$16 UWG German Law. Offenders will be held liable The copying. distribution and utilistion of this document as well as the communication of the contents to others for the payment of damages according to 19 UWG German Law. All rights reserved. in particular the right to Carry out patent. utility model or ornamental design registrations. without expressed authorization is prohibited according to gen verpflichten zu Schadenersalz (19 UWG). Alle Rechte -. Gebrauchsmuster- oder Geschmacksmusteranmeldungen durchzuf ihren. D-71083 Herrenberg Weilergabe sowie Vervielf &tigung dieses Dokuments. Verwertung und Milteilung seines_Inhalts gem 18 UWG verboten. Heisenbergstrasse 1 soweit nicht ausdricklich gestattet. Zuwiderhandlu vorbehalten, insbesondere das Recht, Patent CONINVERS GmbH Mechanical data (according to IEC 61076-2-101) Material further information: no. of poles / coding |4 7A contacts / surface |CuZn with gold layer - see technical data M12-3 contact termination dip solder / socket |contact carrier PA6T/66 contact-@ 4xD1mm colour black temperature range -40C to +85C sealing gasket FKM protection class IP67 mating cycles >100 While mounting the insulating body with o-ring into the housing, the axial mounting force on each connnector shouldn't be higher than 80N. Avoid radial forces! 26,3 pin 5 Locked after 5mm | | | | iE tr 15.9 \e ie _I | 8,5 | D 1.0.05 19,2 o-ring enclosed wen separately All specified data refers to the mounted M12 installation plugs >IP54 and requires that the connector pair be correctly plugged and locked. Influences from wires, cables or PCB mounting are also fo be faken info consideration. drilling plan 15:40,02 Component side (front view PC -Board) p94 D2 70:08 | D205 4-0,05 12,5 9,2 . 20 _ front panel Design of the solder holes ( * measure X depends on the provided by the customer, according to installed housing, solder - process (THR, wave) see installation recommendation of the housing series M12 DSIV general tolerance t . ag. scale: acc. to DIN ISO 2768-c echnical changes reserved Index 1 / 2012-07-02 2.1 date name : Hesign|2012-07-02| Thumm series DSIV chk. M12-installation plug angled 4 4-pole socket/A-coding/SCO/flat gasket ee drawing-no.: BS-04S2ND2M400 doc.-no.: |00670477 EMIX | order-no.: 1.36564 article designation: SACC-DSIV-FS-4CON-L9O0 SCO $16 UWG German Law. Offenders will be held liable The copying. distribution and utilistion of this document as well as the communication of the contents to others for the payment of damages according to 19 UWG German Law. All rights reserved. in particular the right to Carry out patent. utility model or ornamental design registrations. without expressed authorization is prohibited according to gen verpflichten zu Schadenersalz (19 UWG). Alle Rechte -. Gebrauchsmuster- oder Geschmacksmusteranmeldungen durchzuf ihren. D-71083 Herrenberg Mechanical data (according to IEC 61076-2-101) further information: pccicing_ thread | Nt2_ SPEEDCON - see installation recommendation SACC-M12-SCO NUT IC flange housing GD-Zn, nickel-plated sealing gasket HNBR, EPDM nut brass, nickel-plated temperature range -40C to +85C M1?x11 o-ring 8x1.3 4h, SpeedCon enclosed separatel @ _ | flat gasket | 1.6x11.5 | oO | = ! 3 | Lo | ! ! ! L ] Ln { | t dyin. A nut M12x N enclosed separately M12x1 Weilergabe sowie Vervielf &tigung dieses Dokuments. Verwertung und Milteilung seines_Inhalts gem 18 UWG verboten. Heisenbergstrasse 1 soweit nicht ausdricklich gestattet. Zuwiderhandlu vorbehalten, insbesondere das Recht, Patent CONINVERS GmbH All specified data refers to the mounted M12 installation plugs =/P54 and requires that the connector pair be correctly plugged and locked. Influences from wires, cables or PCB mounting are also to be taken into consideration. L tol . scale: ate to DIN ISO 2768- technical changes reserved Index 1 / 2012-07-02 2 date name . Hesign|2012-07-02| Thumm series DSIV chk. M12-installation plug angled 2 4-pole socket/A-coding/SCO/flat gasket ae drawing-no.: BS-04S2ND 2M400 doc.-no.: }00670477 PHNIX lorder-no.: 1436564 article designation: SACC-DSIV-FS-4CON-L9O0 SCO