https://www.phoenixcontact.com/us/products/0900210
01/17/2021Page1/6
Electronic device circuit breaker-ECP-E 2A-0900210
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Electronic device circuit breaker, number of positions:1, connection method:Screw connection, width:12.5 mm,
fuse type:electronic, fuse type:Automatic device, mounting type:on base element, Color:black
Your advantages
Can be plugged onto TMCP SOCKET M base
Design width of just 12.5 mm
The operating or error state is indicated by a multi-color LED as well as an integrated status output (12)
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356103992
Weight per Piece (excluding packing) 41.500 g
Custom tariff number 85362010
Country of origin Germany
Technical data
General
Installation instructions
When mounted in rows without convection cooling, the nominal device
current should only be led to a maximum of 80% due to the thermal effect
during continuous operation (100% operating factor).
Special precautionary measures must be taken in systems or machines, to
prevent components from restarting (e.g., use of a safety PLC).
Parallel connection of multiple circuit breakers is not permitted.
Mounting type on base element
Color black
https://www.phoenixcontact.com/us/products/0900210
01/17/2021Page2/6
Electronic device circuit breaker-ECP-E 2A-0900210
Technical data
General
Number of positions 1
Overvoltage category II
Insulating material PA66/6
Flammability rating according to UL 94 V0
Electrical data
Fuse electronic
Fuse type Automatic device
Rated surge voltage 0.5 kV
Operating voltage 24 VDC
24 VDC (at 50 °C (UL 2367, UL 508, ANSI/ISA 12.12.01))
18 VDC ... 32 VDC
Nominal current IN2 A
Required backup fuse not required, integrated failsafe element
Dielectric strength max. 32 VDC (Load circuit)
Degree of pollution 2
Overvoltage category II
Insulating material group I
Switching capacity ICN Active current limitation
Closed-circuit current range I0 typ. 25 mA ±5mA (When switched on)
Dimensions
Height 60 mm
Width 12.5 mm
Depth 70 mm
Height NS 35/7,5 144 mm
Height NS 35/15 151.5 mm
Complete module height 115 mm
Complete module width 38 mm
Complete module depth 112.5 mm
Ambient conditions
Degree of protection IP30 (Actuation area)
Ambient temperature (operation) 0 °C ... 50 °C (non-condensing)
Connection data
Connection method Screw connection
Standards and Regulations
Standards/specifications UL 2367
https://www.phoenixcontact.com/us/products/0900210
01/17/2021Page3/6
Electronic device circuit breaker-ECP-E 2A-0900210
Technical data
Standards and Regulations
UL 508
CSA22.2 No. 14
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Block diagram
2
12
14
13
11
1
Control Unit
LINE (+)
Reset
Status
Reset
LOAD (L+)
GND (-)
On/Off
Diagram
Stop point
typ. 1,1 x l 1,8 x l
Switching time [s]
Multiples of IN
NN
0,01
0,1
1
10
102
103
104
5
10 2 3
I
K
Classifications
eCl@ss
eCl@ss 10.0.1 27140401
eCl@ss 11.0 27140401
eCl@ss 4.0 27141100
eCl@ss 4.1 27141100
eCl@ss 5.0 27141100
eCl@ss 5.1 27141100
eCl@ss 6.0 27141100
eCl@ss 7.0 27141116
eCl@ss 8.0 27141116
eCl@ss 9.0 27141116
ETIM
ETIM 2.0 EC000899
https://www.phoenixcontact.com/us/products/0900210
01/17/2021Page4/6
Electronic device circuit breaker-ECP-E 2A-0900210
Classifications
ETIM
ETIM 3.0 EC000899
ETIM 4.0 EC000899
ETIM 5.0 EC000899
ETIM 6.0 EC000899
ETIM 7.0 EC000899
UNSPSC
UNSPSC 6.01 30211812
UNSPSC 7.0901 39121411
UNSPSC 11 39121411
UNSPSC 12.01 39121411
UNSPSC 13.2 39121410
UNSPSC 18.0 39121410
UNSPSC 19.0 39121410
UNSPSC 20.0 39121410
UNSPSC 21.0 39121410
Approvals
Approvals
Approvals
UL Recognized
Ex Approvals
UL Recognized / CSA
Approval details
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 317172
Accessories
Accessories
Marker pen
https://www.phoenixcontact.com/us/products/0900210
01/17/2021Page5/6
Electronic device circuit breaker-ECP-E 2A-0900210
Accessories
Marker pen-X-PEN 0,35-0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Terminal marking
Zack marker strip-ZB 6:UNBEDRUCKT-1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels:
10
Zack marker strip-ZB 6/WH-100:UNBEDRUCKT-5060935
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels:
10
Additional products
Box mounting base-TMCP SOCKET M-0916589
Modular socket element, 2-position, for holding two circuit breakers, each with a single position
End cover-TMCP CONNECT LR-0916592
End cover, width:6 mm, Color:black
https://www.phoenixcontact.com/us/products/0900210
01/17/2021Page6/6
Electronic device circuit breaker-ECP-E 2A-0900210
Accessories
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com