3.5x3.5 mm SMD CHIP LED LAMP ATTENTION Part Number: AA3535QR4A25Z4S-N1 OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Neutral White Features Descriptions z White SMD package, silicone resin. z The source color devices are made with InGaN on Al2O3 substrate Light Emitting Diode. z Low thermal resistance. z Compatible with IR-reflow processes. z Electrostatic discharge and power surge could damage the LEDs. z ESD protection. z It is recommended to use a wrist band or anti- z Package: 2000pcs / reel. z Moisture sensitivity level : level 2a. electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be z RoHS compliant electrically grounded. Applications z Signal and symbol luminaire for orientation. z Marker lights (e.g. steps, exit ways, etc). z Decorative and entertainment lighting. z Commercial and residential lighting. Package Dimensions z Automotive interior lighting. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAM3336 APPROVED: WYNEC REV NO: V.4B CHECKED: Allen Liu DATE: AUG/01/2014 DRAWN: Y.Liu PAGE: 1 OF 8 ERP: 1201008031 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. SPEC NO: DSAM3336 APPROVED: WYNEC REV NO: V.4B CHECKED: Allen Liu DATE: AUG/01/2014 DRAWN: Y.Liu PAGE: 2 OF 8 ERP: 1201008031 Selection Guide CCT Range (K) Color Part No. Neutral White v (lm) [2] @ 150mA* Viewing Angle [1] Lens Type Min. AA3535QR4A25Z4S-N1 Iv (cd) [2] @ 150mA CRI Typ. Max. 3710 4000 4260 Typ. 67 Water Clear Min. Typ. Min. Typ. 2 1/2 7 10 24 34 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%.*LEDs are binned according to their luminous flux. 3. Luminous intensity/ luminous Flux value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Symbol Value Unit Power Dissipation PD 600 mW Junction Temperature [1] TJ 110 C Operating Temperature Top -40 To +85 C Storage Temperature Tstg -40 To +85 C IF 150 mA Peak Forward Current [2] IFM 300 mA Reverse Voltage VR 5 V Thermal Resistance [1] (Junction/ambient) Rth j-a 180 C/W Thermal Resistance [1] (Junction/solder point) Rth j-S 85 C/W 8000 V DC Forward Current [1] Electrostatic Discharge Threshold (HBM) Notes: 1.Results from mounting on PC board FR4(pad size 70mm 2 ), mounted on pc board-metal core PCB is recommend for lowest thermal Resistance. 2.1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at TA=25C Parameter Symbol Forward Voltage IF = 150mA [Min.] Forward Voltage IF = 150mA [Typ.] Value Unit 2.7 VF [1] Forward Voltage IF = 150mA [Max.] 3.5 V 4.0 Allowable Reverse Current [Max.] IR 85 mA Temperature coefficient of VF IF=150mA, -10 C T100 C [Typ.] TCV -3.1 mV/ C Temperature coefficient of X IF=150mA, -10 C T100 C [Typ.] TCX -0.15 10-3/ C Temperature coefficient of Y IF=150mA, -10 C T100 C [Typ.] TCy -0.22 10-3/ C Note: 1.Forward Voltage: +/-0.1V. SPEC NO: DSAM3336 APPROVED: WYNEC REV NO: V.4B CHECKED: Allen Liu DATE: AUG/01/2014 DRAWN: Y.Liu PAGE: 3 OF 8 ERP: 1201008031 Wavelength Characteristics Ta = 25C 1.2 Relative intensity (a. u.) 1.0 0.8 0.6 0.4 0.2 0.0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) SPEC NO: DSAM3336 APPROVED: WYNEC REV NO: V.4B CHECKED: Allen Liu DATE: AUG/01/2014 DRAWN: Y.Liu PAGE: 4 OF 8 ERP: 1201008031 SPEC NO: DSAM3336 APPROVED: WYNEC REV NO: V.4B CHECKED: Allen Liu DATE: AUG/01/2014 DRAWN: Y.Liu PAGE: 5 OF 8 ERP: 1201008031 CCT 2500-7000 K Bin Code 0.44 3000 K 2500 K 4000 K 0.42 7 9 0.40 y 6000 K 19 21 7000 K 0.34 25 27 0.32 28 0.30 0.28 0.30 16 18 20 23 12 14 17 8 1 2 4 6 10 15 0.38 0.36 11 13 5000 K 3 5 W1 W2 W3 N1 22 N2 24 26 C1 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 x Color Group Chromaticity Regions Warm White Neutral White Cool White 1 2 3 4 5 6 7 W1 W2 W3 N1 N2 C1 1, 2, 3, 4 5, 6, 7, 8 9, 10, 11, 12 13, 14, 15, 16 17, 18, 19, 20, 21, 22 23, 24, 25, 26, 27, 28 Min. 2580 2870 3220 3710 4260 5310 CCT (K) Typ. 2700 3000 3500 4000 4700 6000 Max. 2870 3220 3710 4260 5310 7040 Notes: Shipment may contain more than one chromaticity regions.Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is 0.01. x y x y x y x y 0.4582 0.4687 0.4813 0.4099 0.4289 0.4319 0.4147 0.4221 0.4342 0.3814 0.3984 0.4028 0.3702 0.3736 0.3869 0.3722 0.3874 0.3958 0.3481 0.3370 0.3364 0.3557 0.3472 0.3328 0.4700 0.4126 0.4259 0.3853 0.3825 0.3798 0.3466 0.3411 0.4483 0.3919 0.4080 0.3916 0.3670 0.3578 0.3376 0.3616 0.4582 0.4099 0.4146 0.4089 0.3702 0.3722 0.3260 0.3512 0.4700 0.4593 0.4126 0.3944 0.4299 0.4221 0.4165 0.3984 0.3825 0.3783 0.3798 0.3646 0.3265 0.3370 0.3371 0.3472 0.4465 0.4071 0.4017 0.3751 0.3736 0.3874 0.3370 0.3472 0.4562 0.4687 0.4582 0.4260 0.4289 0.4099 0.4080 0.4221 0.4147 0.3916 0.3984 0.3814 0.3616 0.3592 0.3703 0.3788 0.3641 0.3726 0.3265 0.3270 0.3364 0.3371 0.3230 0.3328 0.4373 0.3893 0.3941 0.3848 0.3703 0.3726 0.3260 0.3512 0.4465 0.4071 0.3996 0.4015 0.3592 0.3641 0.3144 0.3408 0.4582 0.4099 0.4146 0.4089 0.3568 0.3495 0.3160 0.3274 0.4483 0.3919 0.4080 0.3916 0.3670 0.3578 0.3265 0.3371 0.4342 0.4028 0.3889 0.3690 0.3616 0.3788 0.3265 0.3371 0.4430 0.4212 0.3941 0.3848 0.3496 0.3702 0.3160 0.3274 0.4562 0.4260 0.4080 0.3916 0.3481 0.3557 0.3175 0.3139 0.4465 0.4071 0.4017 0.3751 0.3592 0.3641 0.3270 0.3230 0.4259 0.3853 0.3825 0.3798 0.3592 0.3641 0.3144 0.3408 0.4342 0.4028 0.3869 0.3958 0.3481 0.3557 0.3028 0.3304 0.4465 0.4071 0.4006 0.4044 0.3466 0.3411 0.3055 0.3177 0.4373 0.3893 0.3950 0.3875 0.3568 0.3495 0.3160 0.3274 0.4221 0.3984 0.3783 0.3646 0.3496 0.3702 0.3160 0.3274 0.4299 0.4165 0.3825 0.3798 0.3376 0.3616 0.3055 0.3177 0.4430 0.4212 0.3950 0.3875 0.3370 0.3472 0.3081 0.3049 0.4342 0.4028 0.3898 0.3716 0.3481 0.3557 0.3175 0.3139 SPEC NO: DSAM3336 APPROVED: WYNEC 8 9 10 11 12 13 14 REV NO: V.4B CHECKED: Allen Liu 15 16 17 18 19 20 21 DATE: AUG/01/2014 DRAWN: Y.Liu 22 23 24 25 26 27 28 PAGE: 6 OF 8 ERP: 1201008031 AA3535QR4A25Z4S-N1 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAM3336 APPROVED: WYNEC REV NO: V.4B CHECKED: Allen Liu DATE: AUG/01/2014 DRAWN: Y.Liu PAGE: 7 OF 8 ERP: 1201008031 PACKING & LABEL SPECIFICATIONS AA3535QR4A25Z4S-N1 Terms and conditions for the usage of this document 1.The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2.The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4.The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5.The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6.All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAM3336 APPROVED: WYNEC REV NO: V.4B CHECKED: Allen Liu DATE: AUG/01/2014 DRAWN: Y.Liu PAGE: 8 OF 8 ERP: 1201008031 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: AA3535QR4A25Z4S-N1