TB62706BN/BF TOSHIBA Bi-CMOS INTEGRATED CIRCUIT SILICON MONOLITHIC TB62706BN,TB62706BF 16BIT SHIFT REGISTER, LATCHES & CONSTANT CURRENT DRIVERS The TB62706BN, TB62706BF is specifically designed for LED and LED DISPLAY constant current drivers. This constant current output circuits is able to set up external resistor (IOUT = 5~90 mA). (Note) This IC is monolithic integrated circuit designed to be used together with Bi-CMOS process. The devices consist of 16bit shift register, latch, AND-GATE and Constant Current Drivers. FEATURES Constant Current Output : Can set up all output current with one resister for 5 to 90 mA. TB62706BN TB62706BF Maximum Clock Frequency : fCLK = 15 (MHz) (Cascade Connected Operate, Topr = 25C) 5 V C-MOS Compatible Input Package : SDIP24-P-300-1.78~1.778mmPitch~ (TB62706BN) SSOP24-P-300-1.00B~1.0mmPitch~ (TB62706BF) Constant Output Current Matchong: OUTPUT-GND VOLTAGE CURRENT MATCHING OUTPUT CURRENT 0.4 V 6.0% 5~40 mA 0.7 V 6.0% 5~90 mA Note: Weight SDIP24-P-300-1.78: 1.22 g (typ.) SSOP24-P-300-1.00B: 0.32 g (typ.) (Note) TB62706BF can be used under limited PD (PD 1.04 W, with PCB) 1 2006-06-14 TB62706BN/BF PIN CONNECTION (Top view) BLOCK DIAGRAM TIMING DIAGRAM Note: Latches are level sensitive, not rising edges sensitive and not syncronus CLOCK. Input of LATCH-terminal to H Level, data passes latches, and input to L level, data hold latches. Input of ENABLE-terminal to H level, all output (OUT0~15) do off. 2 2006-06-14 TB62706BN/BF TERMINAL DISCRIPTION PIN No. PIN NAME FUNCTION 1 GND 2 SERIAL-IN 3 CLOCK Input terminal of a clock for data shift to up-edge. 4 LATCH Input terminal of a data strobe. Latches passes data with "H" level input of LATCH -terminal, and hold data with "L" level input. 5~20 OUT0 ~ 15 21 ENABLE 22 SERIAL-OUT 23 R-EXT 24 VDD GND terminal for control logic. Input terminal of a serial-data for shift-register. Output terminals. Input terminal of output enable. All outputs (OUT0~15) do off with "H" level input of ENABLE -terminal, and do on with "L" level input. Output terminal of a serial-data for next SERIAL-IN terminal. Input terminal of connects with a resister for to set up all output current. 5 V Supply voltage terminal. TRUTH TABLE CLOCK LATCH ENABLE SERIAL-IN OUT0 *** OUT7 *** OUT15 SERIAL-OUT UP H L Dn Dn *** Dn-7 *** Dn-15 Dn-15 UP L L Dn+1 No change Dn-14 UP H L Dn+2 Dn+2 *** Dn-5 *** Dn-13 Dn-13 DOWN X L Dn+3 Dn+2 *** Dn-5 *** Dn-13 Dn-13 DOWN X H Dn+3 Off Dn-13 Note: OUT0 ~ 15 = on in case of Dn = H level and OUT0 ~ 15 = off in case of Dn = L level. A resistor is connected with R-EXT and GND accompanied with outside, and it is necessary that a correct power supply voltage is supplied. EQUIVALENT CIRCUIT OF INPUTS AND OUTPUTS 1. ENABLE terminal 2. LATCH terminal 3. CLOCK, SERIAL-IN terminal 4. SERIAL-OUT terminal 3 2006-06-14 TB62706BN/BF ABSOLUTE MAXIMUM RATINGS (Ta = 25C) CHARACTERISTIC SYMBOL RATING UNIT Supply Voltage VDD 0~7.0 V Input Voltage VIN -0.4~VDD + 0.4 V Output Current IOUT 90 mA Output Voltage VOUT -0.5~17.0 V fCK 15 MHz 1440 mA Clock Frequency GND Terminal Current Power Dissipation Tharmal Resistance IGND PD Rth (j-a) 1.78 (BN-type : ON PCB, Ta = 25C ) W 1.00 (BF-type : ON PCB, Ta = 25C ) BN : 70 (BN-type : ON PCB) C / W BF : 120 (BF-type : ON PCB) Operating Temperature Topr -40~85 C Storage Temperature Tstg -55~150 C Note: BN-type :Ambient temperature delated above 25C in the proportion of 14.2 mW / C BF-type : Ambient temperature delated above 25C in the proportion of 8.3 mW / C RECOMMENDED OPERATING CONDITION (Ta = -40~85C unless otherwise noted) CHARACTERISTIC SYMBOL CONDITION MIN TYP. MAX UNIT Supply Voltage VDD 4.5 5.0 5.5 V Output Voltage VOUT 15.0 V OUTn, DC 1 circuit 5 88 Output Current IOH SERIAL-OUT 1.0 IOL SERIAL-OUT -1.0 IO VIH 0.7 VDD VDD +0.3 VIL -0.3 0.3 VDD Input Voltage mA V LATCH Pulse Width t w LAT 100 ns CLOCK Pulse Width tw CLK 50 ns ENABLE Pulse Width t w EN 4500 ns VDD = 4.5~5.5 V Set-Up Time for DATA tsetup (D) 60 ns Hold Time for DATA thold (D) 20 ns Set-Up Time for LATCH tsetup (L) 100 ns Hold Time for LATCH thold (L) Clock Frequency fCLK Power Dissipation PD 60 ns Cascade operation 10.0 MHz Ta = 85C (BN-type) 0.92 Ta = 85C (BF-type) 0.50 4 W 2006-06-14 TB62706BN/BF ELECTRICAL CHARACTERISTICS (VDD = 5.0 V, Ta = 25C unless otherwise noted) SYMBOL TEST CIR- CUIT "H" Level VIH "L" Level VIL CHARACTERISTIC CONDITION MIN TYP. MAX Ta = -40~85C 0.7 VDD VDD Ta = -40~85C GND 0.3 VDD Input Voltage Output Leakage Current UNIT V IOH VOH = 15.0 V 10 VOL IOL = 1.0 mA 0.4 VOH IOH = -1.0 mA 4.6 IOL1 VCE = 0.7 V 34.1 40.0 45.9 IOL2 VCE = 0.4 V 33.7 39.5 45.3 IOL1 IO = 40 mA, VCE = 0.4 V 1.5 6.0 IOL3 VCE = 1.0 V 64.2 75.5 86.8 IOL4 VCE = 0.7 V 63.8 75.0 86.2 IOL2 IO = 75 mA, VCE = 0.7 V 1.5 6.0 % Supply Voltage Regulation % / VDD REXT = 470 , Ta = -40~85C 1.5 5.0 %/V Pull-Up Resistor RIN (up) 150 300 600 RIN (down) 100 200 400 IDD (off) 1 REXT = OPEN, OUT0 ~ 15 = off 0.6 1.2 IDD (off) 2 REXT = 470 , OUT0 ~ 15 = off 3.5 5.8 8.0 IDD (off) 3 REXT = 250 , OUT0 ~ 15 = off 6.5 10.7 15.0 IDD (on) 1 REXT = 470 , OUT0 ~ 15 = on 10.0 16.0 22.0 IDD (on) 2 REXT = 250 , OUT0 ~ 15 = on 18.0 28.3 38.5 Output Voltage SERIAL-OUT Output Current 1 Current Skew Output Current 2 Current Skew Pull-Down Resistor "OFF" Supply Current "ON" 5 REXT = 470 (Include current matching) REXT = 470 REXT = 250 (Include current matching) REXT = 250 A V mA % mA mA 2006-06-14 TB62706BN/BF SWITCHING CHARACTERISTICS (Ta = 25C unless otherwise noted) CHARACTERISTIC SYMBOL TEST CIR- CUIT CONDITION MIN TYP. MAX 1200 1500 1200 1500 1200 1500 CLK-SOUT 15 30 70 CLK- OUTn 700 1000 700 1000 700 1000 15 30 70 CLK- OUTn Propagation Delay Time ("L" to "H") Propagation Delay Time ("H" to "L") LATCH OUTn ENABLE OUTn LATCH OUTn ENABLE OUTn tpLH tpHL CLK-SOUT Pulse Width Set-up Time Hold Time CLK LATCH tw CLK t w LAT L-H tsetup (L) H-L tsetup (C) L-H thold (L) H-L thold (C) Maximum CLOCK Rise Time tr VDD = 5.0 V VCE = 0.4 V VIH = VDD VIL = GND REXT = 470 VL = 3.0 V RL = 65 CL = 10.5 pF UNIT ns ns 20 30 ns 10 25 ns 25 50 ns 25 50 ns 0 15 ns 0 15 ns 10 s Maximum CLOCK Fall Time tf 10 s Output Rise Time tor 150 300 600 ns Output Fall Time tof 150 300 600 ns 6 2006-06-14 TB62706BN/BF TEST CIRCUIT DC characteristic AC characteristic PRECAUTIONS for USING Utmost care is necessary in the design of the output line, VCC (VDD) and GND line since IC may be destroyed due to short-circuit between outputs, air contamination fault, or fault by improper grounding. 7 2006-06-14 TB62706BN/BF TIMING WAVEFORM 1. CLOCK-SERIAL OUT, OUTn 2. CLOCK- LATCH 3. ENABLE -OUTn 8 2006-06-14 TB62706BN/BF 9 2006-06-14 TB62706BN/BF LED DRIVER TB6270X SERIES APPICATION NOTE Fig.1 10 2006-06-14 TB62706BN/BF [1] Output current (IOUT) IOUT is set by the enternal resistor (R-EXT) as shown in Fig.1. [2] Total supply voltage (VLED) This device can operate 0.4~0.7V (VO). When a higher voltage is input to the device, the excess voltage is consumed inside the device, that leads to power dissipation. In order to minimize power dissipation and loss, we would like to recommend to set the total supply voltage as shown below, VLED (total supply voltage) = VCE (Tr Vsat) + Vf (LED Forward voltage) + VO (IC supply voltage) When the total supply is too high considering the power dissipation of this device, an additional R can decrease the supply voltage (VO). [3] Pattern layout This device owns only one ground pin that means signal ground pin and power ground pin are common. If ground pattern layout contains large inductance and impedance, and the voltage between ground and LATCH, CLOCK terminals exceeds 2.5 V by switching noise in operation, this device may miss-operate. So we would lile you to pay attention to pattern layout to minimize inductance. 11 2006-06-14 TB62706BN/BF Package Dimensions Weight: 1.22 g (typ.) 12 2006-06-14 TB62706BN/BF Package Dimensions Weight: 0.32 g (typ.) 13 2006-06-14 TB62706BN/BF Notes on Contents 1. Block Diagrams Some of the functional blocks, circuits, or constants in the block diagram may be omitted or simplified for explanatory purposes. 2. Equivalent Circuits The equivalent circuit diagrams may be simplified or some parts of them may be omitted for explanatory purposes. 3. Timing Charts Timing charts may be simplified for explanatory purposes. 4. Application Circuits The application circuits shown in this document are provided for reference purposes only. Thorough evaluation is required, especially at the mass production design stage. Toshiba does not grant any license to any industrial property rights by providing these examples of application circuits. 5. Test Circuits Components in the test circuits are used only to obtain and confirm the device characteristics. These components and circuits are not guaranteed to prevent malfunction or failure from occurring in the application equipment. 14 2006-06-14 TB62706BN/BF IC Usage Considerations Notes on Handling of ICs (1) The absolute maximum ratings of a semiconductor device are a set of ratings that must not be exceeded, even for a moment. Do not exceed any of these ratings. Exceeding the rating(s) may cause the device breakdown, damage or deterioration, and may result injury by explosion or combustion. (2) Use an appropriate power supply fuse to ensure that a large current does not continuously flow in case of over current and/or IC failure. The IC will fully break down when used under conditions that exceed its absolute maximum ratings, when the wiring is routed improperly or when an abnormal pulse noise occurs from the wiring or load, causing a large current to continuously flow and the breakdown can lead smoke or ignition. To minimize the effects of the flow of a large current in case of breakdown, appropriate settings, such as fuse capacity, fusing time and insertion circuit location, are required. (3) If your design includes an inductive load such as a motor coil, incorporate a protection circuit into the design to prevent device malfunction or breakdown caused by the current resulting from the inrush current at power ON or the negative current resulting from the back electromotive force at power OFF. IC breakdown may cause injury, smoke or ignition. Use a stable power supply with ICs with built-in protection functions. If the power supply is unstable, the protection function may not operate, causing IC breakdown. IC breakdown may cause injury, smoke or ignition. (4) Do not insert devices in the wrong orientation or incorrectly. Make sure that the positive and negative terminals of power supplies are connected properly. Otherwise, the current or power consumption may exceed the absolute maximum rating, and exceeding the rating(s) may cause the device breakdown, damage or deterioration, and may result injury by explosion or combustion. In addition, do not use any device that is applied the current with inserting in the wrong orientation or incorrectly even just one time. (5) Carefully select external components (such as inputs and negative feedback capacitors) and load components (such as speakers), for example, power amp and regulator. If there is a large amount of leakage current such as input or negative feedback condenser, the IC output DC voltage will increase. If this output voltage is connected to a speaker with low input withstand voltage, overcurrent or IC failure can cause smoke or ignition. (The over current can cause smoke or ignition from the IC itself.) In particular, please pay attention when using a Bridge Tied Load (BTL) connection type IC that inputs output DC voltage to a speaker directly. Points to Remember on Handling of ICs (1) Heat Radiation Design In using an IC with large current flow such as power amp, regulator or driver, please design the device so that heat is appropriately radiated, not to exceed the specified junction temperature (Tj) at any time and condition. These ICs generate heat even during normal use. An inadequate IC heat radiation design can lead to decrease in IC life, deterioration of IC characteristics or IC breakdown. In addition, please design the device taking into considerate the effect of IC heat radiation with peripheral components. (2) Back-EMF When a motor rotates in the reverse direction, stops or slows down abruptly, a current flow back to the motor's power supply due to the effect of back-EMF. If the current sink capability of the power supply is small, the device's motor power supply and output pins might be exposed to conditions beyond maximum ratings. To avoid this problem, take the effect of back-EMF into consideration in system design. 15 2006-06-14 TB62706BN/BF RESTRICTIONS ON PRODUCT USE 060116EBA * The information contained herein is subject to change without notice. 021023_D * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. 021023_A * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. 021023_B * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. 060106_Q * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. 021023_C * The products described in this document are subject to the foreign exchange and foreign trade laws. 021023_E 16 2006-06-14