, Thinny-DIP, Hermetically Sealed, Wee DIP, Surface Mount, Leadless Chip, Double and 10 Tap configurations @ Digital Frequency Multiplier Modules @ Pulse Generator Modules and Programmable Pulse Generator Modules @ Noise Filter Modules @ Square Wave Generator Modules @ Memory Timing Modules and Four Phase Clock Modules @ Pixel Clock Generator Modules @ Manchester Encoder and Decoder Modules @ Memory Backup Power Modules All a 2 products are always manufactured of the finest materials obtainable, 100% tested and RWRAERE bs ESA Catalog No. C/033091