PC1601LRU-AWB-B-Q - POWERTIP

TECH. CORP.

SPECIFICATIONS

CUSTOMER :PTC

SAMPLE CODE (Ver.) :

PC1601LRU-AWB-B-Q(Ver.0)

MASS PRODUCTION CODE (Ver.)

DRAWING NO. (Ver.) : PC95017

Customer A

pp

roved

Date:

Approved QC Confirmed Designer

■ Approval For Specifications Only.

* This specification is subject to change without notice.

Please contact Powertip or it’s representative before designing your product based on this specificatio n.

□ Approval For Specifications and Sample.

POWERTIP TECH. CORP.

Headquarters: No.8, 6th Road, Taichung Industrial Park,

Taichung, Taiwan

台中市 407 工業區六路 8號

TEL: 886-4-2355-8168

FAX: 886-4-2355-8166

E-mail: sales@powertip.com.tw

Http://www.powertip.com.tw

NO.PT-A-005-6

PC1601LRU-AWB-B-Q Rev.0(HK) Page2

RECORDS OF REVISION

Date Rev. Description Note Page

2006/01/16 0 PC1601LRU-AWB-B-Q is the ROHS compliant part number

based on Powertip's standard PC1601LRU-AWB-B

Total：20 Page

PC1601LRU-AWB-B-Q Rev.0(HK) Page3

Contents

1. SPECIFICATIONS

1.1 Features

1.2 Mechanical Specifications

1.3 Absolute Maximum Ratings

1.4 DC Electrical Characteristics

1.5 Optical Characteristics

1.6 Backlight Characteristics

2. MODULE STRUCTURE

2.1 Counter Drawing

2.2 Interface Pin Description

2.3 Timing Characteristics

2.4 Display Command

2.5 Character Pattern

3. QUALITY ASSURANCE SYSTEM

3.1 Quality Assurance Flow Chart

3.2 Inspection Specification

4. RELIABILITY TEST

4.1 Reliability Test Condition

5. PRECAUTION RELATING PRODUCT HANDLING

5.1 Safety

5.2 Handling

5.3 Storage

5.4 Terms of Warranty

6. THIS PRODUCT CONFORMS THE ROHS OF PTC.

Note：For detailed information please refer to IC data sheet：ST7066U

PC1601LRU-AWB-B-Q Rev.0(HK) Page4

1. SPECIFICATIONS

1.1 Features

Item Standard Value

Display Type 16*1 Characters

LCD Type STN YG Positive Transflective Normal Temp.

Driver Condition LCD Module：1/16 Duty，1/4 Bias

Viewing Direction 6 O’clock

Backlight YG LED B/L

Weight 36 g

Interface －

Other －

1.2 Mechanical Specifications

Item Standard Value Unit

Outline Dimension 80.0(L)* 36.0(W)*14.5(H) (max) mm

Viewing Area 64.5(L)*13.8(W) mm

Active Area 59.62 (L)*6.56(W) mm

Dot Size 0.55 (L)*0.75(W) mm

Dot Pitch 0.63(L)*0.83(W) mm

Note：For detailed information please refer to LCM drawing

1.3 Absolute Maximum Ratings

Item Symbol Condition Min. Max. Unit

Power Supply Voltage VDD － -0.3 7.0

V

LCD Driver Supply Voltage VLCD － VDD-10.0 VDD+0.3 V

Input Voltage VIN － -0.3 VDD+0.3 V

Operating Temperature TOP Excluded B/L 0 50

℃

Storage Temperature TST Excluded B/L -20 70

℃

Storage Humidity HD Ta＜40 ℃ - 90

%RH

PC1601LRU-AWB-B-Q Rev.0(HK) Page5

1.4 DC Electrical Characteristics

VDD = 5.0 V ± 0.5V，VSS = 0V，Ta = 25℃

Item Symbol Condition Min. Typ. Max. Unit

Logic Supply Voltage VDD － 4.5 5.0 5.5

V

“H” Input Voltage VIH － 0.7 VDD - VDD V

“L” Input Voltage VIL － -0.3 - 0.6

V

“H” Output Voltage VOH IOH=-0.1mA 3.9 - VDD V

“L” Output Voltage VOL IOL=0.1mA - - 0.4

V

Supply Current IDD V

DD = 5.0 V - 1.5 3.0

mA

0℃ - - -

25℃*1 4.3 4.5 4.7

LCM Driver Voltage VOP

50℃ - - -

V

1.5 Optical Characteristics

LCD Panel：1/16 Duty，1/4 Bias，VLCD =4.6 V，Ta = 25℃

Item Symbol Conditions Min. Typ. Max. Reference

View Angle θ C>2.0, ∅ = 0° 40° - -

Notes 1 & 2

Contrast Ratio C θ = 5°, ∅ = 0° 7 9 - Note 3

Response Time(rise) tr θ = 5°, ∅ = 0° - 200ms 300 ms

Note 4

Response Time(fall) tf θ = 5°, ∅ = 0° - 150 ms 225 ms Note 4

PC1601LRU-AWB-B-Q Rev.0(HK) Page6

Light (when reflected) z (θ=0°)

Note 1: Definition of angles θ and ∅ Note 2: Definition of viewing angles θ1 and θ2

θ1 θ2

viewing angle θ (∅ fixed)

Note : Optimum viewing angle with the

naked eye and viewing angle θ at

Cmax. Above are not always the same

Note 3: Definition of contrast C Note 4: Definition of response time

Brightness (reflection) of unselected dot (B2)

C = ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯

Brightness (reflection) of selected dot (B1)

Contrast

Non-selected state

VLCD

-VLCD

0

tf

90%

t

r

10%

Selected state Non-selected state

Time

0 Note: Measured with a transmissive LCD

operating voltage (v) panel which is displayed 1 cm2

VLCD : Operating voltage fFRM : Frame frequency

t

r : Response time (rise) tf : Response time (fall)

(%)

Brightness

(reflection)

Brightness (reflection) of

selected dot

Brightness

(reflection) of

unselected dot

Cmax.

Contrast

C 2.0

Sensor

LCD panel

X(∅=90°)

Light (when transmitted )

X’

Z’

Y(∅=0°)

(θ=90°)

∅

Y’(∅=180°)

θ

B2

B1

PC1601LRU-AWB-B-Q Rev.0(HK) Page7

1.6 Backlight Characteristics

LCD Module with LED Backlight

Maximum Ratings

Item Symbol Conditions Min. Max. Unit

Forward Current IF Ta =25℃ - 240

mA

Reverse Voltage VR Ta =25℃ - 5

V

Power Dissipation PO Ta =25℃ - 1.1

mW

Operating Temperature TOP - -20 70

℃

Storage Temperature TST - -30 80

℃

Solder Temp. for 3 Second - - - 260 ℃

Electrical / Optical Characteristics

Ta =25℃

Item Symbol Conditions Min. Typ. Max. Unit

Forward Voltage VF IF=120 mA 4.0 4.2 4.4 V

Reverse Current IR VR=5V - - 0.2 mA

Wavelength λp IF=120 mA 569 - 575

nm

Luminous Intensity

(without LCD) IV IF=120 mA 150 200 - cd/m2

Color Yellow-green

PC1601LRU-AWB-B-Q Rev.0(HK) Page8

2. MODULE STRUCTURE

2.1 Counter Drawing

PC1601LRU-AWB-B-Q Rev.0(HK) Page9

2.2 Interface Pin Description

Pin No. Symbol Signal Description

1 VSS Power Supply (Vss=0)

2 VDD Power Supply (VDD>VSS)

3 VO Operating voltage for LCD

4 RS

Register Selection input

High = Data register

Low = Instruction register (for write)

Busy flag address counter (for read)

5

R/W

Read/Write signal input is used to select the read/write

mode

High = Read mode, Low = Write mode

6 E Start enable signal to read or write the data

7~10 DB0 ~ DB3

Four low order bi-directional three-state data bus lines. Use

for data transfer between the MPU and the LCD module.

These four are not used during 4-bit operation.

11~14 DB4~DB7

Four high order bi-directional three-state data bus lines.

Used for data transfer between the MPU and the LCD

module.

DB7 can be used as a busy flag.

15 A Power supply LED backlight(+)

16 K Power supply LED backlight (-)

Contrast Adjust

LCD MODULE

VDD

2

3

1

10~20KΩ

VO

VSS

4.2V

15 16

PC1601LRU-AWB-B-Q Rev.0(HK) Page10

2.3 Timing Characteristics

• Writing data from MPU to ST7066U

VIH1

VIL1

TAS

TAH

TPW

TH

Valid data

TC

DB0-DB7

E

R/W

RS

TDSW

TR

● Reading data from ST7066U to MPU

RS

R/W

E

DB0-DB7

TC

TDDR

Valid data

TH

TPW

TAH

TR

TAS

VIL1

VIH1

PC1601LRU-AWB-B-Q Rev.0(HK) Page11

• Write Mode (Writing data from MPU to ST7066U)

(Vcc = +5V,Ta=25°C)

Symbol Characteristics Test Condition Min. Typ. Max. Unit

TC Enable Cycle Time Pin E 1200 - - ns

TPW Enable Pulse Width Pin E 140 - - ns

TR , TF Enable Rise / Fall Time Pin E - - 25 ns

TAS Address Setup Time Pins: RS , RW,E 0 - - ns

TAH Address Hold Time Pins :RS,RW,E 10 - - ns

TDSW Data Setup Time Pins:DB0~DB7 40 - - ns

TH Data Hold Time Pins:DB0~DB7 10 - - ns

• Read Mode (Reading data from ST7066U to MPU)

(Vcc = +5V,Ta=25°C)

Symbol Characteristics Test Condition Min. Typ. Max. Unit

TC Enable Cycle Time Pin E 1200 - - ns

TPW Enable Pulse Width Pin E 140 - - ns

TR , TF Enable Rise / Fall Time Pin E - - 25 ns

TAS Address Setup Time Pins: RS , RW,E 0 - - ns

TAH Address Hold Time Pins :RS,RW,E 10 - - ns

TDDR Data Setup Time Pins:DB0~DB7 - - 100 ns

TH Data Hold Time Pins:DB0~DB7 10 - - ns

PC1601LRU-AWB-B-Q Rev.0(HK) Page12

2.4 Display Command

Instruction Code

Instructions

RS R/W DB

7

DB

6

DB

5

DB

4

DB

3

DB

2

DB

1

DB

0

Description

Time

(270KHz)

Clear

Display 0 0 0 0 0 0 0 0 0 1

Write "20H" to DDRAM. and set

DDRAM address to "00H" from

AC.

1.52ms

Return

Home 0 0 0 0 0 0 0 0 1 ×

Set DDRAM address to "00H"

from AC and return cursor to it's

original position if shifted.

The contents of DDRAM are not

changed.

1.52ms

Entry Mode

Set 0 0 0 0 0 0 0 1 I/D S

Sets cursor move direction and

specifies display shift. These

operations are performed during

data write and read .

37µs

Display

ON/OFF

0 0 0 0 0 0 1 D C B

D=1 : entire display on

C=1 : cursor on

B=1 : cursor position on

37µs

Cursor or

Display

Shift

0 0 0 0 0 1 S/C

R/L

× ×

Set cursor moving and display

shift control bit, and the direction,

without changing of DDRAM

data.

37µs

Function

Set 0 0 0 0 1 DL N F × ×

DL: interface data is 8/4 bits

NL: number of line is 2/1

F: font size is 5×11/5×8

37µs

Set

CGRAM

Address

0 0 0 1 AC

5

AC

4

AC

3

AC

2

AC

1

AC

0

Set CGRAM address in address

counter. 37µs

Set

DDRAM

Address

0 0 1 AC

6

AC

5

AC

4

AC

3

AC

2

AC

1

AC

0

Set DDRAM address in address

counter. 37µs

PC1601LRU-AWB-B-Q Rev.0(HK) Page13

Read Busy

Flag and

Address

0 1 BF

AC

6

AC

5

AC

4

AC

3

AC

2

AC

1

AC

0

Whether during internal operation

or not can be known by reading

BF. The contents of address

counter can also be read.

0µs

Write Data

to RAM 1 0 D7 D6 D5 D4 D3 D2 D1 D0 Write data into internal RAM

(DDRAM/CGRAM). 37µs

Read Data

from RAM 1 1 D7 D6 D5 D4 D3 D2 D1 D0 Read data from internal RAM

(DDRAM/CGRAM). 37µs

Note:

Be sure the ST7066U is not in the busy state (BF=0) before sending an instruction from the MPU to the

ST7066.

If an instruction is sent without checking the busy flag , the time between the first instruction and next

instruction will take much longer than the instruction time itself.

Refer to Instruction Table for the list of each instruction execution time .

PC1601LRU-AWB-B-Q Rev.0(HK) Page14

2.5 Character Pattern

PC1601LRU-AWB-B-Q Rev.0(HK) Page15

3. QUALITY ASSURANCE SYSTEM

3.1 Quality Assurance Flow Chart

Item Customer Sales R&D Q.A

Manufactur

ing

Product

control Purchase Inventory

control

Marketing

&

Design

Sample

Approval

Pilot

Run

&

Mass

Product

Ship

Out

OK

Request

Info Survey

Inquiry Project evaluation

Project Validatio

n

Quote OK

NG

Contract

Design chec

k

Sample test

Verificatio

n

Sam

p

le a

pp

roval

NG

Pilot run & Reliabilit

y

test

Verificatio

n

S

p

ecification

p

re

p

aration

OK

Mass

p

roduction

Ins

p

ection NG

OK

Shi

p

ment

NG

Shi

p

out

OK

PC1601LRU-AWB-B-Q Rev.0(HK) Page16

Item Customer Sales R&D Q.A

Manufactu

ring

Product

control Purchase Inventory

control

Sales

Service

Q.A

Activity

1. ISO 9001 Maintenance Activities 2. Process improvement proposal

3. Equipment calibration 4. Education And Training Activities

5. Standardization Management

Info Clai

m

Failure anal

y

sis

Corrective action

Trackin

g

Anal

y

sis re

p

ort

PC1601LRU-AWB-B-Q Rev.0(HK) Page17

3.2 Inspection Specification

Inspection Standard：MIL-STD-105E Table Normal Inspection Single Sampling Level Ⅱ。

Equipment：Gauge、MIL-STD、Powertip Tester、Sample。

IQC Defect Level：Major Defect AQL 0.4; Minor Defect AQL 1.5。

FQC Defect Level：100% Inspection。

OUT Going Defect Level：Sampling。

Specification：

NO Item Specification Judge Level

1 Part Number

The part number is inconsistent with work order o

f

production N.G. Major

2 Quantity

The quantity is inconsistent with work order of

production N.G. Major

The display lacks of some patterns. N.G. Major

Missing line. N.G. Major

The size of missing dot, A is＞1/2 Dot size N.G. Major

There is no function. N.G. Major

3

Electronic

characteristics of

LCM

A=( L + W )÷2 Output data is error N.G. Major

Material is different with work order of production N.G. Major

LCD is assembled in inverse direction N.G. Major

Bezel is assembled in inverse direction N.G. Major

Shadow is within LCD viewing area + 0.5 mm N.G. Major

The diameter of dirty particle, A is＞0.4 mm N.G. Minor

Dirty particle length is ＞3.0mm, and 0.01mm＜width

≦0.05mm N.G. Minor

Display is without protective film N.G. Minor

Conductive rubber is over bezel 1mm N.G. Minor

Polarizer exceeds over viewing area of LCD N.G. Minor

Area of bubble in polarizer, A＞1.0mm, the number of

bubble is ＞1 piece. N.G. Minor

4

Appearance of

LCD

A=( L + W )÷2

Dirty particle

(Including

scratch、bubble )

0.4mm＜Area of bubble in polarizer, A＜1.0mm, the

number of bubble is ＞4 pieces. N.G. Minor

Burned area or wrong part number is on PCB N.G. Major

The symbol, character, and mark of PCB are

unidentifiable. N.G Minor

The stripped solder mask , A is＞1.0mm N.G. Minor

0.3mm＜stripped solder mask or visible circuit, A ＜

1.0mm, and the number is ≧4 pieces N.G. Minor

There is particle between the circuits in solder mask N.G Minor

The circuit is peeled off or cracked N.G Minor

There is any circuits risen or exposed. N.G Minor

0.2mm＜Area of solder ball, A is ≦0.4mm

The number of solder ball is ≧3 pieces N.G Minor

5

Appearance of

PCB

A=( L + W )÷2

The magnitude of solder ball, A is ＞0.4mm. N.G Minor

PC1601LRU-AWB-B-Q Rev.0(HK) Page18

NO Item Specification Judge Level

The shape of modeling is deformed by touching. N.G. Major

Insufficient epoxy: Circuit or pad of IC is visible N.G. Minor

Excessive epoxy: Diameter of modeling is ＞20mm

or height is ＞2.5mm N.G. Minor

6

Appearance of

molding

A=( L + W )÷2

The diameter of pinhole in modeling, A is ＞0.2mm. N.G. Minor

The folding angle of frame must be ＞45∘+10∘ N.G. Minor

The area of stripped electroplate in top-view of

frame, A is ＞1.0mm. N.G. Minor

Rust or crack is (Top view only) N.G. Minor

7 Appearance of frame

A=( L + W )÷2

The scratched width of frame is ＞0.06mm.

(Top view only) N.G. Minor

The color of backlight is nonconforming N.G. Major

Backlight can’t work normally. N.G. Major

The LED lamp can’t work normally N.G. Major

The unsoldering area of pin for backlight,

A is ＞1/2 solder joint area. N.G. Minor

8

Electrical

characteristic of

backlight

A=( L + W )÷2 The height of solder pin for backlight is ＞2.0mm N.G. Minor

The mark or polarity of component is unidentifiable. N.G. Minor

The height between bottom of component and

surface of the PCB is floating ＞0.7mm N.G. Minor

D＞1/4W

W D

D’ Pad

N.G. Minor

End solder joint width, D’ is ＞50% width of

component termination or width of pad N.G. Minor

Side overhang, D is ＞25% width of component

termination. N.G. Minor

Component is cracked, deformed, and burned, etc. N.G. Minor

The polarity of component is placed in inverse

direction. N.G. Minor

10 Assembly parts

A=( L + W )÷2

Maximum fillet height of solder extends onto the

component body or minimum fillet height

is ＜0.5mm.

N.G. Minor

PC1601LRU-AWB-B-Q Rev.0(HK) Page19

4. RELIABILITY TEST

4.1 Reliability Test Condition

NO Item Test Condition

1 High Temperature

Storage

Storage at 70 ±2℃ 96~100 hrs

Surrounding temperature, then storage at normal condition

4hrs

2 Low Temperature

Storage

Storage at -20 ±2℃ 96~100 hrs

Surrounding temperature, then storage at normal condition

4hrs

3 High Temperature

/Humidity Storage

1.Storage 96~100 hrs 60±2℃, 90~95%RH surrounding

temperature, then storage at normal condition 4hrs.

(Excluding the polarizer).

or

2.Storage 96~100 hrs 40±2℃, 90~95%RH surrounding

temperature, then storage at normal condition 4 hrs.

4 Temperature Cycling

-20℃ → 25℃ → 70℃ → 25℃

(30mins) (5mins) (30mins) (5mins)

10 Cycle

5 Vibration 10~55Hz ( 1 minute ) 1.5mm

X,Y and Z direction ﹡(each 2hrs)

Air Discharge:

Apply 6 KV with 5 times

discharge for each polarity +/-

Contact Discharge:

Apply 250V with 5 times

discharge for each polarity +/-

6 ESD Test

Testing location:

Around the face of LCD

Testing location:

1.Apply to bezel.

2.Apply to Vdd, Vss.

Packing Weight (Kg) Drop Height (cm)

0 ~ 45.4 122

45.4 ~ 90.8 76

90.8 ~ 454 61

7 Drop Test

Over 454 46

PC1601LRU-AWB-B-Q Rev.0(HK) Page20

5. PRECAUTION RELATING PRODUCT HANDLING

5.1 SAFETY

5.1.1 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin.

5.1.2 If the liquid crystal touches your skin or clothes , please wash it off immediately by

using soap and water.

5.2 HANDLING

5.2.1 Avoid any strong mechanical shock which can break the glass.

5.2.2 Avoid static electricity which can damage the CMOS LSI—When working with the

module , be sure to ground your body and any electrical equipment you may be using.

5.2.3 Do not remove the panel or frame from the module.

5.2.4 The polarizing plate of the display is very fragile. So , please handle it very

carefully ,do not touch , push or rub the exposed polarizing with anything harder

than an HB pencil lead (glass , tweezers , etc.)

5.2.5 Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the

surface of plate.

5.2.6 Do not touch the display area with bare hands , this will stain the display area.

5.2.7 Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with

a cleaning naphtha solvent.

5.2.8 To control temperature and time of soldering is 320±10℃and 3-5 sec.

5.2.9 To avoid liquid (include organic solvent) stained on LCM .

5.3 STORAGE

5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃

and the humidity is below 65% RH.

5.3.2 Do not place the module near organics solvents or corrosive gases.

5.3.3 Do not crush , shake , or jolt the module.

5.4 TERMS OF WARRANTY

5.4.1 Applicable warrant period

The period is within thirteen months since the date of shipping out under normal

using and storage conditions.

5.4.2 Unaccepted responsibility

This product has been manufactured to your company’s specification as a part for

use in your company’s general electronic products. It is guaranteed to perform

according to delivery specifications. For any other use apart from general

electronic equipment , we cannot take responsibility if the product is used in

nuclear power control equipment , aerospace equipment , fire and security

systems or any other applications in which there is a direct risk to human life

and where extremely high levels of reliability are required.