Features Regulated Converters 4:1 Wide Input Voltage Range 8 Watts Regulated Output Power 1.6kVDC Isolation Over Current and Over Voltage Protection Five-Sided Shield No Derating to 74C Standard DIP24 and SMD-Pinning Efficiency to 8 8 % Description The RP08-AW series wide range input DC/DC converterc are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The DIP24 package is available in both pinned and SMD case styles and meets military standards for thermal shock and vibration tolerance. POWERLINE DC/DC-Converter 8 Watt DIP24/SMD, Single & Dual Output Selection Guide 24V and 48V Wide Input Types Input Range VDC Output Voltage VDC Output Current mA Input(4,5) Current mA RP08-243.3SAW** 9-36 3.3 2400 40/407 85 1330F RP08-2405SAW** 9-36 5 1600 40/402 87 1330F RP08-2412SAW** 9-36 12 666 25/407 86 288F RP08-2415SAW** 9-36 15 533 25/407 86 200F RP08-483.3SAW** 18-75 3.3 2400 20/204 85 1330F RP08-4805SAW** 18-75 5 1600 20/201 87 1330F RP08-4812SAW** 18-75 12 666 13/201 87 288F RP08-4815SAW** 18-75 15 533 13/198 88 200F RP08-2405DAW** 9-36 5 800 20/417 84 900F RP08-2412DAW** 9-36 12 333 25/407 84 133F RP08-2415DAW** 9-36 15 267 25/407 86 90F RP08-4805DAW** 18-75 5 800 10/208 84 900F RP08-4812DAW** 18-75 12 333 13/203 85 133F RP08-4815DAW** 18-75 15 267 13/201 87 90F Part Number DIP24 (SMD) Efficiency(6) Capacitive(7) Load max. % UL-60950-1 Certified E196683 RP08-W ** add Suffix SMD for SMD package Derating Graph (Ambient Temperature) RP08-4805SAW 125 100 Output Power (%) 75 50 75Vin Natural Convection Nom Vin 25 0 -40 -25 -10 0 Derating graphs are valid only for the shown part numbers. If you need detailed deratinginformation about a part-number not shown here please contact our technical support service at info@recom-development.at 50 60 70 80 90 100 110 78 Ambient Temperature Range (C) Please Read Application Notes www.recom-international.com REV:0/2009 P-5 RP08-S_DAW Series POWERLINE DC/DC-Converter Specifications (typical at nominal input and 25C unless otherwise noted) Input Voltage Range 24V nominal input 48V nominal input 9-36VDC 18-75VDC Input Filter Pi Type Input Surge Voltage (100ms max) 50VDC (24V Typ), 100VDC (48V Typ) Input Reflected Ripple (nominal Vin and full load) Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see note 1) DC-DC OFF Nominal input 20mAp-p DC-DC ON Short or 0V < Vr < 1.2V 2.5mA Output Power 8W max. Output Voltage Accuracy (full Load and nominal Vin) 1% Minimum Load Line Regulation (low line, high line at full load) Load Regulation (0% to 100% full load) 0% 0.2% 0.5% 1% Single Dual Cross Regulation Dual Output (asymmetrical 25%<>100% load) 5% Ripple and Noise (20MHz bandwith) 50mVp-p Temperature Coefficient 0.02%/C max. Transient Response (25% load step change) Input Voltage Variation, dv/dt 250s complies with ETS300 132, part 4.4 RP08-W Over Load Protection (% of full load at nominal Vin) 5V/ms 150% typ Overvoltage Protection (Single) Undervoltage Lockout Zener Diode Clamp See Application Notes Short Circuit Protection Continuous, automatic recovery Efficiency Isolation Voltage 450ms typ. Open or 3.0V < Vr < 12V Remote OFF input current see Selection Guide" table In to Out and I/O to case 1600VDC min. Isolation Resistance 10 G min. Isolation Capacitance 1500pF max. Operating Frequency Operating Temperature Range (no derating) 5, 12, 15, 12, 15V 3.3, 5V 300kHz typ. -40C to +78C -40C to +74C Maximum Case Temperature +105C Storage Temperature Range -55C to +125C Thermal Impedance Natural convection Case Material 20C/Watt Nickel-coated copper with non-conductive black plastic base Potting Material Weight Conducted Emissions (see note 3) Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity Epoxy (UL94-V0) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Thermal Shock MIL-STD-810D Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z Relative Humidity MTBF (see note 2) P-6 18g (DIP), 20g (SMD) Class A Class A Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A 5% to 95% RH Bellcore-TR-NWT-000332 REV: 0/2009 2350 x 103 hours www.recom-electronic.com RP08-S_DAW Series POWERLINE DC/DC-Converter Notes : 1. The ON/OFF control pin voltage is referenced to negative input. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). 3. Vin=24V, fit a 1.0F 1210 MLCC capacitor across the input pins to meet EN55022 Class A. Vin=48V, fit a 0.47F 1210 MLCC capacitor across the input pins to meet EN55022 Class A. See application notes for Class B Filter suggestion. 4. Typical value at nominal input voltage and no load. 5. Maximum value at nominal input voltage and full load 6. Typical value at nominal input voltage and full load. 7. Test by minimum Vin and constant resistor load. Package Style and Pinning (mm) DIP24 Package Style 31.80 3rd angle projection 20.30 10.20 3.8 2 5.10 20.30 2.54 15.20 Pin Connections 0.25 x 0.50 Rectangular Pin 9 1 2 3 11 Bottom View Pin Pitch Tolerance 0.35 mm 16 23 22 Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin RP08-W Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin NC = No Connection 14 SMD Package Style 32.00 20.30 SMD Package Style 31.40 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 11.20 2.54 10.90 3.81 21.30 6.35 Pin Connections 25.40 Pin area 0.1 x 0.50 2.54 0.50 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 24.14 24 23 22 21 20 16 15 14 13 11 x 2.54 www.recom-international.com Top View 1 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin Others NC NC = No Connection Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin NC Pin Pitch Tolerance 0.35 mm 27.94 REV:0/2009 P-7