Preliminary Datasheet CR05AS-8 R07DS0135EJ0500 (Previous: REJ03G0348-0400) Rev.5.00 Sep 15, 2010 Thyristor Low Power Use Features Non-Insulated Type Planar Passivation Type Surface Mounted type IT (AV) : 0.5 A VDRM : 400 V IGT : 100 A Outline RENESAS Package code: PLZZ0004CA-A (Package name: UPAK) 1 2 RENESAS Package code: de: PLZ LZZ0004CB-A (Package name: SOTOT-89)) OT-89 3 L O E G K P 4 4 2, 4 1 2 3 3 1. 2. 3. 4. Cathode Anode Gate Anode 1 Applications Solid state relay, strobe flasher, igniter, and hybrid IC Maximum Ratings Parameter Repetitive peak reverse voltage Non-repetitive peak reverse voltage DC reverse voltage Repetitive peak off-state voltageNote1 Note1 DC off-state voltage Parameter RMS on-state current Average on-state current Surge on-state current I2t for fusing VRRM VRSM VR (DC) VDRM VD (DC) Symbol IT (RMS) IT (AV) Ratings 0.79 0.5 Unit A A ITSM 10 A I2t 0.4 A2s Peak gate power dissipation PGM 0.1 Average gate power dissipation PG (AV) 0.01 Peak gate forward voltage VFGM 6 Peak gate reverse voltage VRGM 6 Peak gate forward current IFGM 0.1 Junction temperature Tj - 40 to +125 Storage temperature Tstg - 40 to +125 Mass -- 50 Notes: 1. With gate to cathode resistance RGK = 1 k. R07DS0135EJ0500 Rev.5.00 Sep 15, 2010 Voltage class 8 (Mark CD) 400 500 320 400 320 Symbol W W V V A C C mg Unit V V V V V Conditions Commercial frequency, sine half wave 180 conduction, Ta = 57CNote2 60Hz sine half wave 1 full cycle, peak value, non-repetitive Value corresponding to 1 cycle of half wave 60Hz, surge on-state current Typical value Page 1 of 8 CR05AS-8 Preliminary Electrical Characteristics Parameter Symbol Rated value Typ. Max. -- 0.1 -- 0.1 Unit Test conditions Repetitive peak reverse current Repetitive peak off-state current IRRM IDRM Min. -- -- On-state voltage VTM -- -- 1.9 V Ta = 25C, ITM = 1.5 A, instantaneous value Gate trigger voltage VGT -- -- 0.8 V Tj = 25C, VD = 6 V, Note4 IT = 0.1 A Gate non-trigger voltage VGD 0.2 -- -- V Tj = 125C, VD = 1/2 VDRM, RGK = 1 k Gate trigger current IGT 20 -- 100Note3 A Tj = 25C, VD = 6 V, Note4 IT = 0.1 A Holding current IH -- -- 3 mA Rth (j-a) -- -- 70 C/W Tj = 25C, VD = 12 V, RGK = 1 k Junction to ambientNote2 Thermal resistance mA mA Tj = 125C, VRRM applied Tj = 125C, VDRM applied, RGK = 1 k Notes: 2. Soldering with ceramic plate (25 mm 25 mm t0.7 mm). 3. If special values of IGT are required, choose item E from those listed in the table below if possible. Item B E IGT (A) 20 to 50 20 to 100 The above values do not include the current flowing through the 1 k resistance between the gate and cathode. 4. IGT, VGT measurement circuit. A1 3V DC IGS IGT A3 A2 RGK 1 1k Switch 2 60 TUT V1 6V DC VGT Switch 1 : IGT measurement Switch 2 : VGT measurement (Inner resistance of voltage meter is about 1k) R07DS0135EJ0500 Rev.5.00 Sep 15, 2010 Page 2 of 8 CR05AS-8 Preliminary Performance Curves 102 7 Ta = 25C 5 3 2 Surge On-State Current (A) 10 101 7 5 3 2 100 7 5 3 2 1 2 3 4 5 Gate Voltage (V) 101 7 5 3 2 100 7 5 3 2 10-1 7 5 3 2 5 4 3 2 1 2 3 4 5 7 101 2 3 4 5 7 102 Gate Trigger Current vs. Junction Temperature VFGM = 6V PGM = 0.1W PG(AV) = 0.01W VGT = 0.8V IGT = 100A (Tj = 25C) VGD = 0.2V IFGM = 0.1A 103 7 5 3 2 Typical Example 102 7 5 3 2 101 7 5 3 2 100 -60 -40 -20 0 20 40 60 80 100 120 140 Gate Current (mA) Junction Temperature (C) Gate Trigger Voltage vs. Junction Temperature Maximum Transient Thermal Impedance Characteristics (Junction to ambient) 1.0 0.9 Gate Trigger Voltage (V) 6 Gate Characteristics 10-2 10-2 2 3 5 710-12 3 5 7 100 2 3 5 7 101 2 3 5 7 102 0.8 7 Conduction Time (Cycles at 60Hz) 102 7 5 3 2 8 On-State Voltage (V) x 100 (%) 0 9 0 100 Gate Trigger Current (Tj = tC) Gate Trigger Current (Tj = 25C) 10-1 Rated Surge On-State Current Distribution 0.7 Typical Example 0.6 0.5 0.4 0.3 0.2 0.1 0 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (C) R07DS0135EJ0500 Rev.5.00 Sep 15, 2010 Transient Thermal Impedance (C/W) On-State Current (A) Maximum On-State Characteristics 100 2 3 5 7 101 2 3 5 7 102 2 3 5 7 103 103 7 25x25xt0.7 5 Aluminum Board 3 2 102 7 5 3 2 101 7 5 3 2 100 10-3 2 3 5 710-2 2 3 5 710-1 2 3 5 7 100 Time (s) Page 3 of 8 CR05AS-8 Preliminary Allowable Ambient Temperature vs. Average On-State Current (Single-Phase Half Wave) Maximum Average Power Dissipation (Single-Phase Half Wave) 160 = 30 60 90 120 180 1.0 0.5 360 Resistive, inductive loads 0 0 Ambient Temperature (C) Average Power Dissipation (W) 1.5 25x25xt0.7 140 Aluminum Board 120 Resistive, inductive loads Natural convection 100 80 60 = 30 40 90 60 20 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 360 0 180 120 0.2 0.8 0.6 0.4 Average On-State Current (A) Average On-State Current (A) Maximum Average Power Dissipation (Single-Phase Full Wave) Allowable Ambient Temperature vs. Average On-State Current (Single-Phase Full Wave) 0.5 360 Ambient Temperature (C) 180 1.0 25x25xt0.7 140 Aluminum Board 360 120 Resistive loads Natural convection 100 80 60 40 60 = 30 20 120 90 180 Resistive loads 0 Average Power Dissipation (W) 90 = 30 60 120 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0 0.2 0.4 0.8 0.6 Average On-State Current (A) Average On-State Current (A) Maximum Average Power Dissipation (Rectangular Wave) Allowable Ambient Temperature vs. Average On-State Current (Rectangular Wave) 90 180 = 30 60 120 270 1.5 DC 1.0 0.5 360 0 0 Resistive, inductive loads 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Average On-State Current (A) R07DS0135EJ0500 Rev.5.00 Sep 15, 2010 160 Ambient Temperature (C) Average Power Dissipation (W) 160 1.5 25x25xt0.7 140 Aluminum Board 120 360 Resistive, inductive loads Natural convection 100 80 60 DC 40 = 30 60 20 0 120 90 0 0.2 0.4 270 180 0.6 0.8 Average On-State Current (A) Page 4 of 8 Preliminary Typical Example 140 120 100 RGK = 1k 80 60 40 20 0 -40 -20 0 20 40 60 80 100 120 140 160 Breakover Voltage (RGK = rk) Breakover Voltage (RGK = 1k) 160 Breakover Voltage vs. Gate to Cathode Resistance 120 Typical Example Tj = 125C 100 80 60 40 20 0 10-1 2 3 5 7100 2 3 5 7101 2 3 5 7 102 Junction Temperature (C) Gate to Cathode Resistance (k) Breakover Voltage vs. Rate of Rise of Off-State Voltage Holding Current vs. Junction Temperature 100 80 60 #2 40 #1 Typical Example 20 # 1 IGT(25C = 10A) # 2 IGT(25C = 66A) Tj = 125C, RGK = 1k 0 0 10 2 3 5 7101 2 3 5 7 102 2 3 5 7 10 3 Holding Current (mA) 120 102 7 5 3 2 101 7 5 3 2 Tj = 25C IH (25C) = 1mA IGT(25C) = 25A Distribution Typical Example 100 7 5 3 2 10-1 -60 -40 -20 0 20 40 60 80 100 120 140 Junction Temperature (C) Holding Current vs. Gate to Cathode Resistance Repetitive Peak Reverse Voltage vs. Junction Temperature 500 Typical Example IGT(25C) IH(1k) 13A 1.6mA #1 59A 1.8mA #2 400 #1 300 #2 200 100 Tj = 25C 0 10-1 2 3 5 7 100 2 3 5 7101 2 3 5 7102 Gate to Cathode Resistance (k) R07DS0135EJ0500 Rev.5.00 Sep 15, 2010 x 100 (%) Rate of Rise of Off-State Voltage (V/s) Repetitive Peak Reverse Voltage (Tj = tC) Repetitive Peak Reverse Voltage (Tj = 25C) Holding Current (RGK = rk) Holding Current (RGK = 1k) x 100 (%) Breakover Voltage (dv/dt = vV/s) Breakover Voltage (dv/dt = 1V/s) x 100 (%) Breakover Voltage (Tj = tC) Breakover Voltage (Tj = 25C) x 100 (%) Breakover Voltage vs. Junction Temperature x 100 (%) CR05AS-8 160 Typical Example 140 120 100 80 60 40 20 0 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (C) Page 5 of 8 CR05AS-8 Preliminary Gate Trigger Current (tw) Gate Trigger Current (DC) x 100 (%) Gate Trigger Current vs. Gate Current Pulse Width 103 7 5 4 3 2 #1 #2 Typical Example IGT(25C) #1 10A #2 66A 102 7 5 4 3 2 Tj = 25C 101 0 10 2 3 4 5 7 101 2 3 4 5 7 102 Gate Current Pulse Width (s) R07DS0135EJ0500 Rev.5.00 Sep 15, 2010 Page 6 of 8 CR05AS-8 Preliminary Package Dimensions Previous Code UPAK / UPAKV RENESAS Code PLZZ0004CA-A 4.5 0.1 1.5 1.5 3.0 Package Name SOT-89 JEITA Package Code SC-62 0.4 RENESAS Code PLZZ0004CB-A 0.44 Max Previous Code (0.2) 0.53 Max 0.48 Max (1.5) 2.5 0.1 4.25 Max 1 Unit: mm 1.5 0.1 0.44 Max 0.8 Min 1.8 Max MASS[Typ.] 0.050g (2.5) JEITA Package Code SC-62 (0.4) Package Name UPAK MASS[Typ.] 0.48g Unit: mm G K P L O E 4.6Max 1.5 0.1 4.2Ma Max 0.8Min n 2.5 5 0.1 1.6 0.2 0.58Max 1.5 3.0 R07DS0135EJ0500 Rev.5.00 Sep 15, 2010 +0.03 0.4 -0.05 0.48Max Page 7 of 8 CR05AS-8 Preliminary Order Code Lead form Surface-mounted type Standard packing Taping Quantity 4000 Standard order code Type name - ET +Direction (1 or 2) + 4 Standard order code example CR05AS-8-ET14 Note : Please confirm the specification about the shipping in detail. R07DS0135EJ0500 Rev.5.00 Sep 15, 2010 Page 8 of 8 Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 7F, No. 363 Fu Shing North Road Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632 Tel: +65-6213-0200, Fax: +65-6278-8001 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2010 Renesas Electronics Corporation. All rights reserved. Colophon 1.0