SPECIFICATION CONTROL DRAWING Product Revision Product Name B-070-12-11-01 oA min A 9.00 ( 0.355) Product Dimensions oB oC min min 5.30 (0.210) 6.40 (0.250) L max 29.00 (1.142) oE min 3.50 (0.140) Cable Dimensions oD F max max max 6.40 9.00 5.30 (0.250) (0.355) (0.210) M1.00 (M0.04) 12.00 (0.470) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn96 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 3. SHIELD: Solder impregnated, flux coated, tin plated copper braid. SOLDER: TYPE Sn96 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. APPLICATION 1. These controlled soldering devices are designed for shield termination of a tin, silver or nickel plated shielded cable, having an insulation rated for at least 125C. 2. Temperature range: -55C to +175C. 3. Installation Procedure: RPIP-500-07. For best results, prepare the cable as shown: TITLE : 305 Constitution Drive Menlo Park, CA 94025, USA Unless otherwise specified dimensions are in millimeters. Inches dimensions are in between brackets. Tyco Electronics reserves the right to ANGLES: N/A TOLERANCES: amend this drawing at any time. Users 0.00 N/A should evaluate the suitability of the ROUGHNESS IN 0.0 N/A product for their application. MICRON 0 N/A SOLDERSHIELD DEVICE DOCUMENT NO.: B-070-12-11-01 DCR NUMBER: REPLACES: D020392 PREPARED BY: DATE: PROD. REV. DOC ISSUE: m. foronda 7-Oct-02 A 2 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None D010407 SIZE: A SHEET: 1 of 1