Features
High Current Transfer Ratio
(CTR: min. 100% at IF = 10 mA, VCE = 10 V)
Response time
(tr: typ., 3 µs at VCE = 10 V, IC = 2 mA, RL = 100 )
Input-output isolation voltage
(Viso = 3550 Vrms)
Dual-in-line package
UL approved
CSA approved
IEC/EN/DIN EN 60747-5-2 approved
Options available:
– Leads with 0.4" (10.16 mm) spacing (W00)
– Leads bends for surface mounting (300)
– Tape and reel for SMD (500)
– IEC/EN/DIN EN 60747-5-2 approvals (060)
Description
The 4N35 is an optocoupler for general purpose applica-
tions. It contains a light emitting diode optically coupled
to a photo-transistor. It is packaged in a 6-pin DIP pack-
age and available in wide-lead spacing option and lead
bend SMD option. Response time, tr, is typically 3 µs and
minimum CTR is 100% at input current of 10 mA.
Applications
I/O interfaces for computers
System appliances, measuring instruments
Signal transmission between circuits of dierent
potentials and impedances
Functional Diagram
Schematic
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
4N35
Phototransistor Optocoupler General Purpose Type
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
6 5 4
1 2 3
PIN NO. AND INTERNAL
CONNECTION DIAGRAM
1. ANODE
2. CATHODE
3. NC
4. EMITTER
5. COLLECTOR
6. BASE
1
2
ANODE
CATHODE
VF
+
IF6
5
4
BASE
COLLECTOR
EMITTER
IC
2
Ordering Information
4N35-xxxx is UL Recognized with 3550 Vrms for 1 minute per UL1577 and is approved under CSA Component Ac-
ceptance Notice #5, File CA 88324.
RoHS Component Option
Part Rank '0' Surface Gull Tape IEC/EN/DIN
Number 100%<CTR Package Mount Wing & Reel EN 60747-5-2 Quantity
-000E 300 mil DIP-6 65 pcs per tube
-300E 300 mil DIP-6 X X 65 pcs per tube
-500E 300 mil DIP-6 X X X 1000 pcs per reel
4N35 -060E 300 mil DIP-6 X 65 pcs per tube
-360E 300 mil DIP-6 X X X 65 pcs per tube
-560E 300 mil DIP-6 X X X X 1000 pcs per reel
-W00E 400 mil DIP-6 65 pcs per tube
-W60E 400 mil DIP-6 X 65 pcs per tube
To order, choose a part number from the part number column and combine with the desired option from the op-
tion column to form an order entry.
Example 1:
4N35-360E to order product of 300 mil DIP-6 DC Gull Wing Surface Mount package in Tube packaging with
100%<CTR, IEC/EN/DIN EN 60767-5-2 Safety Approval and RoHS compliant.
Example 2:
4N35-W00E to order product of 400 mil DIP-6 DC package in Tube packaging with 100%<CTR and RoHS compli-
ant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
3
Package Outline Drawings
4N35-060E
4N35-W00E
4N35-300E
Y Y W W
6.5 ± 0.5
(0.256)
3.5 ± 0.5
(0.138)
3.3 ± 0.5
(0.13)
0.5 TYP.
(0.02)
0.5 ± 0.1
(0.02)
2.54 ± 0.25
(0.1)
2.8 ± 0.5
(0.110)
7.3 ± 0.5
(0.287) 7.62 ± 0.3
(0.3)
0.26
(0.010)
7.62 ~ 9.98
LEAD FREE
ANODE
DATE CODE
A 4N35 V
DIMENSIONS IN MILLIMETERS AND (INCHES)
Y Y W W
6.5 ± 0.5
(0.256)
3.5 ± 0.5
(0.138)
0.5 ± 0.1
(0.02)
2.54 ± 0.25
(0.1)
2.8 ± 0.5
(0.110)
7.3 ± 0.5
(0.287)
7.62 ± 0.3
(0.3)
0.26
(0.010)
10.16 ± 0.5
(0.4)
LEAD FREE
ANODE
DATE CODE
A 4N35
6.9 ± 0.5
(0.272)
2.3 ± 0.5
(0.09)
DIMENSIONS IN MILLIMETERS AND (INCHES)
1.2 ± 0.1
(0.047)
2.54 ± 0.25
(0.1)
7.3 ± 0.5
(0.287)
7.62 ± 0.3
(0.3)
0.26
(0.010)
10.16 ± 0.3
(0.4)
1.0 ± 0.25
(0.39)
DATE CODE
Y Y W W
6.5 ± 0.5
(0.256)
LEAD FREE
ANODE
A 4N35
3.5 ± 0.5
(0.138)
0.35 ± 0.25
(0.014)
DIMENSIONS IN MILLIMETERS AND (INCHES)
4N35-000E
Y Y W W
6.5 ± 0.5
(0.256)
3.5 ± 0.5
(0.138)
3.3 ± 0.5
(0.13)
0.5 TYP.
(0.02)
0.5 ± 0.1
(0.02)
2.54 ± 0.25
(0.1)
2.8 ± 0.5
(0.110)
7.3 ± 0.5
(0.287) 7.62 ± 0.3
(0.3)
0.26
(0.010)
7.62 ~ 9.98
LEAD FREE
ANODE
DATE CODE
A 4N35
DIMENSIONS IN MILLIMETERS AND (INCHES)
4
Absolute Maximum Ratings
Storage Temperature, TS –55˚C to +150˚C
Operating Temperature, TA –55˚C to +100˚C
Lead Solder Temperature, max. 260˚C for 10 s
(1.6 mm below seating plane)
Average Forward Current, IF 60 mA
Reverse Input Voltage, VR 6 V
Input Power Dissipation, PI 100 mW
Collector Current, IC 100 mA
Collector-Emitter Voltage, VCEO 30 V
Emitter-Collector Voltage, VECO 7 V
Collector-Base Voltage, VCBO 70 V
Collector Power Dissipation 300 mW
Total Power Dissipation 350 mW
Isolation Voltage, Viso 3550 Vrms
(AC for 1 minute, R.H. = 40 ~ 60%)
30 seconds
60 ~ 150 sec 90 sec 60 sec
60 sec
25°C
150°C
200°C
250°C260°C (Peak Temperature)
217°C
Time (sec)
Temperature (°C)
Solder Reow Temperature Prole
1) One-time soldering reow is recommended within
the condition of temperature and time prole shown
at right.
2) When using another soldering method such as in-
frared ray lamp, the temperature may rise partially
in the mold of the device. Keep the temperature on
the package of the device within the condition of (1)
above.
Note: Non-halide ux should be used.
Figure 1. Forward current vs. temperature. Figure 2. Collector power dissipation vs. temperature. Figure 3. Forward current vs. forward voltage.
IF – FORWARD CURRENT – mA
0
TA – AMBIENT TEMPERATURE – °C
-25 75 125
60
25
20
40
100
0 50 100-55
80
4N35 fig 1
P
C
– COLLECTOR POWER DISSIPATION – mW
0
T
A
– AMBIENT TEMPERATURE – °C
-25 75 125
200
25
100
400
0 50 100-55
300
4N35 fig 2
* CTR = x 100%
IC
IF
Electrical Specications (TA = 25˚C)
Parameter Symbol Min. Typ. Max. Units Test Conditions
Forward Voltage VF 1.2 1.5 V IF = 10 mA
Reverse Current IR 10 µA VR = 4 V
Terminal Capacitance Ct 50 pF V = 0, f = 1 KHz
Collector Dark Current ICEO 50 nA VCE = 10 V, IF = 0, TA = 25˚C
500 µA VCE = 30 V, IF = 0, TA = 100˚C
Collector-Emitter Breakdown Voltage BVCEO 30 V IC = 0.1 mA, IF = 0
Emitter-Collector Breakdown Voltage BVECO 7 V IE = 10 µA, IF = 0
Collector-Base Breakdown Voltage BVCBO 70 V IC = 0.1 mA, IF = 0
Collector Current IC 10 mA IF = 10 mA
*Current Transfer Ratio CTR 100 % VCE = 10 V
Collector-Emitter Saturation Voltage VCE(sat) 0.3 V IF = 50 mA, IC = 2 mA
Response Time (Rise) tr 3 10 µs VCC = 10 V, IC = 2 mA
Response Time (Fall) tf 3 10 µs RL = 100
Isolation Resistance Riso 5 x 1010 1 x 1011 DC 500 V
40 ~ 60% R.H.
Floating Capacitance Cf 1 2.5 pF V = 0, f = 1 MHz
6
Figure 4. Current transfer ratio vs. forward current. Figure 5. Collector current vs. collector-emitter volt-
age.
Figure 6. Relative current transfer ratio vs. tempera-
ture.
Figure 7. Collector-emitter saturation voltage vs.
temperature.
Figure 8. Collector dark current vs. temperature. Figure 9. Response time vs. load resistance.
IC – COLLECTOR CURRENT – mA
0
VCE – COLLECTOR-EMITTER VOLTAGE – V
10 15
20
10
30
50
4N35 fig 5
PC (MAX.)
TA = 25°C IF = 15 mA
IF = 10 mA
IF = 5 mA
IF = 2 mA
RELATIVE CURRENT TRANSFER RATIO – %
0
100
50
150
4N35 fig 6
V
CE
= 10 V
I
F
= 10 mA
T
A
– AMBIENT TEMPERATURE – °C
-25 75250 50 100-55
VCE(SAT.) – COLLECTOR-EMITTER
SATURATION VOLTAGE – V
0
TA – AMBIENT TEMPERATURE – °C
-25 7525
0.04
0.12
0 50 100-55
0.08
4N35 fig 7
0.02
0.06
0.10 IC = 2 mA
IF = 50 mA
RESPONSE TIME – µs
0.1
RL – LOAD RESISTANCE – k
0.1 5
1
0.5
0.2
0.5
100
0.2 2 100.05
2
4N35 fig 9
20 50
VCE = 10 V
IC = 2 mA
TA = 25°C
tf
tr
1
5
10
20
50
200
td
ts
I
CEO
– COLLECTOR DARK CURRENT – A
10-13
-25 80 1254020 60 100-55
4N35 fig 8
T
A
– AMBIENT TEMPERATURE – °C
V
CE
= 10 V
10-12
10-11
10-10
10-9
10-8
10-7
10-6
5
5
5
5
5
5
5
CTR – CURRENT TRANSFER RATIO – %
0
I
F
– FORWARD CURRENT – mA
0.2 5 100
100
1
20
60
180
0.5 2 100.1
140
4N35 fig 4
V
CE
= 10 V
T
A
= 25°C
20 50
500 k100 k
40
80
120
160
R
BE
=
Figure 11. Collector-emitter saturation voltage vs.
forward current.
Figure 10. Frequency response.
VOLTAGE GAIN AV – dB
-20
f – FREQUENCY – kHz
1 20 500
-5
5
-15
-10
5
2 10 500.5
0
4N35 fig 10
100 200
R
L
= 10 k
V
CE
= 5 V
I
C
= 2 mA
T
A
= 25°C
R
L
= 1 k
R
L
= 100
0
IF – FORWARD CURRENT – mA
10 15
2
7
50
4N35 fig 11
1
3
4
5
6
VCE(SAT.) – COLLECTOR-EMITTER
SATURATION VOLTAGE – V
TA = 25°C
IC = 0.5 mA
IC = 1 mA
IC = 2 mA
IC = 3 mA
IC = 6 mA
IC = 7 mA
7
4N35 Test Circuit 1
V
CC
R
D
INPUT
R
L
OUTPUT
INPUT
OUTPUT 10%
90%
t
t t
t
d
f
s
r
Test Circuit for Response Time Test Circuit for Frequency Response
4N35 Test Circuit 1
VCC
RD
RL
OUTPUT
~
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0537EN
AV02-0773EN - October 18, 2007