1398
Related Information
Compact timers with four
switchable time ranges
Timer
PMH Timer
RoHS compliance
PRODUCT TYPES
TIME RANGE
Time range Scale intervals
1.0 0.05
3.0 0.1
10 0.5
30 1
OPERATION MODE
ON(Red)
OFF
OFF
OFF
ON
ON
ON
Set time
UP(Yellow)
·
During UP:
Yellow stays on
·
During ON:
Red stays on
Power
supply
Timed-out
contact
(NO)
Timed-out
contact
(NC)
PRECAUTIONS DURING USAGE
• In order to maintain the characteristics of PHM timer, do not remove the case.
• Please use within an ambient temperature range of -10 to +50 °C +14 to 122 °F and in humidity no greater than 85 % RH.
• Prevent using PMH timer in such places where ammable or corrosive gas is generated, a lot of dust exists or considerable shock and vibration occur.
• Since the main body cover and knob are made of polycarbonate resin, prevent contact with organic solvents such as methyl alcohol, benzene and
thinner, or strong alkaline materials such as ammonia and caustic soda.
• Do not make direct solder connections to the round pins.
• Carefully verify the terminal numbers when wiring the terminal socket and cap.
• When rotating the knob, note that there are stoppers located just past the "0" side and the full scale side. Therefore, do not use unreasonable force.
• Please use with a time setting that is no less than the minimum time limit. The minimum time limit is indicated on the dial by the mark.
• The contacts will not operate if the needle is adjusted to the "0" position when the power is off.
• Phase synchronization for AC load switching
When timer output contact will be synchronized to the AC power phase, the electrical life may be compromised and locking (contact reset failure) may
occur due to contact welding or contact transference. Therefore, please conduct tests using actual equipment.
Ordering information
Timer type Time range Rated operating voltage
PMH Timer
10M 0.05 to 1 s 0.5 to 10 s 0.05 to 1 min 0.5 to 10 min 120 V AC: 100 to 120 V AC
30M 0.15 to 3 s 1.5 to 30 s 0.15 to 3 min 1.5 to 30 min 220 V AC: 200 to 240 V AC
10H 0.05 to 1 min 0.5 to 10 min 0.05 to 1 h 0.5 to 10 h 12 V DC: 12 V DC
30H 0.15 to 3 min 1.5 to 30 min 0.15 to 3 h 1.5 to 30 h 24 V DC: 24 V DC
PMHEx. 10M 120 V AC
Product
name
Operating
voltage
10 M type 30 M type 10 H type 30 H type
Model No. Model No. Model No. Model No.
PMH timer
100 to 120 V AC PMH-10M-AC120V PMH-30M-AC120V PMH-10H-AC120V PMH-30H-AC120V
200 to 240 V AC PMH-10M-AC220V PMH-30M-AC220V PMH-10H-AC220V PMH-30H-AC220V
12 V DC PMH-10M-DC12V PMH-30M-DC12V PMH-10H-DC12V PMH-30H-DC12V
24 V DC PMH-10M-DC24V PMH-30M-DC24V PMH-10H-DC24V PMH-30H-DC24V
48 V DC PMH-10M-DC48V PMH-30M-DC48V PMH-10H-DC48V PMH-30H-DC48V
100 to 110 V DC PMH-10M-DC100V PMH-30M-DC100V PMH-10H-DC100V PMH-30H-DC100V
■General terms and conditions ............. F-3 ■Selection guide ........................... P.1383~
■Options ......................................... P.1426
* Refer to our website for details of product.
panasonic.net/id/pidsx/global
Features
• Using a dedicated IC, the operation time
variance is ±0.5 %.
• Using the slide, time range switching is easy.
Moreover, the scale numbers on the dial and
time units can be switched automatically.
• You can use for embedding if you use together
with the appropriate ush type mounting frame
designed for that purpose (sold separately).
Time selectable
Button
position
S
1
S
10
M
1
10
M
Type
10 M type
0.05 S to 1.0 S
0.5 S to 10 S
0.05 M to 1.0 M
0.5 M to 10 M
30 M type
0.15 S to 3.0 S
1.5 S to 30 S
0.15 M to 3.0 M
1.5 M to 30 M
10 H type
0.05 M to 1.0 M
0.5 M to 10 M
0.05 H to 1.0 H
0.5 H to 10 H
30 H type
0.15 M to 3.0 M
1.5 M to 30 M
0.15 H to 3.0 H
1.5 H to 30 H
S: Sec, M: Min, H: Hours
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
PLC
HUMAN MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
FA COMPONENTS
MACHINE VISION
SYSTEMS
UV CURING
SYSTEMS
Timers
Time Switches
Counters
Hour Meters
Options
Limit Switches
Temperature
Controllers
Solenoids
Fan Motors
Selection
Guide
LT4H series
QM4H
PM4S
PM4H series
S1DXM-A/M
S1DX
PMH
