SPECIFICATION CONTROL DRAWING
305 Constitution Drive
Menlo Park, CA 94025, USA
TITLE :
SOLDERSHIELD DEVICE
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets. DOCUMENT NO.: B-070-12-11-01
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
DCR NUMBER:
D020392 REPLACES:
D010407
PREPARED BY:
m. for onda DATE:
7-Oct-02 PROD. REV.
A DOC ISSUE:
2 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions Cable Dimensions
øE Product
Name øA
min øB
min øC
min L
max min max øD
max F
max M±1.00
(M±0.04)
B-070-12-11-01 A 9.00
( 0.355) 5.30
(0.210) 6.40
(0.250) 29.00
(1.142) 3.50
(0.140) 6.40
(0.250) 9.00
(0.355) 5.30
(0.210) 12.00
(0.470)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn96 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
3. SHIELD: Solder impregnated, flux coated, tin plated copper braid.
SOLDER: TYPE Sn96 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
APPLICATION
1. These controlled soldering devices are designed for shield termination of a tin, silver or nickel plated shielded cable, having
an insulation rated for at least 125°C.
2. Temperature range: -55°C to +175°C.
3. Installation Procedure: RPIP-500-07.
For best results, prepare the cable as shown:
