Ha-VIS eCon 3000 Fast Ethernet Basic 3 to 10 Ethernet ports RJ45 and SC English Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control cabinets Commercial temp.: 0C ... +55C / Industrial temp.: -40C ... +70C Energy Efficient Ethernet Fast Ethernet Non-Blocking Switch architecture in accordance with IEEE 802.3 Variants with industrial temperature range of -40C ... +70C Wide range power supply 24/48 VDC Surge protection and reverse polarity protection Minimum energy consumption due to energy-efficient Ethernet Optimised DIN rail bracket Target markets Machinery & Robotics Automation Industrial network infrastructures Wind Energy, Solar Energy Transportation Shipbuilding General Description The Ha-VIS eCon 2000 Fast Ethernet family of unmanaged Ethernet switches is equipped with up to 10 Fast Ethernet ports and allow for cost-efficient and quick expansion and/or reconstruction of network infrastructures. The slender design of the switches enables an extremely high packing density on the DIN rail. The selection includes various combinations of variants with RJ45 and fibre optic ports. Automatic detection of the transmission rate (auto-negotiation) and of the wiring of the twisted pair data cable (autopolarity and auto-MDI(X)) allow for simple plug & play. All variants are available with the temperature ranges "Industrial" and "Commercial". Specification Switch features Ethernet ports 10BASE-Te / 100BASE-TX EEE Housing width Number of ports 25 mm 38 mm 3, 5, 6, 7, 8 9, 10 Type of connection RJ45 Auto-negotiation Yes Yes Switching technology Store and Forward Auto-polarity Supported standards IEEE 802.3 Auto-MDI(X) Yes Frame size 1522 bytes 1632 bytes MAC table size Transfer conditions 1k entries 2k entries 448 kbit 1 Mbit Transfer speed 10 / 100 Mbit/s Transfer length 100 m (Twisted Pair, Cat 5) Packet buffer size Non-blocking Yes Quality of Service Yes Energy Efficient Ethernet Yes PROFINET compatible Yes EthernetIP compatible Yes Twisted pair Ethernet Ports 100BASE-FX Type of fibre Multi-mode (MM) Type of connection Transfer conditions FOC Wavelength Power supply Nominal voltage Permissible voltage range 24 VDC 48 VDC 9 VDC ... 60 VDC Surge protection Yes Reverse polarity proof Yes Starting current Overcurrent protection at input Max. power consumption @ 24 VDC Conductor cross-section Type of connection Pinout Output power Input sensitivity 1.6 A 3.2 A Yes (12 A) Yes (2 A) 1.73 W ... 6.72 W 0.08 mm ... 2.5 mm (28 AWG ... 12 AWG) 3-pole, pluggable screwed contact +/-/ Supply circuit (according to 60950) SELV (circuit breaker 10 A) Service hotline: +49 5772 47-97100, Fax: +49 5772 47-495 Electric@HARTING.com, www.HARTING.com 100 Mbit/s 2 km 15 km -20 dBm ... -14 dBm -15 dBm ... -8 dBm -30 dBm -32 dBm Ambient conditions Commercial temperature range Industrial temperature range Storage temperature range 0C ... +55C -40C ... +70C -40C ... +85C Relative humidity (operation) 0% ... 95% (non-condensing) Relative humidity (storage and transport) 0% ... 95% (non-condensing) Air pressure HARTING Technologiegruppe P.O.Box 1473, D-32325 Espelkamp Wilhelm-Harting-Strae 1, D-32325 Espelkamp, Germany 1310 nm Transfer speed Transfer length Single-mode (SM) SC Duplex 2000 m (795 hPa) Note: We reserve the right to make technical changes to the products and to the content of this document at any time without prior notification. The HARTING Technologiegruppe does not accept any responsibility for possible errors or incompletions in this document. We reserve all the rights to this document and the topics and illustrations contained within it. Copying, disclosure to third parties or use of its content - even partially - is forbidden without the prior written consent of the HARTING Technologiegruppe. Housing Housing width Dimensions H x W x D (without pluggable screwed contact and holding bracket) 25 mm 38 mm 142 mm x 25 mm x 107.5 mm 142 mm x 38 mm x 107.5 mm Weight 430 g ... 531 g Type of installation 35 mm DIN rail acc. to EN 60 715 Anodised aluminium / powder-coated steel sheet Material hoods/housings Protection class (with plugged screwed contact) III Status and diagnostic displays Power ("Pwr") illuminated green Supply voltage is applied Link/Activity ("L/A") off No link Link/Activity ("L/A") illuminated green Link/Activity ("L/A") flashes green Link is active Link is active and data is transferred Link speed ("Spd") off 10 Mbit/s Link speed ("Spd") illuminated yellow 100 Mbit/s EMC and environmental conditions EMC interference immunity (EN 61000-6-1, 61 000-6-2 55024) Electrostatic discharge (ESD) EN 61 000-4-2 Electromagnetic field EN 61 000-4-3 Rapid transients (burst) EN 61 000-4-4 Surge voltages EN 61 000-4-5 Conducted interference voltages EN 61 000-4-6 EMC interference emission (EN 61000-6-4, EN 55 022, FCC CFR 47 Part 15) IP 30 Protection class Approvals (in preparation) CE (FCC CFR 47 Part 15, cUL US 508 listed, DNV, GL, ABS, NK) Mechanical stability (EN 60721-3) IEC 60068-2-6 Vibration IEC 60068-2-6 Resonance search IEC 60068-2-27 Shock test Scope of delivery Pluggable screwed contact for power supply Installation instructions Drawings Specifications / order information Ports / order information Commercial temp.: 0C ... +55C Industrial temp.: -40C ... +70C SC Housing width Power consumption @ 24 VDC MTBF in million h Switch Order no. Switch Order no. RJ45 SFP 2 - 1x MM (2 km) 25 mm 90 mA 2.52 Ha-VIS eCon 3021B-AD 24030021110 Ha-VIS eCon 3021BT-AD 24030021100 2 - 1x SM (15 km) 25 mm 90 mA 2.52 Ha-VIS eCon 3021B-AF 24030021210 Ha-VIS eCon 3021BT-AF 24030021200 4 - 1x MM (2 km) 25 mm 105 mA 2.36 Ha-VIS eCon 3041B-AD 24030041110 Ha-VIS eCon 3041BT-AD 24030041100 4 - 1x SM (15 km) 25 mm 105 mA 2.36 Ha-VIS eCon 3041B-AF 24030041210 Ha-VIS eCon 3041BT-AF 24030041200 4 - 2x MM (2 km) 25 mm 125 mA 2.28 Ha-VIS eCon 3042B-AD 24030042110 Ha-VIS eCon 3042BT-AD 24030042100 4 - 2x SM (15 km) 25 mm 125 mA 2.28 Ha-VIS eCon 3042B-AF 24030042210 Ha-VIS eCon 3042BT-AF 24030042200 6 - - 25 mm 75 mA 2.30 Ha-VIS eCon 3060B-A 24030060010 Ha-VIS eCon 3060BT-A 24030060000 6 - 1x MM (2 km) 25 mm 115 mA 2.22 Ha-VIS eCon 3061B-AD 24030061110 Ha-VIS eCon 3061BT-AD 24030061100 6 - 1x SM (15 km) 25 mm 115 mA 2.22 Ha-VIS eCon 3061B-AF 24030061210 Ha-VIS eCon 3061BT-AF 24030061200 8 - - 25 mm 85 mA 2.17 Ha-VIS eCon 3080B-A 24030080010 Ha-VIS eCon 3080BT-A 24030080000 8 - 1x MM (2 km) 38 mm 220 mA 0.95 Ha-VIS eCon 3081B-AD 24030081110 Ha-VIS eCon 3081BT-AD 24030081100 8 - 1x SM (15 km) 38 mm 220 mA 0.95 Ha-VIS eCon 3081B-AF 24030081210 Ha-VIS eCon 3081BT-AF 24030081200 8 - 2x MM (2 km) 38 mm 280 mA 0.93 Ha-VIS eCon 3082B-AD 24030082110 Ha-VIS eCon 3082BT-AD 24030082100 8 - 2x SM (15 km) 38 mm 280 mA 0.93 Ha-VIS eCon 3082B-AF 24030082210 Ha-VIS eCon 3082BT-AF 24030082200 10 - - 38 mm 200 mA 0.92 Ha-VIS eCon 3100B-A 24030100010 Ha-VIS eCon 3100BT-A 24030100000 Copyright (c) 2014 HARTING Technologie All rights reserved Date of issue 04.2014 Doc No 24030000000/98