74LVC14A HEX INVERTERS WITH SCHMITT TRIGGER INPUTS Description Pin Assignments The 74LVC14A provides six independent schmitt trigger inverter buffers. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. The gates perform the positive Boolean function: Y=A Features * Wide Supply Voltage Range from 1.65V to 5.5V * Outputs sink or source 24mA at VCC = 3.3V * CMOS low power consumption * IOFF Supports Partial-Power-Down Mode Operation * Inputs or outputs accept up to 5.5V * Inputs can be driven by 3.3 V or 5.5V allowing for voltage translation applications. * ESD Protection Exceeds JESD 22 200-V Machine Model (A115-A) 2000-V Human Body Model (A114-A) Exceeds 1000-V Charged Device Model (C101C) * Latch-Up Exceeds 250mA per JESD 78, Class II * Range of Package Options SO-14 and TSSOP-14 * Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) * Halogen and Antimony Free. "Green" Device (Note 3) Notes: Applications * Voltage Level Shifting * General Purpose Logic * Power Down Signal Isolation * Wide array of products such as: PCs, networking, notebooks, ultrabooks, netbooks Computer peripherals, hard drives, CD/DVD ROM TV, DVD, DVR, set top box 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 74LVC14A Document number: DS35262 Rev. 3 - 2 1 of 10 www.diodes.com July 2012 (c) Diodes Incorporated 74LVC14A Pin Descriptions Pin Number Pin Name Description 1 1A 2 1Y Data Output 3 2A Data Input Data Input 4 2Y Data Output 5 3A Data Input 6 3Y Data Output 7 GND 8 4Y Data Output Data Input Ground 9 4A 10 5Y Data Output 11 5A Data Input 12 6Y Data Output 13 6A Data Input 14 VCC Supply Voltage Logic Diagram 1A 2A 3A 4A 5A 6A 1 2 3 4 5 6 9 8 11 10 13 12 1Y 2Y 3Y 4Y 5Y 6Y Function Table Inputs A Outputs Y H L L H 74LVC14A Document number: DS35262 Rev. 3 - 2 2 of 10 www.diodes.com July 2012 (c) Diodes Incorporated 74LVC14A Absolute Maximum Ratings (Note 4) (@TA = +25C, unless otherwise specified.) Symbol ESD HBM ESD CDM Description Human Body Model ESD Protection Unit 2 KV 1 KV 200 V Supply Voltage Range -0.5 to 6.5 V VI Input Voltage Range -0.5 to 6.5 V VO Voltage applied to output in high impedance or IOFF state -0.5 to 6.5 V ESD MM VCC Charged Device Model ESD Protection Rating Machine Model ESD Protection VO -0.3 to VCC +0.5 Voltage applied to output in high or low state IIK Input Clamp Current V VI < 0 -50 mA IOK Output Clamp Current VO < 0 -50 mA IO Continuous output current 50 mA 100 mA Operating Junction Temperature -40 to +150 C TSTG Storage Temperature -65 to +150 C PTOT Total Power Dissipation 500 mW Continuous current through VDD or GND TJ Note: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. Recommended Operating Conditions (Note 5) (@TA = +25C, unless otherwise specified.) Symbol VCC Note: Parameter Conditions Min Max Unit 1.65 5.5 V 0 5.5 V Active Mode 0 VCC V VCC = 0V; Power Down Mode 0 5.5 V -40 +125 C Supply Voltage VI Input Voltage VO Output Voltage TA Operating free-air temperature 5. Unused inputs should be held at VCC or Ground. 74LVC14A Document number: DS35262 Rev. 3 - 2 3 of 10 www.diodes.com July 2012 (c) Diodes Incorporated 74LVC14A Electrical Characteristics (@TA = +25C, unless otherwise specified.) Symbol VT+ VT- VH Parameter Test Conditions Positive Going Threshold Negative Going Threshold Hysteresis (VT+ - VT-) High Level Output Voltage High-level Output Voltage Input Current Min Max Min Max 2.5V 0.9 1.7 0.9 1.7 2.7V 1.1 2.0 1.1 2.0 2.7V to 3.6V 1.1 2.0 1.1 2.0 2.5V 0.4 1.2 0.4 1.2 2.7V 0.8 1.5 0.8 1.5 2.7V to 3.6V 0.8 1.5 0.8 1.5 2.5V 0.3 0.2 2.7V 0.3 0.3 0.3 0.3 VCC - 0.2 VCC - 0.3 IOH = -4mA 1.65V 1.2 IOH = -8mA 2.3V 1.9 2.7V 2.2 2.05 3.0V 2.3 2.1 IOH = -24mA 3.0V 2.2 2.0 IOH = 100A 1.65V to 5.5V Unit V V V 0.2 0.3 IOH = 4mA 1.65V 0.45 0.6 IOH = 8mA 2.3V 0.70 0.85 2.7V 0.40 0.6 IOH = 12mA II TA = -40C to +125C 2.7V to 3.6V IOH = -12mA VOL TA = -40C to +85C 1.65V to 3.6V IOH = -100A VOH VCC V 3.0V 0.55 0.6 IOH =-24 mA 3.0V 0.55 0.6 VI =GND to 5.5V 3.6V 5 20 A 0 10 20 A 3.6V 10 40 A 2.7V to 3.6V 500 5000 A Power Down IOFF Leakage Current ICC Supply Current ICC Additional Supply Current VI or VO = 0V to 3.6V VI = GND or VCC IO=0 One input at VCC -0.6 V Other 74LVC14A Document number: DS35262 Rev. 3 - 2 4 of 10 www.diodes.com July 2012 (c) Diodes Incorporated 74LVC14A Switching Characteristics Symbol Parameter tPD Propagation Delay AN to YN tSK(0) Output Skew Time Test Conditions VCC Figure 1 1.65V to1.95V 2.3V to 2.7V 2.7V 3V to 3.6V TA = +25C Min Typ Max 0.5 0.5 0.5 0.5 4.1 3.6 3.0 2.5 -40C to +85C Min Max 8.9 7.0 5.3 4.8 0.5 0.5 0.5 0.5 3V to 3.6V 8.9 7.5 5.5 4.8 -40C to +125C Min Max 0.5 0.5 0.5 0.5 1.0 Unit 9.5 9.0 7.0 6.0 ns 1.5 ns Operating Characteristics (@TA = +25C, unless otherwise specified.) Parameter Power dissipation capacitance per gate Cpd CI Input Capacitance Test Conditions VCC = 1.8V Typ VCC = 2.5V Typ VCC = 3.3V Typ VCC = 5V Typ Unit f = 10MHz 7.0 7.5 8.0 8.6 pF 4 4 4 4 pF Vi = VCC - or GND Package Characteristics Symbol Note: Parameter Test Conditions JA Thermal Resistance Junction-to-Ambient SO-14 JC Thermal Resistance Junction-to-Case SO-14 TSSOP-14 TSSOP-14 VCC (Note 6) (Note 6) Min Typ TBD Max Unit o C/W 159 TBD o C/W 25 6. Test condition for SO-14 and TSSOP-14: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. 74LVC14A Document number: DS35262 Rev. 3 - 2 5 of 10 www.diodes.com July 2012 (c) Diodes Incorporated 74LVC14A Parameter Measuement Information VCC Inputs VM CL 2ns VCC/2 30pF 1K 2ns VCC/2 30pF 500 VI tr/tf 1.8V0.15V VCC 2.5V0.2V VCC RL 3.3V0.3V 3V 2.5ns 1.5V 50pF 500 5V0.5V VCC 2.5ns VCC/2 50pF 500 Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A . Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate 10 MHz C. Inputs are measured separately one transition per measurement D. tPLH and tPHL are the same as tPD Figure 1. Load Circuit and Voltage Waveforms 74LVC14A Document number: DS35262 Rev. 3 - 2 6 of 10 www.diodes.com July 2012 (c) Diodes Incorporated 74LVC14A Ordering Information Quantity Part Number Suffix S14 SO-14 2500/Tape & Reel -13 T14 TSSOP-14 2500/Tape & Reel -13 Package Code 74LVC14AS14-13 74LVC14AT14-13 Notes: 13" Tape and Reel Packaging (Note 7) Device 7. The taping orientation and tape details can be found at http://www.diodes.com/datasheets/ap02007.pdf Marking Information (1) SO-14 , TSSOP-14 ( Top View ) 14 8 YY : Year : 08, 09,10~ WW : Week : 01~ 52; 52 represents 52 and 53 week X : Internal Code Logo 74LVC14A YY WW X Part Number 1 7 Part Number 74LVC14A Document number: DS35262 Rev. 3 - 2 Package 74LVC14AS14 SO-14 74LVC14AT14 TSSOP-14 7 of 10 www.diodes.com July 2012 (c) Diodes Incorporated 74LVC14A Package Outline Dimensions (All dimensions in mm.) Package Type: SO-14 E H Gauge Plane L Detail "A" D 7 (4 x) A2 A e B A1 Detail "A" SO-14 Dim Min Max A 1.47 1.73 A1 0.10 0.25 A2 1.45 Typ B 0.33 0.51 D 8.53 8.74 E 3.80 3.99 e 1.27 Typ H 5.80 6.20 L 0.38 1.27 0 8 All Dimensions in mm 0.25 Package Type: TSSOP-14 B Gauge Plane Seating Plane L F1 a2 Pin# 1 Indent F Detail `A' G K A a1 D TSSOP-14 Dim Min Max a1 7 (4X) a2 8 0 A 4.9 5.10 B 4.30 4.50 C 1.2 D 0.8 1.05 F 1.00 Typ F1 0.45 0.75 G 0.65 Typ K 0.19 0.30 L 6.40 Typ All Dimensions in mm C Detail `A' 74LVC14A Document number: DS35262 Rev. 3 - 2 8 of 10 www.diodes.com July 2012 (c) Diodes Incorporated 74LVC14A Suggested Pad Layout Package Type: SO-14 X C1 C2 Dimensions Value (in mm) X 0.60 Y 1.50 C1 5.4 C2 1.27 Y Package Type: TSSOP-14 X C1 C2 Dimensions Value (in mm) X 0.45 Y 1.45 C1 5.9 C2 0.65 Y 74LVC14A Document number: DS35262 Rev. 3 - 2 9 of 10 www.diodes.com July 2012 (c) Diodes Incorporated 74LVC14A IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2012, Diodes Incorporated www.diodes.com 74LVC14A Document number: DS35262 Rev. 3 - 2 10 of 10 www.diodes.com July 2012 (c) Diodes Incorporated