EVERLIGHT ELECTRONICS CO., LTD.
MODEL NO: 11-22 SURSYGC/S530-A2/TR8 Device Number：DSE-112-019 REV. 1.0
Chip LEDs with Bi-Color(Multi-Color)
ECN
： Page: 1/9
█
██
█ Features：
：：
：
．Package in 8m m tape on 7“ diameter
reel .
．Com patible with automatic placement
equipment.
．Compatible with infrared and vapor
phase reflow solder process.
．Multi-color type.
█
██
█ Description：
：：
：
． The 11-22 SMD Taping is much smaller than le-
aded components, thus enable smaller board size,
higher packing density, reduced storage space and
finally smaller equipment to be obtained.
． Besides, light Weight makes them ideal for minia-
ture application, etc.
█
██
█ Applications：
：：
：
．Automotive: backlighting in dashboard and switch.
．Telecommunication: indicator and backlighting in telephone and fax. ■
■■
■ Notes：
：：
：
．Flat backlight for LCD, switch and symbol.
．General use.
CHIP
Material Emitted Color
SUR: AlGaInP Hyper Red
SYG: AlGaInP Super Green
Office : NO 25,Lane.76,Chung Yang Rd.,Sec.3,
Tucheng, Taipei 236,Taiwan, R.O.C.
TEL : 886-2-2267-2000,2266-9936(22 Lines)
FAX : 886-2-2267-6189
Http://www.everlight.com
Tolerances Unless Dimension ±
0.1mm
Lens ColorPART NO
█
██
█ Package Dimension：
：：
：
Water Clear
11-22SURSYGC/S530-A2/TR8
SUR
SYG
EVERLIGHT ELECTRONICS CO., LTD.
MODEL NO: 11-22 SURSYGC/S530-A2/TR8 Device Number：DSE-112-019 REV. 1.0
Chip LEDs with Bi-Color(Multi-Color)
ECN
： Page: 2/9
■
■■
■ Package Dimension：
：：
：
■
■■
■ Loaded quantity per reel 2000 pcs/reel：
：：
：
EVERLIGHT ELECTRONICS CO., LTD.
MODEL NO: 11-22 SURSYGC/S530-A2/TR8 Device Number：DSE-112-019 REV. 1.0
Chip LEDs with Bi-Color(Multi-Color)
ECN
： Page: 3/9
■
■■
■ Absolute Maximum Ratings at Ta = 25℃
℃℃
℃
Parameter Symbol Rating Unit
Reverse Voltage Vr 5V
Forward Current If SUR: 25
SYG: 25 mA
Operating Temperature Topr -40 ~ +85 ℃
Storage Temperature Tstg -40 ~ +90 ℃
Soldering Temperature Tsol 260 (for 5 second) ℃
Power Dissipation Pd SUR: 60
SYG: 60 mW
Peak Forward
Current(Duty 1/10 @
1KHZ) If(Peak) SUR: 160
SYG: 160 mA
■
■■
■ Reliability Test Item And Condition
NO Item Test Conditions Test
Hours/Cycle Sample
Size Ac/Re
1Solder Heat TEMP : 260℃ ± 5 ℃5 SEC 76 Pcs 0/1
2Temperature Cycle H : +85℃ 30min
∫ 5 min
L : -55℃ 30min 50 CYCLE 76 Pcs 0/1
3Thermal Shock H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min 50 CYCLE 76 Pcs 0/1
4High Temperature Storage TEMP : 100℃1000 HRS 76 Pcs 0/1
5Low Temperature Storage TEMP : -55℃1000 HRS 76 Pcs 0/1
6DC Operating Life If = 20 m A 1000 HRS 76 Pcs 0/1
7High Temperature /
High Humidity 85℃/85% RH 1000 HRS 76 Pcs 0/1
EVERLIGHT ELECTRONICS CO., LTD.
MODEL NO: 11-22 SURSYGC/S530-A2/TR8 Device Number：DSE-112-019 REV. 1.0
Chip LEDs with Bi-Color(Multi-Color)
ECN
： Page: 4/9
■
■■
■ Electronic Optical Characteristics :
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous
intensity Iv SUR:
SYG:
21
14
51
21 ----- mcd If=20mA
Viewing
Angle 2θ1/2 ----- 60 ----- deg If=20mA
Peak
Wavelength
λp SUR:
SYG: ----- 632
575 ----- nm If=20mA
Dominant
Wavelength
λd SUR:
SYG: ----- 624
573 ----- nm If=20mA
Spectrum
Radiation
Bandwidth
△λ SUR:
SYG: ----- 20
20 ----- nm If=20mA
Forward
Voltage
Vf SUR:
SYG: ----- 2.0
2.0 2.4
2.4 V If=20mA
Reverse
Current Ir ----- ----- 10 µAVr=5V
EVERLIGHT ELECTRONICS CO., LTD.
MODEL NO: 11-22 SURSYGC/S530-A2/TR8 Device Number：DSE-112-019 REV. 1.0
Chip LEDs with Bi-Color(Multi-Color)
ECN
： Page: 5/9
■
■■
■ Typical Electro-Optical Characteristic Curves
SUR
EVERLIGHT ELECTRONICS CO., LTD.
MODEL NO: 11-22 SURSYGC/S530-A2/TR8 Device Number：DSE-112-019 REV. 1.0
Chip LEDs with Bi-Color(Multi-Color)
ECN
： Page: 6/9
■
■■
■ Typical Electro-Optical Characteristic Curves
SYG
EVERLIGHT ELECTRONICS CO., LTD.
MODEL NO: 11-22 SURSYGC/S530-A2/TR8 Device Number：DSE-112-019 REV. 1.0
Chip LEDs with Bi-Color(Multi-Color)
ECN
： Page: 7/9
■
■■
■ Test Circuit
■
■■
■ Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause
big current change ( Burn out will happen ).
2. Storage time
2.1 The operation of temperature and R.H. are : 5℃~35℃, R.H.60%.
2.2 Once the package is opened , the products should be used within a week.
Otherwise , they should be keep in a dampproof box with desiccants.
Considering the tape life , we suggest our customers to use our products
within a year(from production date).
2.3 If opened more than one week in an atmosphere 5℃~35℃, R.H.60%,
they should be treated at 60℃±5℃for 15hrs.
2.4 When you discover that the desiccant in the package has a pink color
(normal=blue) , you should treat them in the same conditions as 2.3.
EVERLIGHT ELECTRONICS CO., LTD.
MODEL NO: 11-22 SURSYGC/S530-A2/TR8 Device Number：DSE-112-019 REV. 1.0
Chip LEDs with Bi-Color(Multi-Color)
ECN
： Page: 8/9
■
■■
■ Soldering heat reliability ( DIP )
Please refer to the following figure :
■ Soldering Iron
Basic spec is ≦5 sec when 260℃.If tem perature is higher, time should be shorter (+10℃
→ -1sec). Power dissipation of iron should be smaller than 15 W , and temperature should
be controllable.Surface tem perature of the device should be under 230 ℃.
■ Rework
1. Customer must finish rework within 5 sec under 260℃.
2. Copper foil can not be touched by the head of iron.
3. Tw in-head type is preferred.
○×
EVERLIGHT ELECTRONICS CO., LTD.
MODEL NO: 11-22 SURSYGC/S530-A2/TR8 Device Number：DSE-112-019 REV. 1.0
Chip LEDs with Bi-Color(Multi-Color)
ECN
： Page: 9/9
■
■■
■ Reflow Temp / Time：
：：
：
preheat
cooling
to rise
