8752CYI www.idt.com REV. C JULY 30, 2010
1
ICS8752I
LOW SKEW, 1-TO-8
LVCMOS CLOCK MULTIPLIER/ZERO DELAY BUFFER
BLOCK DIAGRAM PIN ASSIGNMENT
32 31 30 29 28 27 26 25
9 10 11 12 13 14 15 16
1
2
3
4
5
6
7
8
24
23
22
21
20
19
18
17
GND
QB1
QB0
VDDO
VDDO
QA3
QA2
GND
DIV_SELB0
DIV_SELB1
DIV_SELA0
DIV_SELA1
MR/nOE
CLK0
GND
FB_IN
VDDO
QA1
QA0
GND
CLK1
VDD
VDDA
CLK_SEL
VDDO
QB2
QB3
GND
GND
nc
PLL_SEL
VDD
ICS8752I
32-Lead LQFP
7mm x 7mm x 1.4mm package body
Y package
Top View
÷2
÷4
÷6
÷8
÷12
PLL
PHASE
DETECTOR
PLL_SEL
FB_IN
CLK0
CLK1
CLK_SEL
DIV_SELA1
DIV_SELA0
DIV_SELB1
DIV_SELB0
MR/nOE
QA0
QA1
QA2
QA3
QB0
QB1
QB2
QB3
0
1
1
0
00
01
10
11
00
01
10
11
VCO
GENERAL DESCRIPTION
The ICS8752I is a low voltage, low skew LVCMOS clock
generator. With output up to 240MHz, the ICS8752I is
targeted for high performance clock applications. Along with
a fully integrated PLL, the ICS8752I contains frequency
configurable outputs and an external feedback input for
regenerating clocks with “zero delay”.
Dual clock inputs, CLK0 and CLK1, support redundant clock
applications. The CLK_SEL input determines which reference
clock is used. The output divider values of Bank A and B are
controlled by the DIV_SELA0:1, and DIV_SELB0:1, respectively.
For test and system debug purposes, the PLL_SEL input
allows the PLL to be bypassed. When HIGH, the MR/nOE
input resets the internal dividers and forces the outputs to
the high impedance state.
The low impedance LVCMOS outputs of the ICS8752I are
designed to drive terminated transmission lines. The
effective fanout of each output can be doubled by
utilizing the ability of each output to drive two series
terminated transmission lines.
FEATURES
•Fully integrated PLL
•8 LVCMOS outputs, 7Ω typical output impedance
•Selectable LVCMOS CLK0 or CLK1 inputs for
redundant clock applications
•Input/Output frequency range: 18.33MHz to 240MHz
at VCC = 3.3V ± 5%
•VCO range: 220MHz to 480MHz
•External feedback for “zero delay” clock regeneration
•Cycle-to-cycle jitter: 75ps (maximum),
(all outputs are the same frequency)
•Output skew: 100ps (maximum)
•Bank skew: 55ps (maximum)
•Full 3.3V or 2.5V supply voltage
•-40°C to 85°C ambient operating temperature
•Lead-Free package fully RoHS compliant