General Description
The MAX398/MAX399 precision, monolithic, CMOS ana-
log multiplexers (muxes) offer low on-resistance (less
than 100Ω), which is matched to within 6Ωbetween
channels and remains flat over the specified analog sig-
nal range (11Ωmax). They also offer low leakage over
temperature (NO off-leakage current less than 2.5nA at
+85°C) and fast switching speeds (transition time less
than 250ns). The MAX398 is an 8-channel device, and
the MAX399 is a dual 4-channel device.
The MAX398/MAX399 are fabricated with Maxim’s low-
voltage silicon-gate process. Design improvements
yield extremely low charge injection (less than 5pC) and
guarantee electrostatic discharge protection (ESD)
greater than 2000V.
These muxes operate with a single +3V to +15V supply or
bipolar ±3V to ±8V supplies, while retaining CMOS-logic
input compatibility and fast switching. CMOS inputs pro-
vide reduced input loading. The MAX398/MAX399 are
pin compatible with the industry-standard DG408,
DG409, DG508A, and DG509A.
Applications
Sample-and-Hold Circuits
Automatic Test Equipment
Heads-Up Displays
Guidance and Control Systems
Military Radios
Communications Systems
Battery-Operated Systems
PBX, PABX
Audio Signal Routing
Low-Voltage Data-Acquisition Systems
Features
Pin Compatible with Industry-Standard
DG408/DG409/DG508A/DG509A
Guaranteed On-Resistance Match
Between Channels (< 6Ω)
Low On-Resistance (< 100Ω)
Guaranteed Flat On-Resistance over Signal
Range (< 11Ω)
Guaranteed Low Charge Injection (< 5pC)
NO Off-Leakage Current < 1nA at +85°C
COM Off-Leakage Current < 2.5nA at +85°C
ESD Protection > 2000V
+3V to +15V Single-Supply Operation
±3V to ±8V Bipolar-Supply Operation
Low Power Consumption (< 300µW)
Rail-to-Rail Signal Handling
TTL/CMOS-Logic Compatible
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
________________________________________________________________ Maxim Integrated Products 1
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
A1
A2
GND
V+
N01
V-
EN
A0
TOP VIEW
MAX398
NO5
NO6
NO7
NO8
COM
N04
N03
N02
DIP/SO/QSOP
QFN
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
A1
GND
V+
NO1B
N01A
V-
EN
A0
MAX399
NO2B
NO3B
NO4B
COMB
COMA
N04A
N03A
N02A
DIP/SO/QSOP
EN
A0
A1
GND
N04A
COMA
COMB
N04B
N01A
V-
N02A
N03A
N01B
V+
N02B
N03B
16 15 14
12
11
10
1
2
3
9
4
13
5678
MAX399
QFN
EN
A0
A1
A2
N04
COM
N08
N07
N01
V-
N02
N03
V+
GND
N05
N06
16 15 14
12
11
10
1
2
3
9
4
13
5678
MAX398
Pin Configurations
19-0299; Rev. 5; 1/07
Ordering Information
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
PART TEMP RANGE PIN-
PACKAGE
PKG
CODE
MAX398CGE 0°C to +70°C 16 QFN-EP* G1655-3
MAX398CEE 0°C to +70°C 16 QSOP E16-1
MAX398CSE 0°C to +70°C16 Narrow S16-1
MAX398CPE 0°C to +70°C16 Plastic P16-1
MAX398C/D 0°C to +70°C Dice**
MAX398EGE -40°C to + 85°C 16 QFN-EP* G1655-3
MAX398EEE -40°C to + 85°C 16 QSOP E16-1
MAX398ESE -40°C to + 85°C16 Narrow S16-1
MAX398EPE -40°C to + 85°C16 Plastic P16-1
MAX398EJE -40°C to + 85°C 16 CERDIP J16-1
MAX398MJE -55°C to +125°C 16 CERDIP J16-1
Ordering Information continued at end of data sheet.
*EP = Exposed pad.
**Contact factory for dice specifications.
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = +5V ±10%, V- = -5V ±10%, GND = 0, VAH = VENH = +2.4V, VAL = VENL = +0.8V, TA= TMIN to TMAX, unless otherwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Voltage Referenced to GND
V+ .......................................................................-0.3V to +17V
V- ........................................................................+0.3V to -17V
V+ to V-...............................................................-0.3V to +17V
Voltage into Any Terminal (Note 1).........(V- - 2V) to (V+ + 2V) or
30mA (whichever occurs first)
Current into Any Terminal ...................................................30mA
Peak Current, Any Terminal
(pulsed at 1ms, 10% duty cycle max) ............................40mA
Continuous Power Dissipation (TA= +70°C)
QFN (derate 18.5mW/°C above +70°C) ....................1484mW
QSOP (derate 8.3mW/°C above +70°C)......................667mW
Narrow SO (derate 8.7mW/°C above +70°C) ..............696mW
Plastic DIP (derate 7.5mW/°C above +70°C)...............470mW
CERDIP (derate 10.0mW/°C above +70°C.................. 900mW
Operating Temperature Ranges
MAX39_C_ _ .......................................................0°C to +70°C
MAX39_E_ _.....................................................-40°C to +85°C
MAX39_MJE ..................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
VCOM = ±4.5V,
VNO = 4.5V,
V+ = 5.5V, V- = -5.5V
VCOM = ±4.5V,
VNO = 4.5V,
V+ = 5.5V, V- = -5.5V
CONDITIONS
-10 +10
ICOM(OFF)
COM Off-Leakage Current
(Note 6)
-1.5 +1.5
-0.1 +0.1
-20 +20
-2.5 +2.5
nA
-0.2 +0.2
Ω
60 100
VV- V+VCOM, VNO
Analog Signal Range
-10 +10
INO(OFF)
NO Off-Leakage Current
(Note 6) -1.0 +1.0 nA
-0.1 +0.1
14
RFLAT(ON)
On-Resistance Flatness
(Note 5)
125
RON
Channel On-Resistance
Ω
6
8
ΔRON
RON Matching Between
Channels (Note 4)
Ω
11
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
TA= TMIN
to TMAX
TA= TMIN
to TMAX
TA= TMIN
to TMAX
MAX399
VNO = ±4.5V, VCOM = 4.5V,
V+ = 5.5V, V- = -5.5V
MAX398
INO = 1mA, VCOM = ±3V,
V+ = 5V, V- = -5V
INO = 1mA, VCOM = ±3.5V
INO = 1mA, VCOM = ±3.5V,
V+ = 5V, V- = -5V
TA= +25°C
(Note 3)
M
C, E
M
C, E
TA= +25°C
M
TA= +25°C
TA= TMIN to TMAX
TA= TMIN to TMAX
TA= +25°C
TA= TMIN to TMAX
C, E
TA= +25°C
TA= +25°C
Note 1: Signals on any terminal exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings.
VCOM = ±4.5V,
VNO = ±4.5V
-20 +20
ICOM(ON)
COM On-Leakage Current
(Note 6)
-2.5 +2.5
-0.2 +0.2
-40 +40
-5 +5
nA
-0.4 +0.4
TA= TMIN
to TMAX
TA= TMIN
to TMAX
MAX399
MAX398
M
C, E
TA= +25°C
M
C, E
TA= +25°C
±
±
±
SWITCH
VEN = VA= 0V/V+,
V+ = 5.5V, V- = -5.5V
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
_______________________________________________________________________________________ 3
f = 1MHz,
VEN = VD= 0V
f = 1MHz,
VEN = VD= 0V
CONDITIONS
34
CCOM(ON)
COM On-Capacitance pF
54
20
CCOM(OFF)
COM Off-Capacitance pF
40
pF11CNO(OFF)
NO Off-Capacitance
pF8CIN
Logic Input Capacitance
dB-92VCT
Crosstalk Between Channels
dB-75Off-Isolation (Note 7)
pC25QCharge Injection (Note 3)
ns
250
tON(EN)
Enable Turn-On Time 60 150
V2.4VAH, VENH
Logic-High Input Voltage
ns040tOPEN
Break-Before-Make Interval
ns150tTRANS
Transition Time
-1 +1
IGND
Ground Current
V±3 ±8Power-Supply Range
µA-1 +1I+Positive Supply Current
µA-1 +1I-Negative Supply Current
µA
-1 +1
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
MAX399
MAX398
MAX399
MAX398
f = 1MHz, VEN = VD= 0V
f = 1MHz
VEN = 2.4V, f = 100kHz,
VGEN = 1VP-P, RL= 1kΩ
Figure 4
Figure 2
VEN = 0, RL= 1kΩ, f = 100kHz
CL= 10nF, VS= 0, RS= 0Ω
VEN = VA= 0V/V+,
V+ = 5.5V, V- = -5.5V
Figure 3
TA= +25°C
TA= +25°C
TA= +25°C
TA= +25°C
TA= +25°C
TA= +25°C
TA= +25°C
TA= +25°C
TA= TMIN to TMAX
TA= +25°C
TA= TMIN to TMAX
TA= TMIN to TMAX
TA= +25°C
TA= +25°C
ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)
(V+ = +5V ±10%, V- = -5V ±10%, GND = 0, VAH = VENH = +2.4V, VAL = VENL = +0.8V, TA= TMIN to TMAX, unless otherwise noted.)
V0.8VAL, VENL
Logic-Low Input Voltage TA= TMIN to TMAX
TA= TMIN to TMAX
µAVA= VEN = 0.8V
VA= VEN = 2.4V µA-0.1 +0.1IAH, IENH
Input Current with
Input-Voltage High
-0.1 +0.1IAL, IENL
Input Current with
Input-Voltage Low
VEN = VA= 0V/V+,
V+ = 5.5V, V- = -5.5V
ns
200
tOFF(EN)
Enable Turn-Off Time 40 150
Figure 3 TA= TMIN to TMAX
TA= +25°C
DIGITAL LOGIC INPUT
SUPPLY
DYNAMIC
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
4 _______________________________________________________________________________________
VCOM = 4.5V,
VNO = 4.5V,
V+ = 5.5V
-20 +20
ICOM(ON)
COM On-Leakage Current
(Note 8)
-2.5 +2.5
-0.2 +0.2
-40 +40
-5 +5
nA
VCOM = 4.5V,
VNO = 0,
V+ = 5.5V
-0.4 +0.4
TA= TMIN
to TMAX
TA= TMIN
to TMAX
MAX399
VCOM = 4.5V,
VNO = 0,
V+ = 5.5V
MAX398
M
C, E
TA= +25°C
M
C, E
TA= +25°C
CONDITIONS
-10 +10
ICOM(OFF)
COM Off-Leakage Current
(Note 8)
-1.5 +1.5
-0.1 +0.1
-20 +20
-2.5 +2.5
nA
-0.2 +0.2
Ω
150 225
VV- V+VCOM, VNO
Analog Signal Range
-10 +10
INO(OFF)
NO Off-Leakage Current
(Note 8) -1.0 +1.0 nA
-0.1 +0.1
15 22
RFLAT
On-Resistance Flatness
280
RON
On-Resistance
Ω
11
13
ΔRON
RON Matching Between
Channels (Note 4)
Ω
10 18
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
TA= TMIN
to TMAX
TA= TMIN
to TMAX
TA= TMIN
to TMAX
MAX399
VNO = 4.5V, VCOM = 0,
V+ = 5.5V
MAX398
INO = 1mA; VCOM = 3V, 2V, 1V;
V+ = 5V
INO = 1mA, VCOM = 3.5V,
V+ = 4.5V
INO = 1mA, VCOM = 3.5V,
V+ = 4.5V
TA= +25°C
(Note 3)
M
C, E
M
C, E
TA= +25°C
M
TA= +25°C
TA= TMIN to TMAX
TA= TMIN to TMAX
TA= +25°C
TA= TMIN to TMAX
C, E
TA= +25°C
TA= +25°C
VTA= TMIN to TMAX
TA= TMIN to TMAX
µA
VA= 0
VEN = 0.8V
VA= VEN = 2.4V µA-0.1 +0.1IAH, IENH
V2.4VAH, VENH
Logic-High Input Voltage
-1.0 +1.0
IGND
IGND Supply Current
V315Power-Supply Range
µA-1.0 +1.0I+Positive Supply Current
µA-1.0 +1.0I-Negative Supply Current
µA
-1.0 +1.0
Input Current with
Input-Voltage High
-0.1 +0.1
0.8VAL, VENL
Logic-Low Input Voltage
IAL, IENL
Input Current with
Input-Voltage Low
VEN = V+, 0; VA= 0;
V+ = 5.5V; V- = 0 TA= TMIN to TMAX
VEN = VA= 0, V+; V+ = 5.5V; V- = 0
VEN = VA= 0V, V+; V+ = 5.5V; V- = 0
TA= +25°C
ELECTRICAL CHARACTERISTICS—Single +5V
(V+ = 5V ±10%, V- = 0, GND = 0, VAH = VENH = +2.4V, VAL = VENL = +0.8V, TA= TMIN to TMAX, unless otherwise noted.)
SWITCH
DIGITAL LOGIC INPUT
SUPPLY
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
_______________________________________________________________________________________ 5
Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in
this data sheet.
Note 3: Guaranteed by design.
Note 4: ΔRON = RONMAX - RONMIN.
Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal ranges, i.e., VNO = 3V to 0 and 0 to -3V.
Note 6: Leakage parameters are 100% tested at maximum rated hot operating temperature, and guaranteed by correlation at +25°C.
Note 7: Worst-case isolation is on channel 4 because of its proximity to the COM pin. Off-isolation = 20log VCOM / VNO, VCOM = output,
VNO = input to off switch.
Note 8: Leakage testing at single supply is guaranteed by correlation testing with dual supplies.
ns
CONDITIONS
275
tON(EN)
Enable Turn-On Time
pC1.5 5QCharge Injection (Note 3)
tOPEN
Break-Before-Make Interval
ns90 245tTRANS
Transition Time
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
90 200
TA= TMIN to TMAX
TA= +25°C
CL= 10nF, VS= 0, RS= 0Ω
TA= +25°C
VNO = 3V
TA= +25°C
ELECTRICAL CHARACTERISTICS—Single +5V (continued)
(V+ = 5V ±10%, V- = 0, GND = 0, VAH = VENH = +2.4V, VAL = VENL = +0.8V, TA= TMIN to TMAX, unless otherwise noted.)
ELECTRICAL CHARACTERISTICS—Single +3V
(V+ = 3V ±10%, V- = 0, GND = 0, VAH = VENH = +2.4V, VAL = VENL = +0.8V, TA= TMIN to TMAX, unless otherwise noted.)
ns
CONDITIONS
Enable Turn-Off Time (Note 3)
pC15QCharge Injection (Note 3)
230 375
VV- V+VANALOG
Analog Signal Range
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
Figure 3, VINH = 2.4V,
VINL = 0, VN01 = 1.5V
CL= 10nF, VS= 0, RS= 0Ω
TA= +25°C
(Note 3)
TA= +25°C
Ω
425
RON
On-Resistance INO = 1mA, VCOM = 1.5V,
V+ = 3V TA= TMIN to TMAX
ns230 575tTRANS
Transition Time (Note 3) Figure 2, VIN = 2.4V,
VN01 = 1.5V, VN08 = 0 TA= +25°C
75 400tOFF(EN) TA= +25°C
ns200 500tON(EN)
Enable Turn-On Time (Note 3) Figure 3, VINH = 2.4V,
VINL = 0, VN01 = 1.5V TA= +25°C
SWITCH
DYNAMIC
ns10 40
ns
200
tOFF(EN)
Enable Turn-Off Time 50 125
TA= TMIN to TMAX
TA= +25°C
DYNAMIC
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
6 _______________________________________________________________________________________
__________________________________________Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
110
30
-5 -3 1
ON-RESISTANCE vs. VCOM
(DUAL SUPPLIES)
50
90
MAX398/9 toc01
VCOM (V)
RON (Ω)
-1 3
70
100
40
80
60
5-4 0-2 2 4
V± = ±5V
V± = ±3V
110
30
-5 -3 1
ON-RESISTANCE vs. VCOM
AND TEMPERATURE
(DUAL SUPPLIES)
50
90
MAX398/9 toc02
VCOM (V)
RON (Ω)
-1 3
70
100
40
80
60
5-4 0-2 2 4
V+ = 5V
V- = -5V
TA = +125°C
TA = +85°C
TA = +25°C
TA = -55°C
300
50
02
ON-RESISTANCE vs. VCOM
(SINGLE SUPPLY)
100
200
MAX398/9 toc03
VCOM (V)
RON (Ω)
4
150
250
275
225
75
175
125
153
V+ = 3V
V- = 0V
V+ = 5V
180
02
ON-RESISTANCE vs. VCOM
AND TEMPERATURE
(SINGLE SUPPLY)
100
MAX398/9 toc04
VCOM (V)
RON (Ω)
4
60
140
160
120
80
40
153
TA = +25°C
TA = -55°C
TA = +85°C
TA = +125°C
V+ = 5V
V- = 0V
-5 -3 1
CHARGE INJECTION vs. VCOM
-5
5
MAX398/9 toc07
VCOM (V)
Qj (pC)
-1 3
0
5-4 0-2 2 4
V+ = 5V
V- = -5V
V+ = 5V
V- = 0V
0.1
SUPPLY CURRENT
vs. TEMPERATURE
10
MAX398/9 toc08
TEMPERATURE (°C)
I+, I- (nA)
1
-50 12525-25 0 7550 100
V+ = 5V
V- = -5V
VEN = VA = 0V, 5V
I+
I-
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
_______________________________________________________________________________________ 7
Pin Description
PIN
MAX398 MAX399
QSOP/DIP/
SO QFN
QSOP/DIP/
SO QFN
NAME FUNCTION
1, 15, 16
15, 14, 13
A0, A2, A1 Address Inputs
1, 16 15, 14 A0, A1 Address Inputs
2 16 2 16 EN Enable
3 1 3 1 V- Negative-Supply Voltage Input
4–7 2–5 N01–N04 Analog Inputs—Bidirectional
4–7 2–5 N01A–N04A Analog Inputs—Bidirectional
8 6 COM Analog Output—Bidirectional
8, 9 6, 7
COMA, COMB
Analog Outputs—Bidirectional
9–12 7–10 N08–N05 Analog Inputs—Bidirectional
10–13 8–11 N04B–N01B Analog Inputs—Bidirectional
13 11 14 12 V+ Positive-Supply Voltage Input
14 12 15 13 GND Ground
EP EP EP Exposed Pad. Connect to V+.
MAX398/MAX399
Applications Information
Operation with Supply Voltages
Other than ±5V
Using supply voltages less than ±5V reduces the analog
signal range. The MAX398/MAX399 muxes operate with
±3V to ±8V bipolar supplies or with a +3V to +15V single
supply. Connect V- to GND when operating with a single
supply. Both device types can also operate with unbal-
anced supplies, such as +10V and -5V. The Typical
Operating Characteristics graphs show typical on-resis-
tance with ±3V, ±5V, +3V, and +5V supplies. (Switching
times increase by a factor of two or more for operation at
+5V.)
Overvoltage Protection
Proper power-supply sequencing is recommended for
all CMOS devices. Do not exceed the absolute maxi-
mum ratings, because stresses beyond the listed rat-
ings can cause permanent damage to the devices.
Always sequence V+ on first, then V-, followed by the
logic inputs, NO, or COM. If power-supply sequencing
is not possible, add two small signal diodes (D1, D2) in
series with supply pins for overvoltage protection
(Figure 1). Adding diodes reduces the analog signal
range to one diode drop below V+ and one diode drop
above V-, but does not affect the devices’ low switch
resistance and low leakage characteristics. Device
operation is unchanged, and the difference between
V+ and V- should not exceed 17V. These protection
diodes are not recommended when using a single supply.
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
8 _______________________________________________________________________________________
Test Circuits/Timing Diagrams
COM
V-
V+
NO
* INTERNAL PROTECTION DIODES
D2
D1
-5V
+5V
MAX398
MAX399
*
*
*
*
Figure 1. Overvoltage Protection Using External Blocking Diodes
50%
tTRANS
tR < 20ns
tF < 20ns
VOUT
+3V
0
VNO1
0
VNO8
LOGIC
INPUT
VEN
SWITCH
OUTPUT
+5V
VOUT
-5V
GND
V+
A1
V-
A2
A0
EN
NO1
NO2–NO7
NO8
COM
+5V
-5V
50Ω
MAX398
300Ω
35pF
+5V
VOUT
-5V
GND
V+
A0
V-
A1
EN
NO1B
NO1A–NO4A
NO4B
COMB
+5V
50Ω
MAX399
300Ω35pF
90%
90%
tTRANS
ON
-5V
VEN
VEN
Figure 2. Transition Time
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
_______________________________________________________________________________________ 9
50%
tOFF(EN)
tR < 20ns
tF < 20ns
+3V
0
0
LOGIC
INPUT
VEN
SWITCH
OUTPUT
VOUT
+5V
VOUT
-5V
GND
V+
A1
V-
A0
A2
EN NO1
NO2–NO8
COM
+5V
50Ω
MAX398
1kΩ35pF
90%
10%
tON(EN)
+5V
VOUT
-5V
GND
V+
A1
V-
A0
EN NO1B
NO1A–NO4A
NO2B–NO4B,
COMA
COMB
+5V
50Ω
MAX399
1kΩ35pF
VEN
VEN
Figure 3. Enable Switching Time
50%
tOPEN
tR < 20ns
tF < 20ns
+5V
+3V
0
LOGIC
INPUT
VA
SWITCH
OUTPUT
VOUT
+5V
VOUT
-5V
GND
V+
A0
V-
A1
A2
EN
NO1–NO8
COM
+5V
50Ω
MAX398
300Ω
35pF
80%
+2.4V
0
VA
VEN
Test Circuits/Timing Diagrams (continued)
Figure 4. Break-Before-Make Interval
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
10 ______________________________________________________________________________________
ΔVOUT
+3V
0
LOGIC
INPUT
VEN
+5V
VOUT
-5V
GND
V+
A1
V-
A0
A2
EN
COM
MAX398
CL = 1000nF
VOUT
NO
CHANNEL
SELECT
RS
VS
ONOFF OFF
ΔVOUT IS THE MEASURED VOLTAGE DUE TO CHARGE TRANSFER
ERROR Q WHEN THE CHANNEL TURNS OFF.
Q = ΔVOUT x CL
VEN
Figure 5. Charge Injection
Test Circuits/Timing Diagrams (continued)
+5V
VOUT
-5V
GND
V+
A1
V-
A0
A2
NO8
COM
MAX398
NO1
RS = 50Ω
VIN
EN
10nF
RL = 1kΩ
OFF-ISOLATION = 20log VOUT
VIN
10nF
+5V
VOUT
-5V
GND
V+
A1
V-
A0
A2
NO8
COM
MAX398
NO2
RG = 50Ω
VIN
EN
10nF
RL = 1kΩ
CROSSTALK = 20log VOUT
VIN
10nF
NO1
R = 1kΩ
+5V
-5V
GND
V+
A2
V-
A1
A0
NO8
MAX398
CHANNEL
SELECT
NO1
COM
EN
1MHz
CAPACITANCE
ANALYZER
f = 1MHz
Figure 6. Off-Isolation Figure 7. Crosstalk
Figure 8. NO/COM Capacitance
DECODERS / DRIVERS
COM
NO1
NO2
NO3
NO4
NO5
NO6
NO7
NO8
A0 A1 A2 EN
V+ V- GND
MAX398
DECODERS / DRIVERS
COMA
NO1A
NO2A
NO3A
NO4A
A0 A1 EN
V+ V- GND
MAX399
COMB
NO1B
NO2B
NO3B
NO4B
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
______________________________________________________________________________________ 11
Functional Diagrams/Truth Tables
A2 A1 A0 EN ON SWITCH
X
0
0
0
0
1
1
1
1
X
0
0
1
1
0
0
1
1
X
0
1
0
1
0
1
0
1
0
1
1
1
1
1
1
1
1
NONE
1
2
3
4
5
6
7
8
A1 A0 EN ON SWITCH
X
0
0
1
1
X
0
1
0
1
0
1
1
1
1
NONE
1
2
3
4
LOGIC "O" VAL +0.8 V, LOGIC "1" VAH +2.4 V
MAX398 MAX399
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
12 ______________________________________________________________________________________
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
Ordering Information (continued)
*EP = Exposed pad.
**Contact factory for dice specifications.
Chip Topographies
V+
NO3
NO4
EN
0.102"
(2.59mm)
0.080"
(2.03mm)
COM NO8
NO5
NO6
NO7
N.C.
A0 A1 A2 GND
NO2
NO1
V-
MAX398
V+
NO3A
NO4A
EN
0.102"
(2.59mm)
0.080"
(2.03mm)
COMA COMB
NO1B
NO2B
NO4B
NO3B
A0 A1 N.C. GND
NO2A
NO1A
V-
MAX399
TRANSISTOR COUNT: 161
SUBSTRATE CONNECTED TO V+
TRANSISTOR COUNT: 161
SUBSTRATE CONNECTED TO V+
MAX398/MAX399
PART TEMP RANGE PIN-
PACKAGE
PKG
CODE
MAX399CGE 0°C to +70°C 16 QFN-EP* G1655-3
MAX399CEE 0°C to +70°C 16 QSOP E16-1
MAX399CSE 0°C to +70°C16 Narrow S16-1
MAX399CPE 0°C to +70°C16 Plastic P16-1
MAX399C/D 0°C to +70°C Dice**
MAX399EGE -40°C to + 85°C 16 QFN-EP* G1655-3
MAX399EEE -40°C to + 85°C 16 QSOP E16-1
MAX399ESE -40°C to + 85°C16 Narrow S16-1
MAX399EPE -40°C to + 85°C16 Plastic P16-1
MAX399EJE -40°C to + 85°C 16 CERDIP J16-1
MAX399MJE -55°C to +125°C 16 CERDIP J16-1
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
______________________________________________________________________________________ 13
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
32L QFN.EPS
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
14 ______________________________________________________________________________________
MAX398/MAX399
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
QSOP.EPS
F
1
1
21-0055
PACKAGE OUTLINE, QSOP .150", .025" LEAD PITCH
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
SOICN .EPS
PACKAGE OUTLINE, .150" SOIC
1
1
21-0041 B
REV.DOCUMENT CONTROL NO.APPROVAL
PROPRIETARY INFORMATION
TITLE:
TOP VIEW
FRONT VIEW
MAX
0.010
0.069
0.019
0.157
0.010
INCHES
0.150
0.007
E
C
DIM
0.014
0.004
B
A1
MIN
0.053A
0.19
3.80 4.00
0.25
MILLIMETERS
0.10
0.35
1.35
MIN
0.49
0.25
MAX
1.75
0.050
0.016L0.40 1.27
0.3940.386D
D
MINDIM
D
INCHES
MAX
9.80 10.00
MILLIMETERS
MIN MAX
16 AC
0.337 0.344 AB8.758.55 14
0.189 0.197 AA5.004.80 8
N MS012
N
SIDE VIEW
H 0.2440.228 5.80 6.20
e 0.050 BSC 1.27 BSC
C
HE
eBA1
A
D
0-8
L
1
VARIATIONS:
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
15 __________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 (408) 737-7600
© 2007 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.
Precision, 8-Channel/Dual 4-Channel,
Low-Voltage, CMOS Analog Multiplexers
MAX398/MAX399
Revision History
Pages changed at Rev 5: 1-5, 7, 9, 10, 12