www.hubbell-wiring.comG-26 Wiring Device-Kellems
®
Rating Devices Cord Diameter
Amps
Poles
and
Wires
Conguration
Recep./ Plug/
Conn. Inlet AC Voltage
Plug
Receptacle
Min. Max.
Inches (mm)
20 3P 4W 3Ø 250V L420P9 L420R9 .350" - .710"
(8.3 - 15.9)
30 3P 4W
125/250V
L430P12 L430R12 .390" - .775"
(9.9 - 19.7)
30 3P 4W 3Ø 250V L430P9 L430R9 .390" - .775"
(9.9 - 19.7)
Amps
Poles
and
Wires
Conguration
Recep./ Plug/
Conn. Inlet AC Voltage
Plug
Receptacle
Min. Max.
Inches (mm)
60 3P 4W 3Ø 250V A460P9 A460R9 .75" - 1.25"
(19.1 - 31.8)
Amps
Poles
and
Wires
Conguration
Recep./ Plug/
Conn. Inlet AC Voltage
Plug
Receptacle
Min. Max.
Inches (mm)
60 4P 5W 3ØY 120/208V A560P9 HBL560R9W .89" - 1.42"
(22.6 - 36.1)
100 4P 5W 3ØY 120/208V A5100P9 HBL5100R9W 1.34" - 1.50"
(34.0 - 38.1)
Specifications
Electrical
Dielectric Withstand Voltage 3000V AC.
Max. Working Voltage 250V RMS.
Current Interrupting Certified for current interruption at full rated current.
Temperature Rise Max. 30 C temperature rise at full rated current
after 50 cycles of overload at 150% of rated
current at a power factor of 75%.
Endurance Up to 5,000 connect and disconnect cycles at
full rated current and voltage.
Mechanical
Impact Resistance Per CSA C22.2 No. 182.1 / UL1682.
Cord Grip Cable Retention Per CSA C22.2 No. 182.1 / UL1682.
Cord Accommodation Round portable service cords of diameters
commensurate with the device rating as defined
in UL standard 62, CSA C22.2 No. 49 and the
<HAR> European Standards.
Terminal Identification Terminals identified in accordance with North
American convention.
Product Identification Ratings are a permanent part of the device housing.
Environmental
Flammability HB or better per UL 94 or CSA.
C22.2 No. 0.17.
Ingress Protection IP22 Suitability
Operating Temperatures Maximum Continuous 75° C;
Minimum -40°C
without
impact.
Pin and Sleeve
Low Profile Devices and Specifications
20, 30 and 60 Ampere - North American Ratings
Low Profile Devices
Application Guide
Agriculture Indoor location and maintenance.
Chemical Processing Indoor location and maintenance.
Construction Indoors for added safety and abuse
resistance.
Entertainment Indoor location and maintenance.
Food Service Food service areas where aesthetics
and space are concerns.
Light Manufacturing Indoor locations and maintenance.
Manufacturing Light assembly areas, stamping
operations and maintenance areas.
Military Warehouse and maintenance areas.
Materials
Plug Material
Case Zytel® 101 Nylon
Shroud Zytel® 101 Nylon
Pin Carrier 20 & 30A Zytel® 101 Nylon
Pin and Carrier 60A High-Impact Thermoset
Pins Brass CDA#360
Assembly Screws Stainless Steel (300 series)
Terminal Screws Stainless Steel (300 series)
Receptacle
Body Zytel® 101 Nylon
Sleeve Carrier 20 & 30A Zytel® 101 Nylon
Sleeve Carrier 60A High-Impact Thermoset
Sleeves Brass CDA #360
Assembly Screws Stainless Steel (300 series)
Terminal Screws Stainless Steel (300 series)
Adapter Plate 20 & 30A Galvanized Steel
Adapter Plate 60A Aluminum
Wall Trim Plate Zytel® 101 Nylon
Panel Mount Trim Plate Stainless Steel (300 series)
Note: See page G-27 for product dimensions.
® Zytel and Rynite are registered trademarks of E.I. DuPont Corp.
RoHS