PLAD15KP5.0 thru PLAD15KP400CA, e3 15,000 W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION APPEARANCE WWW . Microsemi .C OM DESCRIPTION These Microsemi 15 kW Transient Voltage Suppressors (TVSs) are designed for applications requiring protection of voltagesensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per IEC61000-4-5 and classes with various source impedances described herein. This series is available in 5.0 to 400 volt standoff voltages (VWM) in both unidirectional and bidirectional offered in one surface mount device. Microsemi also offers numerous other TVS products to meet higher and lower power demands and special applications. IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES * * * * * * * * * * APPLICATIONS / BENEFITS Available in both Unidirectional and Bidirectional construction (Bidirectional with C or CA suffix) Low profile surface mount Available in tape-and-reel or waffle pack Selections for 5.0 to 400 volts standoff voltages (VWM) Suppresses transients up to 15,000 watts @ 10/1000 s (see Figure 1) Fast response Optional 100% screening for avionics grade is available by adding MA prefix to part number for added 100% temperature cycle -55oC to +125oC (10X) as well as surge (3X) and 24 hours HTRB with post test VZ & IR (in the operating direction for unidirectional or both directions for bidirectional) Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, and JANTXV are also available by adding MQ, MX, or MV prefixes respectively to part numbers. Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS compliant devices available by adding "e3" suffix MAXIMUM RATINGS MECHANICAL AND PACKAGING * CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 * TERMINALS: Tin-Lead or RoHS Compliant annealed matte-Tin plating readily solderable per MIL-STD-750, method 2026 * MARKING: Body marked with part number * POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom) * WEIGHT: 1 gram (approximate) * TAPE & Reel: Standard per EIA-481-B (add "TR" suffix to part number) * See package dimensions on last page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 PLAD15KP5.0- 400CA, e3 * Operating and Storage temperature: -55 C to +150 C * Peak Pulse Power dissipation at 25C: 15,000 watts at 10/1000 s (also see Figures 1 and 2) * Impulse repetition rate (duty factor): 0.05% * tclamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional * Thermal resistance: 0.2 C/W junction to case or 50C/W junction to ambient when mounted on FR4 PC board with recommended mounting pad (see last page) * Steady-State Power dissipation: 50 watts at TC = 100oC with good heat sink, or 2.5 watts at TA = 25C if mounted on FR4 PC board as described for thermal resistance * Forward Surge Voltage: 3.5 V maximum @ 500 Amps 8.3 ms half-sine wave (unidirectional devices only) * Solder temperatures: 260 C for 10 s (maximum) Copyright (c) 2007 10-12-2007 REV G * Protection from switching transients and induced RF * Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 * Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1,2,3,4: PLAD15KP5.0A to 400A or CA Class 5: PLAD15KP5.0A to 400A or CA * Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1,2,3,4: PLAD15KP5.0A to 400A or CA * Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2,3: PLAD15KP5.0A to 400A or CA Class 4: PLAD15KP5.0 to 54A or CA * Pin injection protection per RTCA/DO-160D for Waveform 4 (6.4/69 s): Level 4: PLAD15KP5.0A to 400A or CA Level 5: PLAD15KP5.0A to 100A or CA * Pin injection protection per RTCA/DO-160D for Waveform 5A (40/120 s): Level 4: PLAD15KP5.0A to 28A or CA PLAD15KP5.0 thru PLAD15KP400CA, e3 15,000 W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION MICROSEMI PART NUMBER (Note 2) REVERSE STAND-OFF VOLTAGE VWM (Note 1) VOLTS Copyright (c) 2007 10-12-2007 REV G 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 43 43 45 45 48 48 51 51 V(BR) VOLTS @ 6.40 - 7.30 6.40 - 7.00 6.67 - 8.15 6.67 - 7.37 7.22 - 8.82 7.22 - 7.98 7.78 - 9.51 7.78 - 8.60 8.33 - 10.2 8.33 - 9.21 8.89 - 10.9 8.89 - 9.83 9.44 - 11.5 9.44 - 10.4 10.0 - 12.2 10.0 - 11.1 11.1 - 13.6 11.1 - 12.3 12.2 - 14.9 12.2 - 13.5 13.3 - 16.3 13.3 - 14.7 14.4 - 17.6 14.4 - 15.9 15.6 - 19.1 15.6 - 17.2 16.7 - 20.4 16.7 - 18.5 17.8 - 21.8 17.8 - 19.7 18.9 - 23.1 18.9 - 20.9 20.0 - 24.4 20.0 - 22.1 22.2 - 27.1 22.2 - 24.5 24.4 - 29.8 24.4 - 26.9 26.7 - 32.6 26.7 - 29.5 28.9 - 35.3 28.9 - 31.9 31.1 - 38.0 31.1 - 34.4 33.3 - 40.7 33.3 - 36.8 36.7 - 44.9 36.7 - 40.6 40.0 - 48.9 40.0 - 44.2 44.4 - 54.3 44.4 - 49.1 47.8 - 58.4 47.8 - 52.8 50.0 - 61.1 50.0 - 55.3 53.3 - 65.1 53.3 - 58.9 56.7 - 69.3 56.7 - 62.7 MAXIMUM STANDBY CURRENT ID @ VWM MAXIMUM PEAK PULSE CURRENT IPP (FIG. 3) MAXIMUM TEMPERATURE COEFFICIENT OF V(BR) V(BR) I(BR) mA VOLTS 150 150 150 150 150 150 150 150 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.1 45.5 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 A A mV/ C 15000 15000 15000 15000 6000 6000 3000 3000 750 750 450 450 150 150 120 60 45 45 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1620 1629 1317 1455 1221 1341 1134 1251 1350 1164 999 1101 942 1041 885 975 798 882 747 822 681 753 630 696 582 645 564 318 528 576 492 543 465 516 417 462 381 423 348 384 321 357 297 330 279 309 255 282 234 258 210 234 195 216 186 207 174 195 165 183 4.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 6.0 6.0 6.0 6.0 7.0 7.0 8.0 8.0 9.0 9.0 10 10 11 11 12 12 13 13 15 15 18 16 19 18 20 19 24 22 27 24 30 27 33 29 34 30 38 35 41 38 45 40 50 45 54 49 57 51 62 55 65 60 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 PLAD15KP5.0- 400CA, e3 PLAD15KP5.0 PLAD15KP5.0A PLAD15KP6.0 PLAD15KP6.0A PLAD15KP6.5 PLAD15KP6.5A PLAD15KP7.0 PLAD15KP7.0A PLAD15KP7.5 PLAD15KP7.5A PLAD15KP8.0 PLAD15KP8.0A PLAD15KP8.5 PLAD15KP8.5A PLAD15KP9.0 PLAD15KP9.0A PLAD15KP10 PLAD15KP10A PLAD15KP11 PLAD15KP11A PLAD15KP12 PLAD15KP12A PLAD15KP13 PLAD15KP13A PLAD15KP14 PLAD15KP14A PLAD15KP15 PLAD15KP15A PLAD15KP16 PLAD15KP16A PLAD15KP17 PLAD15KP17A PLAD15KP18 PLAD15KP18A PLAD15KP20 PLAD15KP20A PLAD15KP22 PLAD15KP22A PLAD15KP24 PLAD15KP24A PLAD15KP26 PLAD15KP26A PLAD15KP28 PLAD15KP28A PLAD15KP30 PLAD15KP30A PLAD15KP33 PLAD15KP33A PLAD15KP36 PLAD15KP36A PLAD15KP40 PLAD15KP40A PLAD15KP43 PLAD15KP43A PLAD15KP45 PLAD15KP45A PLAD15KP48 PLAD15KP48A PLAD15KP51 PLAD15KP51A MAXIMUM CLAMPING VOLTAGE VC @ IPP BREAKDOWN VOLTAGE V(BR) WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS Page 2 PLAD15KP5.0 thru PLAD15KP400CA, e3 15,000 W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION MICROSEMI PART NUMBER (Note 2) VOLTS 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 180 180 200 200 220 220 250 260 280 300 350 400 BREAKDOWN VOLTAGE V(BR) V(BR) VOLTS @ 60.0 - 73.3 60.0 - 66.3 64.4 - 78.7 64.4 - 71.2 66.7 - 81.5 66.7 - 73.7 71.1 - 86.9 71.1 - 78.6 77.8 - 95.1 77.8 - 86.0 83.3 - 102.0 83.3 - 92.1 86.7 - 106.0 86.7 - 95.8 94.4 - 115.0 94.4 - 104.0 100 - 122 100 - 111 111 - 136 111 - 123 122 - 149 122 - 135 133 - 163 133 - 147 144 - 176 144 - 159 167 - 204 167 - 185 178 - 218 178 - 197 189 - 231 189 - 209 200 - 244 200 - 221 222 - 271 222 - 245 245 - 299 245 - 271 278 - 308 289 - 320 311 - 345 333 - 369 389 - 431 444 - 492 I(BR) mA VOLTS 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 96.3 87.1 103.0 93.6 107.0 96.8 114.0 103.0 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 321 291 356 322 293 356 403 419 451 483 564 644 MAXIMUM STANDBY CURRENT ID @ VWM MAXIMUM PEAK PULSE CURRENT IPP (FIG. 3) MAXIMUM TEMPERATURE COEFFICIENT OF V(BR) V(BR) A A mV/ C 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 156 171 147 159 141 156 132 147 120 132 111 123 108 120 99 108 93 102 84 93 78 84 70 78 65 71 56 62 52 58 49 55 47 52 42 47 38 42 37 35.5 33 31 26.5 23 70 64 77 69 79 70 85 75 93 84 100 90 104 94 113 102 120 109 134 122 147 132 161 145 174 157 202 183 216 195 229 207 242 219 269 243 297 269 306 318 344 368 430 490 NOTE 1: Transient Voltage Suppressors are normally selected with reverse "Stand Off Voltage" VWM which should be equal to or greater than the dc or continuous peak operating voltage level. NOTE 2: For bidirectional construction, indicate a C or CA suffix after the part number. Symbol VWM PPP V(BR) ID Copyright (c) 2007 10-12-2007 REV G Definition SYMBOLS & DEFINITIONS Symbol Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current IPP VC I(BR) Definition Peak Pulse Current Clamping Voltage Breakdown Current for V(BR) Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 PLAD15KP5.0- 400CA, e3 PLAD15KP54 PLAD15KP54A PLAD15KP58 PLAD15KP58A PLAD15KP60 PLAD15KP60A PLAD15KP64 PLAD15KP64A PLAD15KP70 PLAD15KP70A PLAD15KP75 PLAD15KP75A PLAD15KP78 PLAD15KP78A PLAD15KP85 PLAD15KP85A PLAD15KP90 PLAD15KP90A PLAD15KP100 PLAD15KP100A PLAD15KP110 PLAD15KP110A PLAD15KP120 PLAD15KP120A PLAD15KP130 PLAD15KP130A PLAD15KP150 PLAD15KP150A PLAD15KP160 PLAD15KP160A PLAD15KP170 PLAD15KP170A PLAD15KP180 PLAD15KP180A PLAD15KP200 PLAD15KP200A PLAD15KP220 PLAD15KP220A PLAD15KP250 PLAD15KP260A PLAD15KP280A PLAD15KP300A PLAD15KP350A PLAD15KP400A MAXIMUM CLAMPING VOLTAGE VC @ IPP WWW . Microsemi .C OM REVERSE STANDOFF VOLTAGE VWM (Note 1) PLAD15KP5.0 thru PLAD15KP400CA, e3 15,000 W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION PPP Peak Pulse Power - kW WWW . Microsemi .C OM GRAPHS tp - Pulse Time - sec FIGURE 1 Peak Pulse Power (PPP) or continuous Power in Percent of o 25 C Rating Peak Pulse Power vs. Pulse Time to 50% of Exponentially Decaying Pulse Test waveform parameters: tr=10 s, tp=1000 s FIGURE 2 FIGURE 3 Pulse Waveform Copyright (c) 2007 10-12-2007 REV G PLAD15KP5.0- 400CA, e3 TL Lead Temperature oC Derating Curve Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4 PLAD15KP5.0 thru PLAD15KP400CA, e3 15,000 W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION WWW . Microsemi .C OM PACKAGE AND MOUNTING PAD DIMENSIONS Inches [mm] PLAD15KP5.0- 400CA, e3 Copyright (c) 2007 10-12-2007 REV G Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 5