SB01-05C
No. A0406-1/3
Applications
•High frequency rectification (switching regulators, converters, choppers).
Features
•Low forward voltage (VF max=0.55V).
•Fast reverse recorvery time (trr max=10ns).
•Low switching noise.
•Low leakage current and high reliability due to highly reliable planar structure.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Repetitive Peak Reverse Voltage VRRM 50 V
Nonrepetitive Peak Reverse Surge Voltage VRSM 55 V
Average Output Current IO100 mA
Surge Forward Current IFSM 50Hz sine wave, 1 cycle 2 A
Junction Temperature Tj --55 to +125 °C
Storage Temperature Tstg --55 to +125 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Reverse Voltage VRIR=50µA, Tj=25°C50V
Forward Voltage VFIF=100mA, Tj=25°C 0.55 V
Reverse Current IRVR=25V, Tj=25°C15µA
Interterminal Capacitance C VR=10V, f=1MHz 4.4 pF
Reverse Recovery Time trr
IF=IR=10mA, Tj=25°C, See specified Test Circuit.
10 ns
Rthj-a(1) 560 °C / W
Thermal Resistance Rthj-a(2) Mounted in Cu-foiled area of 16mm2✕0.2mm 410 °C / W
on glass epoxy board
Marking : A
Ordering number : ENA0406
71206 / 42506SB MS IM TA-100743
SB01-05C Schottky Barrier Diode
50V, 100mA Rectifier
SANYO Semiconductors
DATA SHEET
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
http://semicon.sanyo.com/en/network
SB01-05C
No. A0406-2/3
Package Dimensions trr Test Circuit
unit : mm
7013A-004
1 : Anode
2 : No Contact
3 : Cathode
SANYO : CP
12
3
1.5
2.5
1.1
0.3
0.05
2.9
0.95 0.4
0.1
0.5
0.5
0.02
0.04
0.06
0.08
0.10
10 20 30 40 50 60 70
2
5
2
5
2
5
2
5
1000
100
10
1.0
2
5
0.1
0.01 0
ID00261
0.2 0.3 0.4 0.5 0.70.60.10
ID00260
Ta=
125°
C
100°
C
25°C
50°C
75°C
2
1.0
10
3
7
5
2
3
5
7
5
2
2
1.0
10
3
7
5
100
3
7
5
2
3
5
23 57
1.0 10 23 57
100
ID00263
Ta=125°C
25°C
f=1MHz
(3)
(1)
00 0.02 0.04 0.06 0.08 0.10 0.12 0.14
IT03696
(2) (4)
IF -- VFIR -- VR
PF(AV) -- IO
Forward Voltage, VF -- V
Forward Current, IF -- mA
Reverse Voltage, VR -- V
Reverse Current, IR -- µA
Average Output Current, IO -- A
Average Forward Power Dissipation, PF(AV) -- W
Reverse Voltage, VR -- V
Interterminal Capacitance, C -- pF
(1)Rectangular wave θ=60°
(2)Rectangular wave θ=120°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
180°
360°
θ
360°
Rectangular
wave
Sine wave
C -- VR
Duty≤10%
50Ω100Ω10Ω
5V trr
10µs
10mA10mA
1.0mA
SB01-05C
No. A0406-3/3
21.0
3235720.1
357
0.01
7
0
0.4
0.8
2.0
2.4
1.2
1.6
2.8 IFSM -- t
IS
20ms
t
Time, t -- s
Surge Forward Current, IFSM(Peak) -- A
Current waveform 50Hz sine wave
ID00264
PS
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state,
and are not guarantees of the performance, characteristics, and functions of the described products
as mounted in the customer's products or equipment. To verify symptoms and states that cannot be
evaluated in an independent device, the customer should always evaluate and test devices mounted
in the customer's products or equipment.
SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any
and all semiconductor products fail with some probability. It is possible that these probabilistic failures
could give rise to accidents or events that could endanger human lives, that could give rise to smoke or
fire, or that could cause damage to other property. When designing equipment, adopt safety measures
so that these kinds of accidents or events cannot occur. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO Semiconductor products (including technical data,services) described
or contained herein are controlled under any of applicable local export control laws and regulations, such
products must not be exported without obtaining the export license from the authorities concerned in
accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO Semiconductor product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO Semiconductor believes information herein is accurate
and reliable, but no guarantees are made or implied regarding its use or any infringements of
intellectual property rights or other rights of third parties.
This catalog provides information as of April, 2006. Specifications and information herein are subject
to change without notice.
