Katalog D 074518 Ausgabe 3, 03/05 www.erni.com 1 Catalog E 074595 09/11 Edition 2
www.erni.com
IDG-B Enclosures
for Industrial and Building
Automation Controls
Catalog E 074595 09/11 Edition 2
www.erni.com
Catalog E 074595 09/11 Edition 2 www.erni.com 1
IDG-B Enclosures
Table of Contents
General ..............................................................................................2
Termination Options.....................................................................................3
Mounting Informations ................................................................................... 4
Assembly Area (Component Height Profile) ...................................................................5
Technical Data .........................................................................................6
Dimensional Drawings ...................................................................................7
IDG-B2 ..............................................................................................8
IDG-B4 ..............................................................................................9
IDG-B6 .............................................................................................10
IDG-B9 .............................................................................................11
Part Number Index ....................................................................................12
2 Catalog E 074595 09/11 Edition 2 www.erni.com
IDG-B Enclosures
General
IDG-B enclosures are manufactured completely from plastic material
and are therefore fully insulated. They fulfill the modular packaging
conditions required by existing standards like DIN 43880 (Built-in
equipment; overall dimensions and related mounting dimensions). The
enclosures have different installation widths ranging from 35 mm to
157 mm.
IDG-B enclosures are designed to snap onto a DIN-rail (EN50022)
with a clip, which is pre-assembled on the bottom of the base part.
The different versions of the top part allow the use of standard screw-
terminal -blocks. One version is suitable for print-terminal-blocks and
another version is able to adopt pluggable-terminal-blocks for which
pin headers are soldered onto the printed circuit board.
Custom designs concerning colors can also be offered. The upper
side of the top part can be modified with cut-outs for specific connec-
tors, light-guides for LEDs, displays, rotary switches etc..
The transparent front cover protects e.g. displays from being touched
and switches from accidental manipulation. Also a printed label can
be used behind the cover or the top part can be printed directly with
multiple colors.
Features:
• 4installationwidths: 35mmIDG-B2
70 mm IDG-B4
105 mm IDG-B6
157 mm IDG-B9
• OveralldimensionsperDIN43880,size1
• MountableonDINrailsacc.EN50022
• Variousterminationoptions:5.0/5.08mmterminalblocks
5.0/5.08 mm pluggable terminal blocks
Closed (without terminal blocks)
• Transparentfrontcoverprotectsdisplaysandcontroldevices
• DINrailclippre-assembledonbasepart
• Customdesignavailableuponrequest(MOQ)
Catalog E 074595 09/11 Edition 2 www.erni.com 3
IDG-B Enclosures
Termination Options
Top part for use with screw terminal blocks (5 mm / 5.08 mm pitch)
Top part for use with pluggable screw terminal blocks (5 mm / 5.08 mm pitch)
Closed top part for use without terminal blocks
This enclosure version has been desgined for use with standard pluggable
screw terminal blocks from different suppliers. The pluggable screw terminal
blocks are avoiding failures while termination or in case of service (replacement
of module). A pluggable system allows also pre-wiring of cabinets.
Maximum number of terminals
IDG-B2:10(5oneachside)
IDG-B4:24(12oneachside)
IDG-B6:36(18oneachside)
IDG-B9:52(26oneachside)
The using of terminal blocks is not possible with the closed top part.
Inadditionthereareoptionsconcerningallkindoftoppartsforcustomized
cut-outs made in the top area for connectors like D-Subs or other parts like
LEDs, rotary switches, fuse holders and so on.
This enclosure version is designed for use with standard terminal blocks from
different suppliers.
The discrete wires can be terminated or disconnected to the terminal blocks
due to an oval cut-out tin the top part.
Maximumnumberofterminals:
IDG-B2:10(5oneachside)
IDG-B4:24(12oneachside)
IDG-B6:36(18oneachside)
IDG-B9:52(26oneachside)
4 Catalog E 074595 09/11 Edition 2 www.erni.com
IDG-B Enclosures
Mounting Informations
Parts of a complete kit for use with pluggable screw terminal block
Parts of a complete kit for use with screw terminal block
Parts of a complete kit for use without screw terminal blocks (closed housing)
Front cover
Top part for pluggable screw terminal blocks
Base part with pre-assembled clip
Mounting screw
Wall mounting clips (optional)
Front cover
Top part for screw terminal blocks
Base part with pre-assembled clip
Mounting screw
Wall mounting clips (optional)
Front cover
Top part closed
Base part with pre-assembled clip
Mounting screw
Wall mounting clips (optional)
Catalog E 074595 09/11 Edition 2 www.erni.com 5
IDG-B Enclosures
Assembly Area (Component Height Profile)
IDG-B9 153,8
IDG-B6 101,8
IDG-B4 66
IDG-B2 31,5
A
A
1
41,6
1
Type
22,4
7,2
13,2
26,7
Additional PCBs Horizontal*
42,8
33,6
41,6
1
56,8
1
20
22
Standard Base PCB*
40
52
40
79
32
13
2,5
77,4
Additional PCBs Vertical*
PCB thickness
1.6 mm
PCB thickness
1.6 mm
PCB dimensions see page7.
assembly area (component height profile)
*Valuesforcomponentheightprofileareonlyarecommendationandhavetobeverifiedbythecustomer.Theremightbemoreor
less distance between PCB and parts required, depending on the specific application.
no components or
traces allowed
no components or
traces allowed
6 Catalog E 074595 09/11 Edition 2 www.erni.com
IDG-B Enclosures
Technical Data
IDG-B2 IDG-B4 IDG-B6 IDG-B9
Technical data
Outside dimensions in mm
(W x H x D)
35 x 86 x 60
70 x 86 x 60
105 x 86 x 60
157 x 86 x 60
PCB thickness recommended 1.6 mm
Wall mounting grid in mm 49 x 59.5 84 x 59.5 119 x 59.5 171.5 x 59.5
Number of terminals 10 24 36 52
Temperature range -40/100 °C
Air- and creepage distances depending on used screw terminal blocks
Operating voltage
The permissible operating voltages depend on the customer application and on the applicable or
specified safety requirements.
Insulation coordination according to IEC 60664-1 has to be regarded for the complete electrical
device. Therefore, the maximum creepage and clearance distances of the mated connectors are
specified for consideration as a part of the whole current path.
In practice, reductions in creepage or clearance distances may occur due to the conductive pat-
tern of the printed board or the wiring used, and have to be taken into account separately.
As a result the creepage and clearance distances for the application may be reduced compared
to those of the connector.
Protection class
EN 60529
IP20
DIN-rail mounting DIN EN50022
Tightening torque
(PCB mounting screw)
0.6 Nm
Tightening torque
(wall mounting screw)
0.8 Nm
Materials
Front Cover PC (color transparent)
Top part PC/UL94-V0(colorgrey,RAL7035)
Base part PPO/UL94-V0(colorblack,RAL7021)
UL (plastic material) E45329
Catalog E 074595 09/11 Edition 2 www.erni.com 7
IDG-B Enclosures
Dimensional Drawings
Base part
Top part
Snap-fit both sides
(push for releasing top part)
Front cover
49
29
43
86
58
46,1
60
5
60
IDG-B9
IDG-B6
IDG-B484 70 64,25055 (11x5)
IDG-B2
49 35 29,2 20,9 20 (4x5)
Type ABC±0,1D±0,1E
Wall mounting clip
B
59,5
A
3,7
DIN rail clip (pre-assembled)
Holes for pin headers (pluggable screw terminal blocks)
Holes for screw terminal blocks
50
0,1
1
,7
73,8 0,1
E
0,1
-
12
2,1
3
1,2
R
1
1
,6
(2x)
82 0,1
D
5
65,8
1,7-
C
1,6
with pin header (pluggable screw terminal blocks)
without terminal blocks (closed housing)
with screw terminal blocks
119 105998585 (17x5)
171,5157 151 137125 (25x5)
All dimensions in mm.
8 Catalog E 074595 09/11 Edition 2 www.erni.com
IDG-B Enclosures
IDG-B2
Configuration Width Color Part Number
Base part with pre-assembled clip 35 mm black 064236
Front cover 35 mm transparent 064095
Top part for pluggable screw terminal blocks 35 mm grey 064944
Order list for complete enclosure (pluggable screw terminal blocks)
Configuration Width Color Part Number
Base part with pre-assembled clip 35 mm black 064236
Front cover 35 mm transparent 064095
Top part for screw terminal blocks 35 mm grey 064093
Order list for complete enclosure (screw terminal blocks)
Configuration Width Color Part Number
Base part with pre-assembled clip 35 mm black 064236
Front cover 35 mm transparent 064095
Top part closed 35 mm grey 064945
Order list for complete enclosure (closed top part)
PCB header (5 mm pitch) on request
Pluggable screw terminal block (5 mm pitch) on request
Screw terminal block (5 mm pitch) on request
Configuration Part Number
Mounting screw (M 2.9 x 6.5 mm) 835702
Wall mounting clip 364909
Additional components
•Installationwidth35mm
•Numberofterminals10(5on each side)
•Easysnap-onassemblyontoDIN-rails
•Transparentfrontcoverprotectsdisplaysandcontroldevices
•Othercolorsandcustomdesignsonrequest
•Forusewith:
- standard pluggable terminal blocks
- standard screw terminal blocks
- without terminal blocks (closed housing)
Catalog E 074595 09/11 Edition 2 www.erni.com 9
IDG-B Enclosures
IDG-B4
•Installationwidth70mm
•Numberofterminals24(12oneachside)
•Easysnap-onassemblyontoDIN-rails
•Transparentfrontcoverprotectsdisplaysandcontroldevices
•Othercolorsandcustomdesignsonrequest
•Forusewith:
- standard pluggable terminal blocks
- standard screw terminal blocks
- without terminal blocks (closed housing)
Order list for complete enclosure (pluggable screw terminal blocks)
Configuration Width Color Part Number
Base part with pre-assembled clip 70 mm black 064237
Front cover 70 mm transparent 064068
Top part for pluggable screw terminal blocks 70 mm grey 064940
PCB header (5 mm pitch) on request
Pluggable screw terminal block (5 mm pitch) on request
Configuration Width Color Part Number
Base part with pre-assembled clip 70 mm black 064237
Front cover 70 mm transparent 064068
Top part for screw terminal blocks 70 mm grey 064074
Order list for complete enclosure (screw terminal blocks)
Screw terminal block (5 mm pitch) on request
Configuration Width Color Part Number
Base part with pre-assembled clip 70 mm black 064237
Front cover 70 mm transparent 064068
Top part closed 70 mm grey 064941
Order list for complete enclosure (closed top part)
Configuration Part Number
Mounting screw (M 2.9 x 6.5 mm) 835702
Wall mounting clip 364909
Additional components
10 Catalog E 074595 09/11 Edition 2 www.erni.com
IDG-B Enclosures
IDG-B6
•Installationwidth105mm
•Numberofterminals36(18oneachside)
•Easysnap-onassemblyontoDIN-rails
•Transparentfrontcoverprotectsdisplaysandcontroldevices
•Othercolorsandcustomdesignsonrequest
•Forusewith:
- standard pluggable terminal blocks
- standard screw terminal blocks
- without terminal blocks (closed housing)
Order list for complete enclosure (pluggable screw terminal blocks)
Configuration Width Color Part Number
Base part with pre-assembled clip 105 mm black 104404
Front cover 105 mm transparent 104402
Top part for pluggable screw terminal blocks 105 mm grey 104406
PCB header (5 mm pitch) on request
Pluggable screw terminal block (5 mm pitch) on request
Configuration Width Color Part Number
Base part with pre-assembled clip 105 mm black 104404
Front cover 105 mm transparent 104402
Top part for screw terminal blocks 105 mm grey 104405
Order list for complete enclosure (screw terminal blocks)
Screw terminal block (5 mm pitch) on request
Configuration Width Color Part Number
Base part with pre-assembled clip 105 mm black 104404
Front cover 105 mm transparent 104402
Top part closed 105 mm grey 104407
Order list for complete enclosure (closed top part)
Configuration Part Number
Mounting screw (M 2.9 x 6.5 mm) 835702
Wall mounting clip 364909
Additional components
Catalog E 074595 09/11 Edition 2 www.erni.com 11
IDG-B Enclosures
IDG-B9
•Installationwidth157mm
•Numberofterminals52(26oneachside)
•Easysnap-onassemblyontoDIN-rails
•Transparentfrontcoverprotectsdisplaysandcontroldevices
•Othercolorsandcustomdesignsonrequest
•Forusewith:
- standard pluggable terminal blocks
- standard screw terminal blocks
- without terminal blocks (closed housing)
Order list for complete enclosure (pluggable screw terminal blocks)
Configuration Width Color Part Number
Base part with pre-assembled clip 157 mm black 104396
Front cover 157 mm transparent 104394
Top part for pluggable screw terminal blocks 157 mm grey 104398
PCB header (5 mm pitch) on request
Pluggable screw terminal block (5 mm pitch) on request
Configuration Width Color Part Number
Base part with pre-assembled clip 157 mm black 104396
Front cover 157 mm transparent 104394
Top part for screw terminal blocks 157 mm grey 104397
Order list for complete enclosure (screw terminal blocks)
Screw terminal block (5 mm pitch) on request
Configuration Width Color Part Number
Base part with pre-assembled clip 157 mm black 104396
Front cover 157 mm transparent 104394
Top part closed 157 mm grey 104399
Order list for complete enclosure (closed top part)
Configuration Part Number
Mounting screw (M 2.9 x 6.5 mm) 835702
Wall mounting clip 364909
Additional components
12 Catalog E 074595 09/11 Edition 2 www.erni.com
IDG-B Enclosures
Part Number Index
064068 ......................................9
064074 ......................................9
064093 ......................................8
064095 ......................................8
064236 ......................................8
064237 ......................................9
064940 ......................................9
064941 ......................................9
064944 ......................................8
064945 ......................................8
104394 .....................................11
104396 .....................................11
104397 .....................................11
104398 .....................................11
104399 .....................................11
104402 .....................................10
104404 .....................................10
104405 .....................................10
104406 .....................................10
104407 .....................................10
364909 ..............................8, 9, 10, 11
835702 ..............................8, 9, 10, 11
Part Number Page
Katalog D 074518 Ausgabe 3, 03/05 www.erni.com 13 Catalog E 074595 09/11 Edition 2
www.erni.com
Member
14 Katalog D 074518 Ausgabe 3, 03/05 www.erni.com14 Katalog D 074518 Ausgabe 3, 03/05 www.erni.com Catalog E 074595 09/11 Edition 2
ERNI Electronics GmbH Europe South America Africa Japan
Seestrasse 9
73099 Adelberg/Germany
Tel +49 7166 50-0
Fax +49 7166 50-282
info@erni.de
ERNI Electronics, Inc. North America Canada Mexico
2201 Westwood Ave
Richmond,VA23230/USA
Tel +1 804 228-4100
Fax +1 804 228-4099
info.usa@erni.com
ERNI Asia Holding Pte Ltd. Asia
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625
Tel +65 6 555 5885
Fax +65 6 555 5995
info@erni-asia.com
www.erni.com
©ERNIElectronicsGmbH2011•PrintedinGermany.Apolicyofcontinuousimprovementisfollowedandtherighttoalteranypublisheddatawithoutnoticeisreserved.ERNI®
,
MicroStac®
, MicroSpeed®
, MiniBridge®
, MaxiBridge®
,ERmet®
,ERmetZD®
,ERbic®andERNIPRESS®aretrademarks(registeredorappliedforinvariouscountries)ofERNIElec-
tronics GmbH.