XW1147B - Stanley Electric Co., Ltd.

Features

Recommended Applications

Cellular Phone, Mobile Equipment, Amusement Equipment, Other General Applications

Page 1

Outer Dimension 3.5 x 2.8 x 1.9mm( L x W x H )

Temperature range

Storage Temperature

Operating Temperature

Spatial distribution characteristics. ( : 120deg)

No lead package and lead–free soldering compatible

RoHS compliant

Package

Product features

Chromaticity coordinates

Spatial distribution

Die materials

Optical efficiency

Rank grouping parameter

Assembly method

Soldering methods

Taping and reel

ESD

Sorted by luminous intensity and chromaticity per rank taping

Auto pick & place machine (Auto Mounter)

2,000pcs per reel in a 8mm width tape. (Standard)

Reel diameter: 180mm

1kV (HBM)

120 deg.

: -40 100

: -30 85

PLCC-4 Type, Diffused pale yellow resin

XW1147B

x = 0.31TYP., y = 0.32TYP.

(Condition : IF=20mA)

InGaN

19 lm/W

Reflow soldering, TTW (Through The Wave) soldering and manual soldering

PLCC-4 Type White LED

2005.3.31

Color and Luminous Intensity

Page 2

MIN. TYP. I

TYP. I

XW1147B InGaN White Pale

Yellow 400 500 20 1.4 20

Part No. Material Emitted

Color

Luminous Flux

Iv (mcd) (lm)

Lens

Color

Luminous Intensity

XW1147B

PLCC-4 Type White LED

Note : The above luminous intensity(Iv) is the setup values of the sorting machine.

(Tolerance : IV… 10%)

2004.07.1

Page 3

Absolute Maximum Ratings

Thermal Characteristics

Power Dissipation P

Forward Current I

Pulse Forward

Current

FRM

mA/

Reverse Voltage V

Operating

Tem

erature T

opr

-30 +85

Storage Temperature T

stg

-40 +100

Absolute Maximum Ratings

Item Symbol Unit

Derating

(Ta=67.5 or higher) 1.67

120

100

0.50

Junction Temperature

(MAX.) Tj

Thermal Resistance

(TYP.)

(Junction/ Solder Point)

R(th J-S) /W

Unit

Characteristics

TYP.

110

220

Item Symbol

XW1147B

PLCC-4 Type White LED

1 IFRMMeasurement condition : Pulse Width 1ms., Duty 1/20.

Rth(J-S) Measurement Condition / Substrate: FR4(t=1.6mm) Pattern Size: 16mm2.

2004.07.1

Electro-Optical Characteristics

Condition

TYP. 3.7

MAX. 4

Reverse Current V

=5V I

MAX. 50

Half Intensity Angle I

=20mA TYP. 120 deg.

xTYP.0.31-

yTYP.0.32-

Chromaticity

Coordinates I

=20mA

Forward Voltage I

=20mA

CharacteristicsItem Symbol Unit

Page 4

XW1147B

PLCC-4 Type White LED

2004.07.1

Luminous Intensity Rank

Page 5

Rank I

（mcd）

MIN. MAX.

C400475

D475565

E565672

=20mA

Condition

Intensity Tolerance each Rank : +/-10%

XW1147B

PLCC-4 Type White LED

Please contact our sales staff concerning rank designation.

2004.07.1

Sorting Chart for Chromaticity Coordinates

Page 6

Chromaticity Coordinates Tolerance Each Rank : +/-0.02

Rank xyxyxyxy

1 0.280 0.248 0.264 0.267 0.283 0.305 0.296 0.276

2c 0.287 0.295 0.283 0.305 0.304 0.330 0.307 0.315

2d 0.296 0.276 0.287 0.295 0.307 0.315 0.311 0.294

2e 0.307 0.315 0.304 0.330 0.330 0.360 0.330 0.339

2f 0.311 0.294 0.307 0.315 0.330 0.339 0.330 0.318

3 0.330 0.318 0.330 0.360 0.361 0.385 0.356 0.351

LEFT DOWN point LEFT UP point RIGHT UP point RIGHT UP point

XW1147B

PLCC-4 Type White LED

Please contact our sales staff concerning rank designation.

2004.07.1

0.0

0.2

0.4

0.6

0.8

1.0

1.2

400 450 500 550 600

スペクトル分布特性

Relative Intensity vs. Wavelength

条件/Condition : IF=10mA Ta=25℃

相対放射強度 / Relative Intensity

波長 / Wavelength[nm]

相対光度 / Relative Intensity

VUB VUG

Spatial Distribution Example

Relative Intensity vs. Wa ve Length

　　　　　　　　　　　　　Condit ion:IF = 2 0 mA Ta=25

0.2

0.4

0.6

0.8

1.2

350 400 450 500 550 600 650 700 750

Wave Length[nm]

Relative Intensity

F or war d Voltage vs. For war d Cur rent

　　　　　　　　　　　　　　　　　　　Condition:Ta=25

0.01

0.1

100

2.0 2.5 3.0 3.5 4.0 4.5

Forward Voltage VF(V)

Forward Current IF(mA)

Forwa rd Cur rent vs. Relative Intensity

Condition:Ta=25

0.0

0.5

1.0

1.5

0 5 10 15 20 25 30

Forward Current I

(mA)

Relative Intensity

Technical Data

Page 7

XW1147B

PLCC-4 Type White LED

Condition: Ta=25

2004.07.1

F orward Cur r ent vs. Chr omatici ty

Condition:Ta=25

0.30

0.31

0.32

0.33

0.34

0.300 0.305 0.310 0.315 0.320

ｘ

ｙ

5mA

10mA

15mA

25mA

20mA

30mA

Page 8

Ambient Te mper a t ure vs. Ma ximum F orwar d Cur rent

100

120

-30 -10 10 30 50 70 90 110

Ambient Temperature : Ta( )

Maximum Forward Current : IF MAX. (mA)

Repeatition Frequency : f 50Hz

Ambient Tem perature vs Relaitive Intensity

Condition:IF=20mA

0.1

1.0

10.0

-40-200 20406080100

Ambient Temperature　Ta( )

Relative Intensity

XW1147B

PLCC-4 Type White LED

Technical Data

Am bient Tem per at ure vs F o rwar d Voltag e

Condition:IF=20mA

3.2

3.4

3.6

3.8

4.2

4.4

-40 -20 0 20 40 60 80 100

Ambient Temperature　Ta( )

Forward Voltage　VF(V)

Duty=5%

Duty=10%

Duty=20%

Duty=50%

2004.07.1

Ambi ent Temperatur e vs C hromatici ty

Condition:IF=20mA

0.30

0.31

0.32

0.33

0.34

0.35

0.29 0.30 0.31 0.32 0.33 0.34

ｘ

ｙ

-30

Page 9

XW1147B

PLCC-4 Type White LED

Technical Data

2004.07.1

Package Dimensions

Recommended Soldering Pattern

Page 10

(Unit: mm)

Taping Specification

(Unit: mm)

・Quantity: 2,000pcs/ reel (standard)

XW1147B

PLCC-4 Type White LED

2004.07.1

Reflow Soldering Conditions

1) The above profile temperature gives the maximum temperature of the LED resin surface.

Please set the temperature so as to avoid exceeding this range.

2) Total times of reflow soldering process shall be no more than 2 times.

When the second reflow soldering process is performed, intervals between the first

and second reflow should be short as possible (while allowing some time for the

component to return to room temperature after the first reflow) in order to prevent the

LED resin from absorbing moisture.

3) Temperature fluctuation to the LED during the pre-heating process shall be minimized.

(6℃maximum)

Pre-heating

Solder Bath Temp.

Dipping Time

120

60 s

1) The dip soldering process shall be 2 times maximum.

2) The product shall be cooled to room temp. before the second dipping process.

Page11

Manual Soldering Conditions

Iron tip temp.

Soldering time and frequency

265

5 s

(MAX.)

3 s

1 time

350

(MAX.)

XW1147B

PLCC-4 Type White LED

TTW (Through The Wave) soldering Conditions

2004.07.1

Reliability Testing Result

Page12

Failure Criteria

Reliabilit y Te st ing

Result Applicable S tandard T esting Condit ions Duration Failure

Room T emp.

O per ating Lif e EIAJ ED-

4701/100(101) Ta = 25 , I

= 30mA 1,000 h 0/20

High T emp.

O per ating Lif e EIAJ ED-

4701/100(101) Ta = 85 ,I

= 20mA 1,000 h 0/20

Low T emp.

O per ating Lif e EIAJ ED-

4701/100(101) Ta = -30 , I

= 30mA 1,000 h 0/20

W et High Temp.

O per ating Lif e EIAJ ED-

4701/100(102) Ta = 60 , 90%, I

= 30mA 1,000 h 0/20

W et High Temp.

Storage Life EIAJ ED-

4701/100(103) Ta = 60 , 90% 1,000 h 0/20

T her mal S hoc k EIAJ ED-

4701/100(105) Ta = -40 100 (each 15min.) 200 cycles 0/20

High T emp.

Storage Life EIAJ ED-

4701/200(201) Ta = 100 1,000 h 0/20

Low T emp.

Storage Life EIAJ ED-

4701/200(202) Ta = -40 1,000 h 0/20

Cycled Temp.

Humidity Life EIAJ ED-

4701/200(203) Ta = -10 60 , 95%, 24h/cycle 10 cycles 0/20

R esi stan ce to

Ref low S olde r ing EIAJ ED-

4701/300(301)

Preheat : 150 180 (120s Max.)

Soldering Temp. : 260 (5s)

Moisture Soak : 30 , 70%, 72h

2 t imes 0/20

Electric Static

Dischar ge ( E S D) EIAJ ED-

4701/300(304) C = 100pF, R2 = 1.5K , ±1,000V once eac h po lar ity 0/20

Vibration,

Variable Frequ enc y EIAJ ED-

4701/400(403)

98.1m/s

(10G), 100 2KHz, 20min.

XYZ each direction 2 h 0/20

Items Symbols Conditions Failure criteria

Luminous Intensity Iv I

=20mA Testing Min. Value Spec. Min. Value x 0.5

Forward Voltage V

=20mA Testing Max. Value Spec. Max. Value x 1.2

Reverse Current I

=5V Testing Max. Value Spec. Max. Value x 2.5

Cosmetic Appearance - - No notable, decoloration, deformation and cracking

XW1147B

PLCC-4 Type White LED

2004.07.1

Special Notice to Customers Using the Products and

Technical Information Shown in This Data Sheet

Page13

1) The technical information shown in the data sheets are limited to the typical characteristics and circuit

examples of the referenced products. It does not constitute the warranting of industrial property nor the

granting of any license.

2) For the purpose of product improvement, the specifications, characteristics and technical data described in

the data sheets are subject to change without prior notice. Therefore it is recommended that the most

updated specifications be used in your design.

3) When using the products described in the data sheets, please adhere to the maximum ratings for operating

voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any

damage which may occur if these specifications are exceeded.

4) The products described in the data sheets are made to be used in standard electronic applications such as

office automation appliances, communication devices, audio visual, home appliances, and measuring

instruments.

5) If the products in the data sheets are to be used for purposes other than the above which requires high level

reliability and safety where failure and or malfunction of the product may cause death or other serious effects

on the human body such as airplane, space activity, transportation, medical, nuclear), please contact our sales

personnel.

6) In order to export the products or technologies described in this data sheet which are under the “Foreign

Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese

government.

7) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley

Electric Co., Ltd.

8) The most updated edition of this data sheet can be obtained from the address below:

http://www.stanley-components.com

XW1147B

PLCC-4 Type White LED

2004.07.13