English
General Description
Specifi cation
Target markets
Machinery & Robotics Automation Industrial network
infrastructures
Wind Energy,
Solar Energy Transportation Shipbuilding
■ Fast Ethernet Non-Blocking Switch architecture in accordance with
IEEE 802.3
■ Variants with industrial temperature range of -40°C ... +70°C
■ Wide range power supply 24/48 VDC
■ Surge protection and reverse polarity protection
■ Minimum energy consumption due to energy-effi cient Ethernet
■ Optimised DIN rail bracket
3 to 10 Ethernet ports RJ45 and SC
Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control
cabinets
Commercial temp.: 0°C ... +55°C / Industrial temp.: -40°C ... +70°C
Ethernet ports 10BASE-Te / 100BASE-TX EEE
Type of connection RJ45
Auto-negotiation Yes
Auto-polarity Yes
Auto-MDI(X) Yes
Transfer conditions Twisted pair
Transfer speed 10 / 100 Mbit/s
Transfer length 100 m (Twisted Pair, Cat 5)
Ethernet Ports 100BASE-FX
Type of fi bre Multi-mode (MM) Single-mode (SM)
Type of connection SC Duplex
Transfer conditions FOC
Wavelength 1310 nm
Transfer speed 100 Mbit/s
Transfer length 2 km 15 km
Output power -20 dBm ... -14 dBm -15 dBm ... -8 dBm
Input sensitivity ≤ -30 dBm ≤ -32 dBm
Power supply
Nominal voltage 24 VDC 48 VDC
Permissible voltage range 9 VDC ... 60 VDC
Surge protection Yes
Reverse polarity proof Yes
Starting current 1.6 A 3.2 A
Overcurrent protection at input Yes (12 A) Yes (2 A)
Max. power consumption @ 24 VDC 1.73 W ... 6.72 W
Conductor cross-section 0.08 mm² ... 2.5 mm² (28 AWG ... 12 AWG)
Type of connection 3-pole, pluggable screwed contact
Pinout + / - /
Supply circuit (according to 60950) SELV (circuit breaker 10 A)
The Ha-VIS eCon 2000 Fast Ethernet family of unmanaged Ethernet switches
is equipped with up to 10 Fast Ethernet ports and allow for cost-effi cient
and quick expansion and/or reconstruction of network infrastructures. The
slender design of the switches enables an extremely high packing density
on the DIN rail. The selection includes various combinations of variants with
RJ45 and bre optic ports. Automatic detection of the transmission rate
(auto-negotiation) and of the wiring of the twisted pair data cable (auto-
polarity and auto-MDI(X)) allow for simple plug & play. All variants are
available with the temperature ranges "Industrial" and "Commercial".
Ha-VIS eCon 3000 Fast Ethernet Basic
HARTING Technologiegruppe
P.O.Box 1473, D-32325 Espelkamp
Wilhelm-Harting-Straße 1, D-32325 Espelkamp, Germany
Service hotline: +49 5772 47-97100, Fax: +49 5772 47-495
Electric@HARTING.com, www.HARTING.com
Note: We reserve the right to make technical changes to the products and to the content of this
document at any time without prior noti cation. The HARTING Technologiegruppe does not ac-
cept any responsibility for possible errors or incompletions in this document. We reserve all the
rights to this document and the topics and illustrations contained within it. Copying, disclosure to
third parties or use of its content - even partially - is forbidden without the prior written consent
of the HARTING Technologiegruppe.
Switch features
Housing width 25 mm 38 mm
Number of ports 3, 5, 6, 7, 8 9, 10
Switching technology Store and Forward
Supported standards IEEE 802.3
Frame size 1522 bytes 1632 bytes
MAC table size 1k entries 2k entries
Packet bu er size 448 kbit 1 Mbit
Non-blocking Yes
Quality of Service Yes
Energy Effi cient Ethernet Yes
PROFINET compatible Yes
EthernetIP compatible Yes
Energy
Efficient
Ethernet
Ambient conditions
Commercial temperature range 0°C ... +55°C
Industrial temperature range -40°C ... +70°C
Storage temperature range -40°C ... +85°C
Relative humidity (operation) 0% ... 95% (non-condensing)
Relative humidity (storage and
transport) 0% ... 95% (non-condensing)
Air pressure 2000 m (795 hPa)