MTA-156 .156 [3.96] 50 tyco MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors ANP Flectronics Material and Finish Housing UL94V-0 rated, polyester, white Posts Copper alloy, tin plated or .000030 [0.00076] gold over nickel Notes: 1. Post(s) can be omitted for keying pur- poses. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Peg holes are not required in PC Boards when headers without pegs are used. 3. One peg only on a 2 position header, other position sizes have two pegs. 4. Headers with .00015 [0.00038] gold plated post are available upon request. Minimums may apply. 5. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use connectors with a locking ramp for polarization/retention pur- poses, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a lock- ing ramp. See pages 36 thru 39, 60 and 62. Header Ordering Information The Base Part Numbers Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts with pegs would be: Base number 644615 plus prefix-and-suffix 1- -0 The correct ordering number is 1-644615-0 The set of numbers in bold face are the RoHS equivalent version of the standard prod- uct. Example: Lead Free No. of | Standard ROHS Pos. Prefix/Suffix Prefix/Sutfix 2 644615-2 3-644615-2 thru 18 1-644615-8 4-644615-8 See page 15 for an explanation of RoHS lead free equivalents. MTA-156 Polarized Lock HeadersStraight [5.33] 90 Ref. BEE Ax foo-a Typ. | Retention Tabs y Y 4Plc. <A Polarized 156 Retention Peg [3.96] 'YP- 076 sp} [ae (045 faa) } [1.14] Post No. 1 | | 125 I |!) [3.48] / 125 425 Polarized [3.18] '~ [10.80] 7 Retention Peg Peg Hole 066/.062 pi, [1.68/1.57] 7 -225 4, Edge of Board 5 79) Min. PC Board Hole Diameters { Square Round @ OWO oO Post Post -167 .069/.065 .054/.050 [4.24] __ 078 [1.75/1.65] _[1.37/1.27] 156 [1.98] [3.96] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Base Part Numbers Note: Consult Product Drawing for details on placing headers onto PC boards. Square Posts Round Posts Without Pegs With Pegs Without Pegs With Pegs Header No.of Posts/ Header No. of Posts/ Part Nos. RoHS Equiv. Part Nos. RoHS Equiv. Standard UL94V-0, Tin Plated Header No. of Posts/ Header No. of Posts/ Part Nos. RoHS Equiv. Part Nos. RoHS Equiv. 2-18 2-18 2-18 2-18 644611 32-48 644615 32-48 644612 32-48 644616 32-48 Standard UL94V-0, .000030 [0.00076] Gold Plated 2-18 2-18 2-18 2-18 644627 32-48 644631 32-48 644628 32-48 644632 32-48 Note: Al! RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. Catalog 82056 Revised 4-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967