Data Sheet PS9013 R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 1 Mbps, OPEN COLLECTOR OUTPUT, HIGH CMR, IPM DRIVER, 5-PIN SSOP (LSO5) PHOTOCOUPLER DESCRIPTION The PS9013 is an optically coupled isolator containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip.The PS9013 is specified high CMR and pulse width distortion with operating temperature. It is suitable for IPM drive. FEATURES PIN CONNECTION Long creepage distance (8 mm MIN.) (Top View) High common mode transient immunity (CMH, CML = 50 kV/s MIN.) 5 4 3 Operating Ambient Temperature (125 C MAX.) 1. Anode High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.) 2. Cathode Maximum propagation delays (tPLH - tPHL = 270 ns TYP.) 3. GND High isolation voltage (BV = 5 000 Vr.m.s.) 4. VO 5. VCC Open collector output Embossed tape product : PS9013-F3: 3 000 pcs/reel 1 2 Pb-Free product Safety standards UL approved: UL1577, Double protection CSA approved: CA5A, CAN/CSA-C22.2 60065, CAN/CSA-C22.2 60950-1, Reinforced insulation) VDE approval: DIN EN 60747-5-5 (Option) APPLICATIONS IPM Driver General purpose inverter Start of mass production Mar.2016 R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Page 1 of 15 PS9013 Chapter Title PACKAGE DIMENSIONS (UNIT: mm) Weight0.119g (typ.) PHOTOCOUPLER CONSTRUCTION Parameter Air Distance Outer Creepage Distance Isolation Distance R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 MIN. 8 mm 8 mm 0.15 mm Page 2 of 15 PS9013 Chapter Title BLOCK DIAGRAM 5 1 4 2 3 Shield LED Output ON L OFF H MARKING EXAMPLE 9013 9013 R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Page 3 of 15 PS9013 Chapter Title ORDERING INFORMATION Part Number Order Number PS9013 PS9013-F3 PS9013-Y-AX PS9013-Y-F3-AX PS9013-V PS9013-V-F3 PS9013-Y-V-AX PS9013-Y-V-F3-AX Note: Solder Plating Specification Pb-Free and Halogen Free (Ni/Pd/Au) Packing Style Safety Standard Approval 20 pcs (Tape 20 pcs cut) Embossed Tape 3 000 pcs/reel 20 pcs (Tape 20 pcs cut) Embossed Tape 3 000 pcs/reel Standard products (UL,CSA approved) Application Part Number*1 PS9013 UL,CSA approved DIN EN 60747-5-5 (VDE 0884-5): 2011-11 approved (Option) *1. For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Forward Current*1 Reverse Voltage Detector Supply Voltage Output Voltage Output Current Power Dissipation*2 Isolation Voltage *3 Operating Ambient Temperature Storage Temperature Diode Symbol IF VR VCC VO IO PC BV TA Tstg Ratings 25 5 0.5 to +30 0.5 to +30 15 250 5 000 40 to +125 55 to +150 Unit mA V V V mA mW Vr.m.s. C C Notes: *1. Reduced to 0.325 mA/C at TA = 85C or more. *2. Reduced to 4.15 mW/C at TA = 85C or more *3. AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-3 shorted together, 4-6 shorted together. RECOMMENDED OPERATING CONDITIONS Parameter Supply Voltage Forward Current (ON) Forward Voltage (OFF) R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Symbol VCC IF (ON) VF (OFF) MIN. 4.5 8 -2 TYP. 15 MAX. 25 12 0.8 Unit V mA V Page 4 of 15 PS9013 Chapter Title ELECTRICAL CHARACTERISTICS (TA = -40 to +125C, VCC = 15 V, unless otherwise specified) Parameter Diode Symbol Forward Voltage Conditions VF IF = 10 mA Reverse Current IR VR = 3 V Terminal Capacitance Ct V = 0 V, f = 1 MHz, TA = 25C MIN. TYP.*1 MAX. Unit 1.35 1.56 1.75 V 10 A 30 pF Detector Low Level Output Voltage VOL IF = 10 mA, IOL = 2.4 mA 0.13 0.6 V High Level Output Current IOH VCC = VO = 20 V, VF = 0.8 V 0.01 50 A High Level Supply Current ICCH VCC = 20 V, VF = 0.8 V, VO = open 1.0 1.3 mA Low Level Supply Current ICCL VCC = 20 V, IF = 10 mA, VO = open 1.0 1.3 mA 1.5 5.0 mA Coupled Threshold Input Current (H L) Isolation Resistance VO = 0.8 V, IO = 0.75 mA IFHL RI-O VI-O = 1 kVDC, RH = 40 to 60%, TA = 25C Isolation Capacitance CI-O V = 0 V, f = 1 MHz, TA = 25C 0.7 Propagation Delay Time (H L)*2 tPHL IF = 10 mA, RL = 20 k, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V 250 500 Propagation Delay Time (L H)*2 tPLH 520 750 270 650 270 650 Maximum Propagation Delays tPLHtPHL Pulse Width Distortion (PWD)*2 tPHL-tPLH 1011 200 pF ns TA = 25C, IF = 0 mA, VO > 3.0 V, Common Mode Transient Immunity at High Level Output*3 CMH VCM = 1.5 kV, RL = 20 k, CL = 100 pF 50 kV/s 50 kV/s TA = 25C, IF = 10 mA, VO < 1.0 V, Common Mode Transient Immunity at Low Level Output*3 CML VCM = 1.5 kV, RL = 20 k, CL = 100 pF Notes*: 1. Typical values at TA = 25C. 2. Test circuit for propagation delay time 0.1 F (PW = 10 s, Duty cycle = 1/10) Input (Monitor) IF (ON) 50% IF (ON) Input VCC = 15 V Pulse input (IF = 10 mA) RL = 20 k VO (Monitor) CL = 100 pF 15 V Output VTHLH = 2.0 V 47 VTHHL = 1.5 V tPHL VOL tPLH CL includes probe and stray wiring capacitance. 3. Test circuit for common mode transient immunity 1.5 kV VCM 90% SW IF 0.1 F B A VCC = 15 V RL = 20 k VO (Monitor) CL = 100 pF 10% 0V tr VO (Switch A: IF = 0 mA) VCM VO (Switch B: IF = 10 mA) tf 15 V 3.0 V 1.0 V VOL CL includes probe and stray wiring capacitance. R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Page 5 of 15 PS9013 Chapter Title MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 30 25 20 15 10 5 0 0 25 75 50 100 125 150 Detector Power Dissipation PC (mW) Maximum Forward Current IF (mA) TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 300 250 200 150 100 50 0 0 25 50 75 100 125 150 Ambient Temperature TA () High Level Supply Current ICCH (mA) Low Level Supply Current ICCL (mA) Ambient Temperature TA () SUPPLY CURRENT vs. AMBIENT TEMPERATURE 2.00 VCC=20V VO=Open ICCH:VF=0.8V ICCL:IF=10mA 1.75 1.50 1.25 1.00 0.75 ICCH ICCL 0.50 0.25 0.00 -50 -25 0 25 50 75 100 125 150 THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE 5.0 VCC=15V VO=0.8V IO=0.75mA 4.0 3.0 2.0 1.0 0.0 -50 -25 0 25 50 75 100 125 150 Ambient Temperature TA () Low Level Output Voltage VOL (V) Threshold Input Current IFHL (mA) Ambient Temperature TA () 0.6 LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE Vcc=15V IF=10mA Io=2.4mA 0.5 0.4 0.3 0.2 0.1 0.0 -50 -25 0 25 50 75 100 125 150 Ambient Temperature TA () Remark The graphs indicate nominal characteristics. R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Page 6 of 15 PS9013 Chapter Title TA=125 Output Current IO (mA) 14 12 TA=25 10 8 TA=40 6 4 2 0 VO=0.6V 0.0 10.0 5.0 20.0 15.0 PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. SUPPLY VOLTAGE 2000 tPLH 1800 IF=10mA CL=100pF RL=20K 1600 1400 1200 1000 800 600 400 tPHL 200 0 |tPHLtPLH| 10 0 20 30 PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. FORWARD CURRENT 700 600 tPLH 500 400 |tPHLtPLH| 300 200 tPHL Vcc=15V CL=100pF RL=20K 100 0 1800 1600 tPLH 1400 1200 1000 800 600 400 tPHL 200 0 0 100 200 300 15 20 25 700 600 tPLH 500 400 PWD 300 200 tPHL Vcc=15V IF=10mA CL=100pF RL=20K 100 0 -50 -25 0 25 50 75 100 125 150 Ambient Temperature TA () PROPAGATION DELAY TIME vs. LOAD CAPACITANCE IF=10mA Vcc=15V RL=20K 10 Forward Current IF (mA) Supply Voltage VCC (V) 2000 5 0 PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE 400 500 Load Capacitance CL (pF) Propagation Delay Time tPHL, tPLH (ns) Maximum Propagation Delays |tPHL-tPLH |(ns) Propagation Delay Time tPHL, tPLH (ns) Propagation Delay Time tPHL, tPLH (ns) Maximum Propagation Delays |tPHL-tPLH|(ns) Forward Current IF (mA) Pulse Width Distortion PWD (ns) 16 Propagation Delay Time tPHL, tPLH (ns) OUTPUT CURRENT vs. FORWARD CURRENT Propagation Delay Time tPHL, tPLH (ns) Maximum Propagation Delays |tPHL-tPLH|(ns) TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. LOAD RESISTANCE 1200 tPLH IF=10mA Vcc=15V CL=100pF 1000 800 |tPHLtPLH| 600 400 tPHL 200 0 0 10 20 30 40 50 Load Resistance RL (K) Remark The graphs indicate nominal characteristics. R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Page 7 of 15 PS9013 Chapter Title Propagation Delay Time tPHL, tPLH (ns) Maximum Propagation Delays | tPHL-tPLH |(ns) TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. LOAD RESISTANCE 600 tPLH IF=10mA Vcc=15V CL=15pF 500 |tPHLtPLH| 400 300 200 tPHL 100 0 0 5 10 15 20 25 Load Resistance RL (K) Remark The graphs indicate nominal characteristics. R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Page 8 of 15 PS9013 Chapter Title TAPING SPECIFICATIONS (UNIT: mm) Tape Direction Outline and Dimensions (Taps) Outline and Dimensions (Reel) Packing:3000 pcs/reel R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Page 9 of 15 PS9013 Chapter Title RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) Remark All dimensions in this figure must be evaluated before use. R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Page 10 of 15 PS9013 Chapter Title NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron * Peak Temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Page 11 of 15 PS9013 Chapter Title USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of more than 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Page 12 of 15 PS9013 Chapter Title SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.6 UIORM., Pd 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 UIORM., Pd 5 pC Highest permissible overvoltage Unit UIORM Upr 1 130 1 808 Vpeak Vpeak Upr 2 119 Vpeak UIOTM 8 000 Vpeak Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) Spec. 40/125/21 2 CTI 400 Storage temperature range Tstg -55 to +150 C Operating temperature range TA -40 to +125 C Ris MIN. Ris MIN. 1012 1011 Tsi Isi Psi 175 400 700 C mA mW Ris MIN. 109 Material group (DIN EN 60664-1 VDE0110 Part 1) Isolation resistance, minimum value VIO = 500 V dc at TA = 25C VIO = 500 V dc at TA MAX. at least 100C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 II Page 13 of 15 PS9013 R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Chapter Title Page 14 of 15 PS9013 Caution Chapter Title GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. R08DS0136EJ0100 Rev.1.00 Mar 11, 2016 Page 15 of 15 Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. California Eastern Laboratories, Inc. 4590 Patrick Henry Drive, Santa Clara, California 95054-1817, U.S.A. Tel: +1-408-919-2500, Fax: +1-408-988-0279 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-6503-0, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333 Tel: +86-21-2226-0888, Fax: +86-21-2226-0999 Renesas Electronics Hong Kong Limited Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2265-6688, Fax: +852 2886-9022 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949 Tel: +65-6213-0200, Fax: +65-6213-0300 Renesas Electronics Malaysia Sdn.Bhd. Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics India Pvt. Ltd. No.777C, 100 Feet Road, HAL II Stage, Indiranagar, Bangalore, India Tel: +91-80-67208700, Fax: +91-80-67208777 Renesas Electronics Korea Co., Ltd. 12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2016 Renesas Electronics Corporation. All rights reserved. Colophon 5.0