Back G3MB Solid-state Relay Low-cost, Subminiature PCB-mounting SSR Switching 2 A Bottom is approximately three times as small as that of the G3M and ideal for high-density PCB applications. DC input-AC output for 2-A load at 25%C. Mono-block lead frame incorporating terminals, heat sink, and a PCB directly mounted with bare chips made it possible to miniaturize the relay. Ordering Information Model Number Legend: G3MB 1 2 3 4 3. Terminal P: PCB terminal 4. Zero Cross Function None: With zero cross function L: Without zero cross function 1. Load Supply Voltage 1: Between 100 and less than 200 VAC 2: Between 200 and less than 300 VAC 2. Load Current 02: 2 A Isolation Phototriac Zero cross function No Indicator No Snubber circuit Yes Applicable output load 2 A at 100 to 120 VAC Rated input voltage 5 VDC (rated load voltage) 12 VDC Model G3MB-102PL 24 VDC Yes 2 A at 100 to 240 VAC 5 VDC (rated load voltage) 12 VDC G3MB-202P 24 VDC No 5 VDC G3MB-202PL 12 VDC 24 VDC Specifications Ratings Input Rated voltage Operating voltage Impedance Voltage levels Must operate voltage 5 VDC 4 to 6 VDC 440 W +20% 4 VDC max. 12 VDC 9.6 to 14.4 VDC 1 kW +20% 9.6 VDC max. 24 VDC 19.2 to 28.8 VDC 2.2 kW +20% 19.2 VDC max. Note: Must dropout voltage 1 VDC min. Each model has 5-VDC, 12-VDC, and 24-VDC input versions. Output Model Applicable load Rated load voltage Load voltage range G3MB-102PL 100 to 120 VAC, 50/60 Hz 75 to 132 VAC, 50/60 Hz G3MB-202P G3MB-202PL 100 to 240 VAC, 50/60 Hz 75 to 264 VAC, 50/60 Hz 54 Load current 0.1 to 2 A Inrush curret 30 A (60 Hz, 1 cycle)