SG PARAMETER SYMBOL MAX UNITS 1 1 1 1 1 1 1 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input Bias Current, -IN Input Offset Current IQ VOS VOS VOS +IB -IB IOS 25C 25C 25C 25C 25C 25C 25C 100V 100V 15V 150V 100V 100V 100V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 8.5 2 3.7 3 50 50 50 mA mV mV mV pA pA pA 3 3 3 3 3 3 3 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input BiasCurrent, -IN Input Offset Current IQ VOS VOS VOS +IB -IB IOS -55C -55C -55C -55C -55C -55C -55C 100V 100V 15V 150V 100V 100V 100V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 9.5 4.4 6.1 5.4 50 50 50 mA mV mV mV pA pA pA 2 2 2 2 2 2 2 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input Bias Current, -IN Input Offset Current IQ VOS VOS VOS +IB -IB IOS 125C 125C 125C 125C 125C 125C 125C 100V 100V 15V 150V 100V 100V 100V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 11 5 6.7 6 10 10 10 mA mV mV mV nA nA nA 4 4 4 4 4 4 4 4 Output Voltage, IO = 150mA Output Voltage, IO = 29mA Output Voltage, IO = 80mA Current Limits Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO ICL EN SR AOL CMR 25C 25C 25C 25C 25C 25C 25C 25C 31V 150V 90V 30V 100V 100V 100V 32.5V RL = 100 RL = 5K RL = 1K RL = 100 RL = 5K, AV = 1, CL = 10nF RL = 5K RL = 5K, F = 10Hz RL = 5K, F = DC, VCM = 22.5V 15 145 80 75 6 6 6 6 6 6 6 Output Voltage, IO = 100mA Output Voltage, IO = 29mA Output Voltage, IO = 70mA Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO EN SR AOL CMR -55C -55C -55C -55C -55C -55C -55C 31V 150V 90V 100V 100V 100V 32.5V RL =100 RL = 5K RL = 1K RL = 5K, AV = 1, CL = 10nF RL = 5K RL = 5K, F = 10Hz RL = 5K, F = DC, VCM = 22.5V 10 145 70 5 5 5 5 5 5 5 Output Voltage, IO = 150mA Output Voltage, IO = 29mA Output Voltage, IO = 80mA Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO EN SR AOL CMR 125C 125C 125C 125C 125C 125C 125C 31V 150V 90V 100V 100V 100V 32.5V RL = 100 RL = 5K RL = 1K RL = 5K, AV = 1, CL = 10nF RL = 5K RL = 5K, F = 10Hz RL = 5K, F = DC, VCM = 22.5V 15 145 80 BURN IN CIRCUIT TEMP. POWER TEST CONDITIONS 20 96 90 20 96 90 20 96 90 125 1 100 1 100 1 100 V V V mA mV V/s dB dB V V V mV V/s dB dB V V V mV V/s dB dB * These components are used to stabilize device due to poor high frequency characteristics of burn in board. ** Input signals are calculated to result in internal power dissipation of approximately 2.1W at case temperature = 125C. MIN This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible* inaccuracies or omissions. All specifications subject to change without notice. APEX MICROTECHNOLOGY CORPORATION * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 ORDERS (520) 690-8601 * EMAILare prodlit@apexmicrotech.com PA08MU REV I JULY 2002 (c) 2002 Apex Microtechnology Corp. 1