MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3, NSBC123JF3 Digital Transistors (BRT) R1 = 2.2 kW, R2 = 47 kW www.onsemi.com NPN Transistors with Monolithic Bias Resistor Network PIN CONNECTIONS This series of digital transistors is designed to replace a single device and its external resistor bias network. The Bias Resistor Transistor (BRT) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. PIN 3 COLLECTOR (OUTPUT) PIN 1 BASE (INPUT) R1 R2 PIN 2 EMITTER (GROUND) Features * * * * * Simplifies Circuit Design Reduces Board Space Reduces Component Count S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant Symbol Max Unit Collector-Base Voltage VCBO 50 Vdc Collector-Emitter Voltage VCEO 50 Vdc IC 100 mAdc Input Forward Voltage VIN(fwd) 12 Vdc Input Reverse Voltage VIN(rev) 6 Vdc Collector Current - Continuous XX MG G SC-59 CASE 318D STYLE 1 XXX MG G SOT-23 CASE 318 STYLE 6 1 1 MAXIMUM RATINGS (TA = 25C) Rating MARKING DIAGRAMS XX MG G SC-70/SOT-323 CASE 419 STYLE 3 XX M SC-75 CASE 463 STYLE 1 XX M SOT-723 CASE 631AA STYLE 1 XM 1 SOT-1123 CASE 524AA STYLE 1 1 1 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1 XXX M G = Specific Device Code = Date Code* = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION See detailed ordering, marking, and shipping information in the package dimensions section on page 2 of this data sheet. (c) Semiconductor Components Industries, LLC, 2012 March, 2017 - Rev. 5 1 Publication Order Number: DTC123J/D MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3, NSBC123JF3 Table 1. ORDERING INFORMATION Part Marking Package Shipping MUN2235T1G 6M SC-59 (Pb-Free) 3000 / Tape & Reel MMUN2235LT1G, NSVMMUN2235LT1G* AA2 SOT-23 (Pb-Free) 3000 / Tape & Reel MUN5235T1G, SMUN5235T1G* 8M SC-70/SOT-323 (Pb-Free) 3000 / Tape & Reel DTC123JET1G, NSVDTC123JET1G* 8M SC-75 (Pb-Free) 3000 / Tape & Reel DTC123JM3T5G, NSVDTC123JM3T5G* 8M SOT-723 (Pb-Free) 8000 / Tape & Reel V SOT-1123 (Pb-Free) 8000 / Tape & Reel Device NSBC123JF3T5G For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable. PD, POWER DISSIPATION (mW) 300 250 (1) SC-75 and SC-70/SOT323; Minimum Pad (2) SC-59; Minimum Pad (3) SOT-23; Minimum Pad (4) SOT-1123; 100 mm2, 1 oz. copper trace (5) SOT-723; Minimum Pad 200 (1) (2) (3) (4) (5) 150 100 50 0 -50 -25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE (C) Figure 1. Derating Curve www.onsemi.com 2 MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3, NSBC123JF3 Table 2. THERMAL CHARACTERISTICS Characteristic Symbol Max Unit 230 338 1.8 2.7 mW THERMAL CHARACTERISTICS (SC-59) (MUN2235) Total Device Dissipation TA = 25C PD (Note 1) (Note 2) (Note 1) (Note 2) Derate above 25C mW/C Thermal Resistance, Junction to Ambient (Note 1) (Note 2) RqJA 540 370 C/W Thermal Resistance, Junction to Lead (Note 1) (Note 2) RqJL 264 287 C/W TJ, Tstg -55 to +150 C 246 400 2.0 3.2 mW Junction and Storage Temperature Range THERMAL CHARACTERISTICS (SOT-23) (MMUN2235L) Total Device Dissipation TA = 25C PD (Note 1) (Note 2) (Note 1) (Note 2) Derate above 25C mW/C Thermal Resistance, Junction to Ambient (Note 1) (Note 2) RqJA 508 311 C/W Thermal Resistance, Junction to Lead (Note 1) (Note 2) RqJL 174 208 C/W TJ, Tstg -55 to +150 C 202 310 1.6 2.5 mW Junction and Storage Temperature Range THERMAL CHARACTERISTICS (SC-70/SOT-323) (MUN5235) Total Device Dissipation TA = 25C PD (Note 1) (Note 2) (Note 1) (Note 2) Derate above 25C mW/C Thermal Resistance, Junction to Ambient (Note 1) (Note 2) RqJA 618 403 C/W Thermal Resistance, Junction to Lead (Note 1) (Note 2) RqJL 280 332 C/W TJ, Tstg -55 to +150 C 200 300 1.6 2.4 mW Junction and Storage Temperature Range THERMAL CHARACTERISTICS (SC-75) (DTC123JE) Total Device Dissipation TA = 25C PD (Note 1) (Note 2) (Note 1) (Note 2) Derate above 25C Thermal Resistance, Junction to Ambient (Note 1) (Note 2) Junction and Storage Temperature Range mW/C RqJA 600 400 C/W TJ, Tstg -55 to +150 C 260 600 2.0 4.8 mW THERMAL CHARACTERISTICS (SOT-723) (DTC123JM3) Total Device Dissipation TA = 25C PD (Note 1) (Note 2) (Note 1) (Note 2) Derate above 25C Thermal Resistance, Junction to Ambient (Note 1) (Note 2) Junction and Storage Temperature Range 1. 2. 3. 4. FR-4 @ Minimum Pad. FR-4 @ 1.0 x 1.0 Inch Pad. FR-4 @ 100 mm2, 1 oz. copper traces, still air. FR-4 @ 500 mm2, 1 oz. copper traces, still air. www.onsemi.com 3 mW/C RqJA 480 205 C/W TJ, Tstg -55 to +150 C MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3, NSBC123JF3 Table 2. THERMAL CHARACTERISTICS Characteristic Symbol Max Unit 254 297 2.0 2.4 mW THERMAL CHARACTERISTICS (SOT-1123) (NSBC123JF3) PD Total Device Dissipation TA = 25C (Note 3) (Note 4) (Note 3) (Note 4) Derate above 25C mW/C Thermal Resistance, Junction to Ambient (Note 3) (Note 4) RqJA 493 421 C/W Thermal Resistance, Junction to Lead (Note 3) RqJL 193 C/W TJ, Tstg -55 to +150 C Junction and Storage Temperature Range 1. 2. 3. 4. FR-4 @ Minimum Pad. FR-4 @ 1.0 x 1.0 Inch Pad. FR-4 @ 100 mm2, 1 oz. copper traces, still air. FR-4 @ 500 mm2, 1 oz. copper traces, still air. Table 3. ELECTRICAL CHARACTERISTICS (TA = 25C, unless otherwise noted) Characteristic Symbol Min Typ Max - - 100 - - 500 - - 0.2 50 - - 50 - - 80 140 - - - 0.25 - 0.6 0.5 1.1 0.8 - - - 0.2 4.9 - - Unit OFF CHARACTERISTICS Collector-Base Cutoff Current (VCB = 50 V, IE = 0) ICBO Collector-Emitter Cutoff Current (VCE = 50 V, IB = 0) ICEO Emitter-Base Cutoff Current (VEB = 6.0 V, IC = 0) IEBO Collector-Base Breakdown Voltage (IC = 10 mA, IE = 0) V(BR)CBO Collector-Emitter Breakdown Voltage (Note 5) (IC = 2.0 mA, IB = 0) V(BR)CEO nAdc nAdc mAdc Vdc Vdc ON CHARACTERISTICS hFE DC Current Gain (Note 5) (IC = 5.0 mA, VCE = 10 V) Collector *Emitter Saturation Voltage (Note 5) (IC = 10 mA, IB = 1.0 mA) VCE(sat) Input Voltage (off) (VCE = 5.0 V, IC = 100 mA) Vi(off) Input Voltage (on) (VCE = 0.3 V, IC = 5.0 mA) Vi(on) Output Voltage (on) (VCC = 5.0 V, VB = 2.5 V, RL = 1.0 kW) VOL Output Voltage (off) (VCC = 5.0 V, VB = 0.5 V, RL = 1.0 kW) VOH Vdc Vdc Vdc Vdc Vdc Input Resistor R1 1.5 2.2 2.9 Resistor Ratio R1/R2 0.038 0.047 0.056 kW Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 5. Pulsed Condition: Pulse Width = 300 msec, Duty Cycle v 2%. www.onsemi.com 4 MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3, NSBC123JF3 1000 1 VCE = 10 V IC/IB = 10 75C hFE, DC CURRENT GAIN VCE(sat), COLLECTOR-EMITTER VOLTAGE (V) TYPICAL CHARACTERISTICS MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3 75C 0.1 -25C 25C 0.01 0.001 0 10 20 40 30 IC, COLLECTOR CURRENT (mA) 100 1 10 IC, COLLECTOR CURRENT (mA) Figure 2. VCE(sat) vs. IC 100 Figure 3. DC Current Gain 3.6 100 2.8 IC, COLLECTOR CURRENT (mA) f = 10 kHz IE = 0 A TA = 25C 3.2 2.4 2 1.6 1.2 0.8 0.4 0 25C 10 75C 1 TA = -25C 0.1 0.01 VO = 5 V 0.001 0 10 20 30 40 50 VR, REVERSE BIAS VOLTAGE (VOLTS) 3 4 5 6 7 Vin, INPUT VOLTAGE (V) Figure 4. Output Capacitance Figure 5. Output Current vs. Input Voltage 0 1 2 10 Vin, INPUT VOLTAGE (V) Cob, CAPACITANCE (pF) 25C 10 1 50 TA = -25C 75C 1 25C TA = -25C VO = 0.2 V 0.1 0 40 10 20 30 IC, COLLECTOR CURRENT (mA) Figure 6. Input Voltage vs. Output Current www.onsemi.com 5 50 8 9 10 MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3, NSBC123JF3 1000 1 VCE = 10 V IC/IB = 10 hFE, DC CURRENT GAIN VCE(sat), COLLECTOR-EMITTER VOLTAGE (V) TYPICAL CHARACTERISTICS NSBC123JF3 25C 150C 0.1 -55C 0.01 0 10 20 40 30 IC, COLLECTOR CURRENT (mA) 100 -55C 10 1 50 1 10 IC, COLLECTOR CURRENT (mA) Figure 7. VCE(sat) vs. IC 100 Figure 8. DC Current Gain 2.4 100 2 IC, COLLECTOR CURRENT (mA) f = 10 kHz IE = 0 A TA = 25C 1.6 1.2 0.8 0.4 0 150C 10 -55C 1 25C 0.1 0.01 VO = 5 V 0.001 0 10 20 30 40 VR, REVERSE BIAS VOLTAGE (V) 50 0 Figure 9. Output Capacitance 0.5 1 1.5 2 Vin, INPUT VOLTAGE (V) 10 25C -55C 1 150C VO = 0.2 V 0.1 0 2.5 Figure 10. Output Current vs. Input Voltage 100 Vin, INPUT VOLTAGE (V) Cob, CAPACITANCE (pF) 150C 25C 10 20 30 40 IC, COLLECTOR CURRENT (mA) Figure 11. Input Voltage vs. Output Current www.onsemi.com 6 50 3 MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3, NSBC123JF3 PACKAGE DIMENSIONS SC-59 CASE 318D-04 ISSUE H D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3 HE 1 DIM A A1 b c D E e L HE E 2 b e MILLIMETERS NOM MAX 1.15 1.30 0.06 0.10 0.43 0.50 0.14 0.18 2.90 3.10 1.50 1.70 1.90 2.10 0.40 0.60 2.80 3.00 STYLE 1: PIN 1. BASE 2. EMITTER 3. COLLECTOR C A MIN 1.00 0.01 0.35 0.09 2.70 1.30 1.70 0.20 2.50 L A1 SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.4 0.094 1.0 0.039 0.8 0.031 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. www.onsemi.com 7 MIN 0.039 0.001 0.014 0.003 0.106 0.051 0.067 0.008 0.099 INCHES NOM 0.045 0.002 0.017 0.005 0.114 0.059 0.075 0.016 0.110 MAX 0.051 0.004 0.020 0.007 0.122 0.067 0.083 0.024 0.118 MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3, NSBC123JF3 PACKAGE DIMENSIONS SOT-23 (TO-236) CASE 318-08 ISSUE AR D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF THE BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 0.25 3 E 1 2 T HE DIM A A1 b c D E e L L1 HE T L 3X b L1 VIEW C e TOP VIEW A A1 SIDE VIEW c SEE VIEW C MIN 0.89 0.01 0.37 0.08 2.80 1.20 1.78 0.30 0.35 2.10 0 MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.14 0.20 2.90 3.04 1.30 1.40 1.90 2.04 0.43 0.55 0.54 0.69 2.40 2.64 --- 10 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR END VIEW RECOMMENDED SOLDERING FOOTPRINT* 3X 2.90 3X 0.90 0.95 PITCH 0.80 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. www.onsemi.com 8 MIN 0.035 0.000 0.015 0.003 0.110 0.047 0.070 0.012 0.014 0.083 0 INCHES NOM 0.039 0.002 0.017 0.006 0.114 0.051 0.075 0.017 0.021 0.094 --- MAX 0.044 0.004 0.020 0.008 0.120 0.055 0.080 0.022 0.027 0.104 10 MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3, NSBC123JF3 PACKAGE DIMENSIONS SC-70 (SOT-323) CASE 419-04 ISSUE N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. D e1 DIM A A1 A2 b c D E e e1 L HE 3 E HE 1 2 b e A 0.05 (0.002) 0.30 0.10 1.80 1.15 1.20 0.20 2.00 MILLIMETERS NOM MAX 0.90 1.00 0.05 0.10 0.70 REF 0.35 0.40 0.18 0.25 2.10 2.20 1.24 1.35 1.30 1.40 0.65 BSC 0.38 0.56 2.10 2.40 STYLE 3: PIN 1. BASE 2. EMITTER 3. COLLECTOR c A2 MIN 0.80 0.00 L A1 SOLDERING FOOTPRINT* 0.65 0.025 0.65 0.025 1.9 0.075 0.9 0.035 0.7 0.028 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. www.onsemi.com 9 MIN 0.032 0.000 0.012 0.004 0.071 0.045 0.047 0.008 0.079 INCHES NOM 0.035 0.002 0.028 REF 0.014 0.007 0.083 0.049 0.051 0.026 BSC 0.015 0.083 MAX 0.040 0.004 0.016 0.010 0.087 0.053 0.055 0.022 0.095 MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3, NSBC123JF3 PACKAGE DIMENSIONS SC-75/SOT-416 CASE 463 ISSUE G NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. -E- 2 3 b 3 PL 0.20 (0.008) e DIM A A1 b C D E e L HE -D- 1 M D HE C 0.20 (0.008) E STYLE 1: PIN 1. BASE 2. EMITTER 3. COLLECTOR A L MILLIMETERS MIN NOM MAX 0.70 0.80 0.90 0.00 0.05 0.10 0.15 0.20 0.30 0.10 0.15 0.25 1.55 1.60 1.65 0.70 0.80 0.90 1.00 BSC 0.10 0.15 0.20 1.50 1.60 1.70 A1 SOLDERING FOOTPRINT* 0.356 0.014 1.803 0.071 0.787 0.031 0.508 0.020 1.000 0.039 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. www.onsemi.com 10 INCHES NOM MAX 0.031 0.035 0.002 0.004 0.008 0.012 0.006 0.010 0.063 0.065 0.031 0.035 0.04 BSC 0.004 0.006 0.008 0.060 0.063 0.067 MIN 0.027 0.000 0.006 0.004 0.061 0.027 MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3, NSBC123JF3 PACKAGE DIMENSIONS SOT-723 CASE 631AA ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. -X- D A b1 -Y- 3 E 1 HE 2 2X 2X b e C 0.08 X Y SIDE VIEW TOP VIEW 3X DIM A b b1 C D E e HE L L2 L 1 3X MILLIMETERS MIN NOM MAX 0.45 0.50 0.55 0.15 0.21 0.27 0.25 0.31 0.37 0.07 0.12 0.17 1.15 1.20 1.25 0.75 0.80 0.85 0.40 BSC 1.15 1.20 1.25 0.29 REF 0.15 0.20 0.25 STYLE 1: PIN 1. BASE 2. EMITTER 3. COLLECTOR L2 BOTTOM VIEW RECOMMENDED SOLDERING FOOTPRINT* 2X 0.40 2X 0.27 PACKAGE OUTLINE 1.50 3X 0.52 0.36 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. www.onsemi.com 11 MUN2235, MMUN2235L, MUN5235, DTC123JE, DTC123JM3, NSBC123JF3 PACKAGE DIMENSIONS SOT-1123 CASE 524AA ISSUE C -X- D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. -Y- 1 3 E 2 TOP VIEW A c DIM A b b1 c D E e HE L L2 HE SIDE VIEW 3X STYLE 1: PIN 1. BASE 2. EMITTER 3. COLLECTOR b L2 MILLIMETERS MIN MAX 0.34 0.40 0.15 0.28 0.10 0.20 0.07 0.17 0.75 0.85 0.55 0.65 0.35 0.40 0.95 1.05 0.185 REF 0.05 0.15 0.08 X Y e 2X 3X b1 L BOTTOM VIEW SOLDERING FOOTPRINT* 1.20 3X 0.34 0.26 1 0.38 2X 0.20 PACKAGE OUTLINE DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 12 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative DTC123J/D