500/1000 VA PROGRAMMABLE AC POWER SOURCE C uss jcrp fC Control LAN _ RS-232 A AAS AAA The APS-7000 Series is a precision AC power source, but also a powerful analyzer, containing abundant features for the testing and characteristic analysis of power supplies, electronic devices, components and modules. In additional to AC power Source , the APS-7000 Series is fully programmable to simulate different power outputs. Sequence can be created using arbitrary waveforms as well as voltage or frequency sweep. Voltage, current, power, frequency, load power factor, load crest factor can be monitored in real time. All parameters and values as well as measurement results are displayed simultaneously on the 4.3 inch TFT-LCD screen, The APS-7000 Series comprises nine measurement and test functions (Vrms, Irms, F, Ipk, W, VA, PF, Ipk hold, CF), and provides user interface similar to that of AC Power Meter. The APS-7000 Series, via switching many sets of current levels to increase small current measurement resolution, is ideal for the LED industry and standby mode power consumption test. Under the ARB mode, the APS-7000 Series provides waveforms, including SINE waveform, Triangle waveform, Staircase waveform, Clipped Sinewave, Crest factor waveform, Surge waveform, and Fourier series to meet the requirement of simulating abnormal input power waveform test of different industry. Ten sets of Preset allow users to store ten settings; Power ON Output setting allows Sequence, Simulate, and Program to automatically execute output after the equipment power is on. To meet the test criteria of line voltage fluctuation often seen in consumer electronics, the APS-7000 Series features five methods to cope with special purpose or abnormal voltage, frequency, and phase; ten sets of the Simulate mode simulate power outage, voltage rise, and voltage fall; ten sets of the Sequence mode allow users to define parameters and produce sine wave by editing steps; ten sets of the Program mode can edit AC waveform output and define the ceiling and floor level of measurement items for different DUT; Ramp Control allows users to set the variation speed for output voltage rise and fall; Surge/Dip Control simulates DUT's input power producing a Surge or Dip voltage overlapping with output voltage waveform at a specific time. Ethernet Port, on the rear panel of the series, can be used for remote program control; Sync Output Socket provides external 10V sync output; Signal Output Connector provides monitor of Program execution results. The APS-7000 Series also provides Trigger In/Out and Output on/off remote control functions from J1 connector on the rear panel. APS-7000 Series FEATURES e 4.3 large LCD Display e Measurement Function : Voltage, Current, Power (W), Frequency, Power Factor, Crest Factor, Apparent Power (VA), Ipeak, Ipk hold e Surge/Dip Control Mode e Frequency : 45.0~500.0Hz (Standard); 45,0~999.9Hz(Opt) Voltage Range (RMS) : 155V (Std)/ 310V (Std)/600V (Opt) e OCP/OTP/OHP Protection 10sets of Saves/Recall Sequence Memory with 255 step for each memory e Arbitrary Waveform Function Standard Interface : USB/LAN Optional Interface : RS-232 & USB CDC/ GPIB APS-7100 Rear Panel APPLICATIONS * The Broad Power Output Range of The Series is Ideal for Various Power Supply Manufacturers e The Development of Electronic Components and Testing Applications for Manufacturers e Incoming Quality Control and R & D Applications GW INSTEK Simply Reliable SPECIFICATIONS Step Time Setting Operation Within Step Parameters Sequence Control Model APS-7050 APS-7100 Power Rating 500VA 1000VA Output Voltage 0 ~ 310.0 Vrms 0 ~ 310.0 Vrms Output Frequency 45.00 ~ 500.0 Hz 45.00 ~ 500.0 Hz Maximum Current (r.m.s) 0~155Vrms | 4.2A 8.4A 0~310Vrms | 2.1A 4.2A Maximum Current (peak) 0~155Vrms | 16.8A 33.6A 0~310Vrms | 8.4A 16.8A Total Harmonic Distoration (THD) 0.5% at 45 ~ 500Hz (Resistive Load) Crest Factor 24 Line regulation 0.1% (% of full scale) Load regulation 0.5% (% of full scale) Response time <100us SETTING Voltage Range 155Vrms/310Vrms/Auto Resolution | 0.01V at 0.00 ~ 99.99Vrms; 0.1V at 100.0 ~ 310.0Vrms Accuracy +(0.5% of setting+2 counts) Frequency Range 45 ~ 500Hz Resolution | 0.01Hz at 45.00 ~ 99.99Hz/0.1Hz at 100.0 ~ 500.0Hz Accuracy 0.02% of setting Power On/Off Phase Range 0 ~ 359 Angle Resolution P Accuracy +1(45 ~ 65Hz) MEASUREMENT Voltage(RMS) Range 0.20 ~ 38.75Vrms/38.76 ~ 77.50 Vrms/77.51 ~ 155.0Vrms/155.1 ~ 310.0Vrms Resolution 0.01V at 0.00 ~ 99.99Vrms; 0.1V at 100.0 ~ 310.0Vrms Accuracy +(0.5% of reading + 2 counts) Frequency Range 45 ~ 500Hz Resolution | 0.01Hz (at 45Hz~99.99H7z) /0.1Hz (at 100Hz~500.0Hz) Accuracy +0.1Hz Current(RMS) Range 2.00 ~ 70.00mA/60.0 ~ 350.0mA/0.300 ~ 3.500A/3.00 ~ 17.5A Resolution | 0.01mA, 0.1mA, 0.001A, 0.01A Accuracy +(0.6% of reading+5 counts); 2.00~350.0mA/+(0.5% of reading+5 counts); 0.350~3.500A/+(0.5% of reading+3 counts) ;3.500~17.50A Current(Peak) Range 0.0 ~ 70.0A Resolution | 0.1A Accuracy +(1% of reading+1 count) Power(W) Resolution | 0.01W, 0.1W, 1W Accuracy +(0.6% of reading + 5 counts); 0.20~99.99W; +(0.6% of reading + 5 counts); 100.0 ~ 999.9W +(0.6% of reading + 2 counts); 1000~9999W Apparent(VA) Resolution 0.01VA, 0.1VA, 1VA, Accuracy +(1% of reading + 5 counts) ;0.20~99.99VA/+(1% of reading + 5 counts);100.0~999.9VA/+(1% of reading + 2 counts);1000~9999VA Power Factor Range 0.000~1.000 Resolution | 0.001 Accuracy +(2% of reading + 2 counts) GENERAL Remote Output Signal Pass , Fail, Test-in Process, Trigger in, Trigger out, OUT ON / OFF Sync Output Signal Output Signal 10V, BNC type Number of Preset 10(0~9 Numeric keys) Protection OCP, OPP, OHP and Alarm SEQUENCE / SIMULATION / FUNCTION Number of Memories 10 (0~ 9 Numeric keys) Number of Steps 255 max. (For 1 sequence) 0.01 ~ 99.99S Constant / Keep / Linear Sweep Output Range, Frequency, Waveform (Sine Wave Only); On Phase, Off Phase, Term Jump Count (0 ~ 255) jump-to, Branch 1, Branch 2, Trigger Output Start, Stop, Hold, Continue, Branch 1, Branch 2 ENVIRONMENT CONDITIONS Operation Temperature Storage Temperature Operating Temperature Storage Humidity PC REMOTE CONTROL INTERFACE 0 ~ +40C -10 ~ +70C 20 ~ 80% RH (No Condensation) 80% RH or less(No Condensation) Standard Interface Optional Interface Input Power Source USB Host/LAN GPIB/RS232 & USB CDC 1@ AC 100/200Vac +10% (For Japan); 1p AC 115/230Vac +15%(For others country excluding Japan) DIMENSIONS 430(W) x 88(H) x 400(D) mm; Approx. 24Kg 430(W) x 88(H) x 560(D) mm; Approx. 38Kg ee em Reedy ACCESSORIES Mains Terminal Cover Set GTL-123 Test Leads APS-7050 500VA Programmable AC Power Source APS-7100 1000VA Programmable AC Power Source CD ROM (User Manual, Programming Manual) x 1 Power Cord for UL/CSA or PSE (Region Dependent) Specifications subject to change without notice. APS-7000GD1DH ASSESSORIES APS-003 Output Voltage Capacity : 0 ~ 600Vrms APS-004 Output Frequency Capacity : 45~999.9Hz OPTIONAL ASSESSORIES APS-001_ GPIB Interface Card APS-002 RS-232/USB Interface Card GRA-423 APS-7000 Rack Mount Kit Global Headquarters GOOD WILL INSTRUMENT CO., T +886-2-2268-0389 F +886-2-2268-0639 China Subsidiary GOOD WILL INSTRUMENT (SUZHO T +86-512-6661-7177 F +86-512-6661-7277 Malaysia Subsidiary GOOD WILL INSTRUMENT (M) SDN. BHD. T +604-6309988 F +604-6309989 Europe Subsidiary GOOD WILL INSTRUMENT EURO B.V. T +31(0)40-2557790 F +31(0)40-2541194 U.S.A. Subsidiary INSTEK AMERICA CORP. T +1-909-399-3535 F +1-909-399-0819 LTD. Japan Subsidiary TEXIO TECHNOLOGY CORPORATION. T +81-45-620-2305 F +81-45-534-7181 U) CO., LTD. GW INSTEK Simply Reliable Korea Subsidiary GOOD WILL INSTRUMENT KOREA CO., LTD. T +82-2-3439-2205 F +82-2-3439-2207 www.gwinstek.com