FFSD-20-S-10.00-01-N F-219 TIGER TM IDC EYE (1.27 mm) .050" FFSD-10-D-02.00-01-N FFSD SERIES TIGER EYE FLAT IDC WIRE CABLES TM Mates with: FTS, FTSH, EHF, SHF, ESHF TYPE STRIP NO. PINS PER ROW OVERALL LENGTH END OPTION 01 OTHER OPTION N SPECIFICATIONS For complete specifications see www.samtec.com?FFSD -S Insulator Material: PBT Contact: BeCu Plating: 10 " (0.25 m) Au over 50 " (1.27 m) Ni on contact area; Sn over 50 " (1.27 m) Ni on balance Wire: 30 AWG Current Rating (FFSD/FTSH): 2.3 A per pin (2 pins powered) Operating Temp Range: -40 C to +105 C Lead Size Accepted: (0.41 mm) .016" SQ Insertion Depth: (2.64 mm) .104" to (3.17 mm) .125" RoHS Compliant: Yes -N = Single End -04, -05, -06, -08, -10, -11, -12, -13, -15, -17, -20, -25 -"XX.XX" = Notch Polarization Notch option (Not available with -04 position) = Assembled Length -D Assembled Length in INCHES (1/8") 2 inches minimum = Double End (Standard sizes) FFSD = Socket Strip RECOGNITIONS (1.90) .075 For complete scope of recognitions see www.samtec.com/quality 01 (3.05) .120 (1.02) .040 FILE NO. E111594 No. of positions x (1.27) .050 + (4.19) .165 (5.08) .200 (1.27) .050 Reverse -RW = Wiring Daisy -D "XX" = Chain -R = Reverse Strain -SR = Relief Outside -O = Reverse ALSO AVAILABLE (Mates only with ESHF Series) (MOQ Required) (50.8 mm) 2.00 min. * Other sizes "XX" 1/8" Requires -DXX 3 No. of positions x (1.27) .050 + (8.00) .315 3 -M 01 = Middle Reverse (101.60 mm) 4.00 min. 02 Red wire opposite position #1. * Strain relief option Requires -DXX Note: This Series is non-standard, non-returnable. 1 2 3 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. Not available with -O, -M, -R or -DXX