Point of
Contact
.079[2.00]
Max. Insertion
Depth
.250[6.35]
.100[2.54]
.100[2.54]X No. of Spaces
.100
[2.54]
.100[2.54]
.040
[1.02] .100[2.54]
.040
[1.02] .100[2.54] .040
[1.02]
.040
[1.02] .100[2.54]
.200
[5.08]
.100[2.54]
.200
[5.08]
.200
[5.08]
Parts are subject to change without notice.
Products cut to specific sizes are uncancellable/ nonreturnable.
JUMP MIDDLE ROW
DOUBLE ROWSINGLE ROW
SCALE 4:1
Jump Middle Row
Jump
Triple Row
Double Row
Single Row
Middle
Row
- Leave blank if not needed
Current Rating: 3.0 Ampere
5oz.(1.39N) avg with .025(0.64mm) sq. pin
Withdrawal Force - Per Contact - H Plating:
Plating: Au or Sn over 50u" (1.27) Ni
Insulator Material:Nylon 6T
Contact Material: Phosphor Bronze
Materials:
Manual Solder: 350°C up to 5 secs.
Wave: 260°C up to 6 secs.
Process: 230°C up to 60 secs.
Peak: 260°C up to 20 secs.
Max. Process Temperature
Operation Temperature: -40°C to +105°C
Contact Resistance: 20M Ohms Max.
Dielectric Withstanding: 600V AC
Insulation Resistance: 1000M Ohms Min.
6oz.(1.67N) avg with .025(0.64mm) sq. pin
G. LF= Lead Free
Tails may be clipped to acheive specific dimensions.
- If required, specify position to be empty e.g .012 for pin 12
Row
Single
Row
Double
Row
Triple
Specifications:
Insertion Depth: .145(3.68) to .250(6.35)
Insertion Force - Per Contact - H Plating:
A. Pins Per Row
- 1 through 40
B. Row Specification
- S= Single Row
- D= Double Row
- J= Jump Row
- T= Triple Row
C. Pin Options
- See Pin Options below
D. Plating Options
- See Plating Options Below
E. Lock Tight "LT" (Optional)
- LT= Board locking feature. Leave blank if not needed.
F. Polarized Position
Recommended P.C. Board Layout
TRIPLE ROW
THE INFORMATION CONTAINED IN THIS
D
C
B
A
B
C
D
123
45678
8 7 6 5 432 1
E
F
E
F
SHEET 1 OF 1
01/20/15
01/20/15
GWE
EOW
B
UNLESS OTHERWISE SPECIFIED:
SCALE: 4:1
REV
DWG. NO.
C
SIZE
NAME DATECOMMENTS:
ADDRESS:
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
DRAWING IS THE SOLE PROPERTY OF
TOLERANCING PER:
APPLICATION
USED ONNEXT ASSY
PROPRIETARY AND CONFIDENTIAL
INTERPRET GEOMETRIC
Major League Electronics. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
Major League Electronics IS
SSHS-1 SERIES
PROHIBITED.
A
DO NOT SCALE DRAWING
TITLE:
DIMENSIONS ARE IN
INCHES
TOLERENCES:
ONE DECIMALS ±.100
TWO DECIMAL ±.100
THREE DECIMAL ±.005
FOUR DECIMAL ±.002
01 40
.100[2.54]X No. of Positions+.020[0.50]
.098[2.50] [8.51]
.335
.016[0.41]
x.024[0.60]
TAIL
LENGTH
APPLICATION
02
01
80
79
.197
[5.00]
120
01
03
119
.295
[7.50]
Pin 1
Pin 1
Pin 1
Pin 1
120
01
03
119
SSHS-1 XX - X - XX - XX - XX - XX - LF
(A) (B) (C ) (D) (E) (F) (G)
G -10µ Gold on Contact Area/ Flash on Tail
T -Matte Tin all Over
GT
-10
µ Gold on Contact Area/ Matte Tin on Tail
H
-30
µ Gold on Contact Area/ Matte Tin on Tail
F -Gold Flash over Entire Pin
FT - Gold Flash on Contact Area/ Matte Tin on Tail
Plating options
Length Tail Length
.435[11.05mm] .100[2.54mm] 02
.455[11.56mm] .120[3.05mm] 04
.525[13.34mm] .190[4.83mm] 06
.725[18.42mm] .390[9.91mm] 08
.895[22.73mm] .560[14.22mm] 10
Pin Options
BSTC TSHCR
BSTCM TSHCRE
BSTCR TSHCRSM
BSTCRSM TSHR
BSTS TSHRE
LBSTCM TSHS
LTSHCR TSHSCM
LTSHCRE TSHSM
LTSHR ULTSHSM
LTSHRE ULTSHC
LTSHSM ULTSHCR
TSHC
Mates With:
2533 Centennial Blvd.
Jeffersonville, In 47130
Phone: 812-670-4174
Fax: 812-670-4175
E-Mail: mle@mlelectronics.com
