Connectors Universal MATE-N-LOK 16 AMP Soft Shell Pin and Socket Connectors Product Facts m@ Pins and sockets can be intermixed in the same housing m Positive polarization m= Rear cavity identification = Contacts completely en- closed in housings @ Positive locking housings = Insulation capability to .200 [5.08] diameter m Removable, crimp snap-in contacts m Low contact mating force w Contacts accept 30-10 AWG [.05-5.0 mm] wire sizes = Contacts available with pre- tin or gold plating @ Dual locking lances provide optimum contact stability @ Panel mount or free hanging @ Mate with Universal MATE-N-LOK Il Housings m Available in UL 94V-0 flame retardant material. Meets the material requirements of table 25.1 of U.L. Standard 1410 (television receivers and video products) @ Not for interrupting current m Harness to PC Board capabil- ity using pin or secket headers = Pin and socket headers are available in both vertical and right angie style @ Solderabilityheaders meet MIL-STD 202 Method 208 = Contacts are on .250 [6.35] centerline spacing @ Recognized under the Component Program of AW Underwriters Laboratories, Inc. File No. 28476 @ Certified by Canadian Standards Association File No. LR 7189 = Passed test by VDE under their Registration Number 5618/Continuous Surveillance SRe Universal MATE-N-LOK Connectors Performance Characteristics The Universal MATE-N-LOK Connector performance characteristics found on pages 16 and 17 are based on free hang- ing and panel mount connectors, loaded with contacts crimped on stranded wire. Dielectric Withstanding Voltage 5.0 KVAC or 10.0 KVDC between adjcent circuits Insulation Resistance 1000 megohms minimum initial between adjacent circuits Voltage Rating 600V AC or DC Connector Mating Solid Pin -3.0 Ib. max. per circuit Split Pin 1.5 Ib. max. per circuit Connector Unmating Solid Pin.7 Ib. min. per circuit Split Pin ~ .5 tb. min. per circuit Contact Insertion Force 5.0 lb. max. per contact Contact Retention 15 tb. min. per contact Durability 50 cycles, mating and unmating For drawings, technical data or samples. contact your AMP sales engineer or call the AMP Product Information Center: 1-800-522-6752. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Technical Documents Product Specifications 108-1031 Universal MATE-N-LOK Connectors 408-1053 Universal MATE-N-LOK PC Board Headers Application Specification 114-1010 Universal MATE-N-LOK Contacts Instruction Sheet 408-7714 Plug, Cap, Headers, Pin. Socket and Accessories Specifications subject to change. Consult AMP for latest specifications. Catalog 82181AMP Soft Shell Catalog 82181 Pin and Socket Connectors Revised 7-97 Universal MATE-N-LOK Connectors (Continued) Performance Current Rating Verification for 30C Maximum Temperature Rise 100% Energized Characteristics (Continued) . : Wire-to-Wire Maximum Current Maximum current rating of Universal MATE-N-LOK con- UMNL Calculated Current Table nectors is limited by the maximum oper- Number of Wire Gauge ating temperature of the housings which Circuits 10 12 14 16 18 20 22 24 26 30 is 105C including the temperature rise 2 19.00 18.00 17.00 14.50 1300 10.00 6800 650 5.50 3.50 of the contacts which is a maximum of 3 17.50 16.50 15.50 13.00 12.00 9.00 7.50 6.00 5.00 3.00 30C. There are several variables which 4 16.50 15.50 15.00 1250 11.00 850 7.00 550 4.50 3.00 have a direct effect on this maximum 5 16.00 15.00 1400. 1200 1050 800 650 550 450 3.00 current-carrying capability for a given connector and must be considered for 6 Inline 15.50 14.50 13.50 11.50 10.00 8.00 6.50 5.00 4.00 2.50 each application. These variables are: 6 Matrix 15.00 14.00 13.00 11.00 9.50 7.50 6.00 5,00 4.00 2.50 ; . / 8 14.50 14.00 13,00 10.50 9.50 7.50 6.00 5.00 4.00 2.50 Wire Size Larger diameter wire will 9 13.50 12.50 114.50 9.50 8.50 6.50 5.50 4.50 3.50 2.00 Oe eee Tees 10 14.00 13.00 1250 1000 900 7.00 550 450 350 2.50 5 generates less heat. Langer wire lengths 2 a us * 9.00 8.00 6.00 5.00 4.00 3.00 2.00 also enhance current carrying capabili- 5 2.00 50 0,00 8.50 7.50 6.00 4.50 4.00 3.00 2.00 ties since the wire conducts heat away Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selectian from the connector. of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully . loaded housings being 100% energized. Note: All combinations were not tested, and this chart contains interpolated Connector Size in general, the more and extrapolated values. circuits in a connector, the less current can be carried. Ambient Temperature The higher the ambient temperature, the less current can be carried in any given connector. Minimum Wire Lengths for T-Rise vs. Current Testing Printed Wiring Board Conductor AWG Min. Length (in.) AWG Min. Length (in.) Size The finished trace conductor width 30 26 18 9.4 and thickness should be maximized to 28 3.2 16 11.3 allow for the greatest current carrying 26 44 14 13.7 capacity and heat dissipation. 24 5A 12 16.4 20 7.8 10 19.3 Note: If wire lengths used are less than those listed above, the current car- Universal MATE-N-LOK connectors also rying ability of the system will be reduced due to less heat being conducted will withstand the following tests: away from the connector. The customer should fully test all applications. Vibration 10-55-10 cycles per minute . at .06 inch total excursion Wire-to-Board . Due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a sep- Physical Shock 18 drops, 50 g saw- arate current carrying chart for our printed circuit board header products. However, the above Wire-to-Wire charts may tooth at 10 milliseconds be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. For vertical head- Housing Panel Retention 75 |b. min. ers, only 75% of the Wire-to-Wire value should be used. The chart values are only a tool for connector selection and will require the customer to fully test their application. Housing Lock Strength 30 /b. min. Thermal Shock 55C to +85C ; ; Termination Resistance/Contact Crimp Tensile Force Temperature-Humidity Cycling 25C to 65C at 95 RH Termination act Corrosion 48 hr at 5% salt __Wire Size _Resistanee__- Tensile Force concentration AWG mm? Current -Milliohms Force (Min.) (Amps) (Max. Init.) lbs. N 30 05 2 9 28 08 3 13 Related Product Data 26 12 6 27 Product Specifications 24 2 15 3.50 8 36 108-1031 Universal MATE-N-LOK 22 3 3 3.50 14 62 Connectors 20 45 4.5 3.00 14 62 108-1053. Universal MATE-N-LOK 18 8 6 3.00 30 133 Headers 16 12 8 2.75 45 200 14 2.0 10 2.75 50 222 12 3.0 60 267 10 5.0 = 70 3it Note: This is the total resistance between wire crimps of a mated pin and socket. Ts For drawings, technical data or samptes, contact your AMP sales engineer or call the AMP Product Informaticn Center: 1-800-522-6752. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivatents Specifications subject to change. Consult AMP for latest specifications. $10}98uU09 MOT-N-FLVIN [eSdaAtuf]Connectors Universal MATE-N-LOK AMP Soft Shell Catalog 82181 Pin and Socket Connectors Revised 7-97 Universal MATE-N-LOK Connectors (Continued) Universal MATE-N-LOK Connector Mating Combinations Connector Part Number Mating Connector Part Number PC Board Headers Number an Plug Cap Vertical Pin? Vertical Socket? Right Angle? oof Fiartng Style Part Part lati Standard Standard a Circuits 9 Number? Number? T'4""9 Standard "SO Long Standard Tail Long Pin Socket Tail pojarized Tall Tail Polarized Tail 7 ___1-350867-0 770421-1 _ _ _ _ _ _ , _(Phsavre 1-641084-0 _1-641083-0 ~ ~ UL94V-0 350865-1 350866-1 _ _ _ _ _ = ULg4V-2 in-Ling 1"480698-0 1-480699-0 Pre-tin 3504281 641963-1 350582-1 350759-4 643411-1 350986-4 ~ _ 1-770113-09 -1-770114-0 Duplext 350428-2 641963-2 350582-2 350759-3 _ _ 2 641964-1 ULoav-o incline 350777-1 ssorza1 Prelin 950786-1 = 950787-1 3508241 643412-1 350831-1 1-360942-0 643226-1 Duplex 350786-2 641964-2 35076/-2 3508242... = 2350842-0 UL94V-2 In-Line 1-480700-0 4-480701-0 Pre-tin 350429-1 641965-1 350583-1 350760-4 643413-1 350987-4 _ _ 1-641771-03 -1-641767-0? Duplex 350429-2 350583-2 350760-3 = _ _~ 3 641966-1 UL9aV-0 IncLine 350766-1 asover-1 retin 350789-1 - 350790-1 350825-1 643414-1 350892-1 1-250943-0 649228-1 Duplex 350789-2 350790-2 360805-2 643414-2 _350802-2 2-350043-0 UL94V-2 nctine 1-480702-0 1-480703- _Pre-tin 360430-1 641967-1 350584-1S60761-4 643415-1 950988-41-350548-0_ 4 770208-18 770209-13 Duplex 350430-2 350584-2 350761-3 _ 350988-3 ~ Pre-tin 360792-1 641968-1 350793-1 _350826-1 643416-1 350833-1 1-350944-0 6432301 UL94V-0 In-Line 350779-1 350780-1 nine 801 Duptex 3507922 350793-2 3808262 ~=O 350833-2 2-350944-0 643230-2 Pre-tin 640466-1 643405-1 640467-1 = _ 1-350040-0 2 . ULOAV-2 InrLine 1-480763-0 1-480764-0 Tee $e = . = . Pre-tin 640900-1 643406-1 6400011. _1-350945-0 643232-1 UL94V-0 In-Line 350899-1 | m 3508101 Flex 6409002 6409012~O = 2-350945-0 643232-2 VLOaV-2 In-Line e40886-1 goeaoya Pietin 6418921 6434077 = = = 640587-1 Duplex = = = = = = = Pre-tin 641831-1 6434081. = = = 640583-1_643234-1 4V-0 Ink 4 . 5 ULEAV-0 In-Line 640581 9263073 ext = _770262-2~=O = 640583-2 643234-2 ULoav-2 Matric 4.06 geo, 1-480705-0 Pre-tin 350431-1 641969-1 350585-1 350762-4 643423-1350989-4 794096-15 1841766-0 Dupiext 350437-2. 350585-2 350762-3 350989-3 Pre-tin 350/11-1_641970-1 50732-1 _350827-1 _643424-1 _ 350834-1 = = 0 Mat . 4 ULOAV-0 Matrix 3907151390781"! Dupiext 350711-2 641970-2 _350732-2 _450827-2 6434242 3508342 = ULO4V-2 In-Line 640586-1 926308-1 Sian SAE TON = = = 8 Pretin 641828-1 6434101 = 640584-1 643326-1 UL94V-0 In-Line 640532-1 9263083 = = = SADEEED GATED ULQ4V-2 Matrix 1-480796-0 4-480707-0 Pre-tin 350432-1 641971-1 350586-1 350763-4 643425-1 350990-4 ~ _ 1-641759-0 1-641765-0 Duplex 350432-2 641971-2 350586-2 350763-3 ~ 350990-3 9 641972-1 UL94V-0 Matrix 350720-1 gsorao-1 Pretin 3507124 == 350742-1 350828-1 643426-1 950836-1 _ Duplex 350712-2 641972-2 350742-2 350826-2 643426-2 350805-2. 2 = UL94V-2 In-Line 926302-1 926gog-1 etn _ = = = ~ - 10 Duplex' _ _ _ _ _ _ _ _ UL94V-0 In-Line 926302-3 92eg0a-g etn _ ~ = = Duplex _ _ _ _ _ _ _ _ ULQ4V-2 Matrix 1-480708-0 4-480709-0 Pre-tin 350433-1 641973-1 350587-1 350764-4 _ 350991-4 _ = 1-641768-0 641764-15 Duplex 350433-2. 0 350587-2 350764-3 350991-3 = 12 641974-1 uLaav-o Matrix 350736-1 gsorag1 retin 360713-1 = 360737-1 350829-1 643428-1 350896-1 _ Duplex 350713-2 641974-2 350737-2 350829-2. 350836-2.2~O = Pre-tin 350434-1 641975-1 350588-1 350765-4 643429-1 350992-4._ | = - ULOAV-2 Matrix 1-4B0710-0 1-4B0711-0 ears segs ag0765 = - Pre-tin 350714-1 641976-1 _350738-1 _350800-1 _643430-1 _350837-1 = - ULS4V-0 Matrix 350736-1 3807841 TF ioiex g507142 _350738-2 3808302 350887-2. = Duplex Finish ~ Plated with .000030 [.000762] min. gold in mating area, matte tin-lead on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2Universal MATE-N-LOK Plug and Gap housings accept pin or socket contacts. Use the appropriate contacts in the Plug housing as required by the mating component. 3Housing material has 125C temperature rating. Lime green color. 12 Circuit cap black color. 4Black in color. 5Tool Removabie 18 For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center, 1-800-522-6752. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. Consult AMP for latest specifications.AMP Soft Shell Catalog 82181 Pin and Socket Connectors Revised 7-97 Contacts Solid pin diameter .084 [2.13] Split pin diameter .086 [2.18] Stock thickness .012 [.305] unless otherwise noted Universal MATE-N-LOK Connectors (Continued) Related Product Data Product Specification 108-1031 Universal MATE-N-LOK Connectors Application Specification These contacts can be used in either 114-1010 Universal MATE-N-LOK joo Universal MATE-N-LOK Plug or Cap Contacts -e_ L-___ housings only. Performance Characteristics Pin Socket pg. 16 and 17 Technical Documents pg. 16 and 91 Application Tooling pg. 92-94 Housings pg. 21 Wire Size | | Contact Part Numbers HOM anetse "Range, asa Material & Finish Pin Socket A later Hand Tool Strip Form Loose Form Strip Form =~ Loose Form , 30-26 032-057. .790 760 Brass, Pre-tin 350924-1 770672-1 350025-1 770873-1 46661628 05-12] 813-145 20.06 19.30 ~~ Phos. Brz., Gold? -350904-6 770872-6 -350925-6 466616-3 98439-1 350851-1 Brass, Pre-tin 350561-1 350690-1 3505704) 350689-1! Brass. Gold? 350561-2 360690-2 0851-2 _640347-2 24-18 .040-.100 .790 .760 350570-2" _350689-2' 466320-1 [2-8] 1.02-2.54 20.06 19.30 oo 350B51.7. ST :Ct BBO GOSOO-2 Brass, Select Gold? 350561-7 350690-7 350689-71 466320-4 Seeeeieneeenann 350570-7' Phos. Brz.,Pre-tin 350561-3 350690-3 350570-3' 350689-3" Phos. Brz., Select Gold? 350570-6' Brass, Pre-tin 350218-1 350547-1 350536-1 350550-1 sot 060-130 780 760 ats: Goi? 350218-2 350547-2 -350536-2 -350550-2 ga vze9 46 (52.0) $223.30 3006 i930 Blass, Select Gold? 350218-7_350547-7 _350536-7 _350550-7 687763-2 90296-2 Phos. Brz.,Pre-tin 950218-3 350547-3 360536-3 350550-3 987763-6 Phos. Brz., Select Gold? 350218-6 350547-6 350536-6 3505506 Brass, Pre-tin 350538-1 350552-1 350537-1 350551-1 so-t4 130.200 810 7 Brass, Gold 950538-2 -350552-2 3505372 350551-2 ga zang 40 ; (320) 330508 3057 ijt, _ Brass, Select Gold? 350538-7 _380552-7 _350537-7 _360561-7 687926-2 ooeee Phos. Brz., Pre-tin 350538-3 350552-8 350537-3. 350551-g 87926-6 Phos. Brz., Select Gold? 350538-6 350552-6 350537-6 350551-6 18-144 6430-200 810.780 Brass, Pre-tin 350873-1 350874-1 _ deocenns 90298-2 [.8-2.0] 3.30-5.08 20.57 19.81 Phos. Brz.,Pre-tin 350873-3 350918-3 350874-3. 3509193 agesea3 90299-2 12-10 200 max.! 810.780 Phos. Brz., Pre-tin 350922-3 640309-3 350923-3 640310-3 466597-1 132050] S08 30.57 igg1 Phos. Brz., Select Gold? 350922-6 640309-6 _360923-6__640310-6 498597-2 69710-1 Phos. Brz., Gold? 350922-4 350923-4 3 Socket Contact ~ .010 [.254] stock thickness ?Gold Finish Plated with .000030 [.000762} min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underptate on entire contact. 3Select Gold Finish Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact. Recommended for predominant use of 14 AWG wire. 5There is no insulation barrel on this contact. Insulation maximum diameter is limited by the housing. HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -3, -4 & -6 are used on AMP-O-LECTRIC Model G Machine. See page 95 for further information. 7Hand Tool No. 90298-2 is for wire size 20-18 AWG: Hand Tool No. 90299-2 is for wire size 16-14 AWG. Hand Tool No. 69710-1 use die set No. 58380-1 for 12 AWG and No, 58380-2 for 10 AWG. Note: Phosphor bronze material contacts should be used in high temperature/humidity cycling applications. Dimensions are for reference only. Contact Insertion Tool Contact Extraction Tool No. 318851-1 (For inserting contacts applied to small diameter wire) {S 408-4371 No. 91002-1 IS 408-7347 For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center: t-800-522-6752. Dimensions are in inches and rnillimeters unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. Consult AMP for latest specifications. 19 $10}93UU09 NOT-N-JLVW [eSisatufUniversal MATE-N-LOK Connectors 20 AMP Soft Shell Catalog 82181 Pin and Socket Connectors Revised 7-97 Universal MATE-N-LOK Connectors (Continued) Contacts Split Pins Solid pin diameter .084 [2.13] Split pin diameter .086 (2.18) Stock thickness .012 [.305] These contacts can be used in either Universal MATE-N-LOK Plug or Cap Wire Size Ran HDM C ge ins. Dia. L a Contact Part Number ; Hand Toot housings only. AWG Imm?] Range Dim. Material & Finish Strip Form Loose Form pblicator part No. Related Product Data __ Brass, Pre-tin 350699-1_350706-1 4ge3a0-12 Product Specificati (28) 102254 30.05 Bass: Gold|__950699:2_360706-2 496920-2 90300-2 108 wo A I Mare ALLOK es Brass, Select Gold? _350699-7 _350706-7_ 466320-4 ~ {V@FSal ~N- j Brass, Pre-t 350687-1350705-1 ; Connectors 20-14 060.130 _.790 Brass Geld 87.2 py Oeee _ 8 35) 280-130 5790 __Brass, Go 350687-2 _350705-2 687763-2 90296-2 Application Specitication Brass, Select Gold? 350687-7 _350705-7 987763-6 114-1010 Universal MATE-N-LOK __Brass, Pre-tin = 350700-1-350707-1 gg7996.18 Contacts (e206 33p 255 8 Brass, Goid' 350700-2 _350707-2 687926-28 Brees Performance Characteristics pg. 16 __ __ ~_Brass, Select Gold! __350700-7__350707-7_SB79P6-S* : and 17 Technical Documents pg. 16 and $1 Application Toolingpg. 92-94 Housings pg. 21 Dimensions are for reference only. 'Gold Finish Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact. Select Gold Finish Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel under- plate on entire contact. SHDM Applicator part number ending in -1, is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -4 & -6 are used on AMP-O-LECTRIC Model G Machine. See page 95 for further information. Hand Tool No. 90298-2 for wire size 20-18 AWG. Hand Tool No. 90299-2 for wire size 16-14 AWG. Notes: 1. AMP recommends split pins be used in housings having 6, 9, 12 and 15 circuits to reduce mating force. 2. Phosphor bronze material contacts are available for use in high temperature/humidity cycling applications, consult AMP. Grounding Pin (100 [2.54] longer than standard pin} (Mate first, break last, not for interrupting current) Wire Size Range Ins. Dia. L Material & Fini Contact Part Number HDM Hand Tool . aterial & Finish ____ Applicator AWG [mm] Range Dim. Strip Form Loose Form ee No. Part No. 24-18 060-130 .890 567216-22 [.2-.8] 1.52-3.30 22.60 Brass, Pretin = _770210-1 567216-3 687763-1? ee tees 303890 Brass, Pretin -350654-1 350669-1 687763-2? 90296-2 5-2. 52-3. 687763-6? 466597-12 ; a4 0 200 max.! oat Phos. Brz.,Pre-tin 770234-3 _ 466597-22 0 0-5. 466597-3 There is no insulation barrel on this contact. Insulation maximum diameter is limited by the housing. 2HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -3 & -6 are used on AMP-O-LECTRIC Model G Machine. See page 95 for further information. Programmable Connector 04g Contact J 1.22) (Socket with 110 Series Special SS -805 FASTON Tab) se . Material and Finish Brass, pre-tin Part Number 350877-1 Note: This contact will accept a 110 Series FASTON Receptacle Part No. 350871-1 (strip form) allows simple field wiring or wiring changes. For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product information Center: 1-800-522-6752. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Specitications subject to change. Consutt AMP for latest specifications.AMP Soft Shell Catalog 82181 Pin and Socket Connectors Revised 7-97 Housings Free Hanging or Panel Mount .290 [6.35] Centerline spacing 1 Circuit, Free Hanging .290 {7.37] NY | .290 ' >| 737i . 1.080 >| (11-68) [27.43] Plug -380 i [9-65] el 1 i L.- 1.080 + 380 |_| [27.43] [9.65] Cap Related Product Data Product Specification 108-1031 Universal MATE-N-LOK Connectors Performance Characteristics pg. 16 and 17 Contacts pg. 19 and 20 Panel Cutout Recommendations pg. 22 Keying Plug pg. 22 Strain Reliefs pg. 22 and 23 Technical Documents pg. 16 and 91 Mating Headers pg. 26, 27, 28, and 29 Other Mating Connectors Universal MATE-N-LOK ii Housings pg. 8, 9anc 10 Dimensions are for reference only. Universal MATE-N-LOK Connectors (Continued) 2,3, 4,5, 6, 8 and 10 Circuit, In-Line 460 (11.68] .300 = [7.62] (e580 i 1.080 14.73 (27.43] l Plug 6 Circuit, Matrix f=, pLe@2Qn feo ooOo}" it | & OOO a |'*" doo9 | ! aS | | =< -800 fo ah 4.080 ie 1.080 , eras > 1.120 127.43] Plug [27.43] 43] Cap [28.45] 9, 12 and 15 Circuit, i fa Matrix | - OL] A OOD O | | | 460 | } -800 - i 20.32) [11.68] -~! 080 | 1.080 (27.43) Plug Cap Number of A Housing Part Numbers umber o Circuits Dim. UL94V-2 Nylon, Natural Color UL94V-0 Nylon, Plug Cap Plug Cap 1-350867-0 77042141 1 _ ee 4 - 1-641084-02 1-641083-0'2 350865 350866-1 550 4-480698-0" 4-480699-0" 2 =11 41 13.97 1-770113-0'2 1-770114-0 380777 350778-1 .800 1-480700-0' _1-480701-0"_ ' 8 20.32 1-641771-0'2 1-641767-0%2 350766-1 S50767-1 1.050 1-480702-0' 1-480703-0' 26.67 770208-1 770209-1'2 35077971 350780-1 5 aoe 1-480763-0' 1-480764-0' 350809-1" 360810-1" 1.550 640585-1! 926307-11 640581-1" 926307-3" 39.37 a te ee 6 1-480704-0 ore 1-480705- _ 794096-1 80705-0 350715-1 380781-1 1-641770-02 1-641766-07 8 3 oy 640586-1" 926308-1' 640582-1! 926308-3" "B00 1-480706-0 1-480707-0 oO 720-1 350782-1 9 20.32 1-641769-08 1-641765-07 350720 50782 10 280 926302-1' 926309-1' 926302-3' 926309-3" 1.050 1-480708-0 1-480709-0 ee <1 <1 "? 26.67 1-641768-02 641764-12 350738 350788 15 aoe 1-480710-0 1-480711-0 350736-1 350784-1 In-Line style. 2Hausing material has 125C temperature rating. Lime green color. 12 Circuit cap black color, 3Taol Removable 21 For drawings, technical data or samples, contact your AMP sales engineer or calf the AMP Product Information Center: 1-800-522-6752. Dimensions are in inches and millimeters unless otherwise specitied. Values in brackets are metric equivatents. Specifications subject to change. Consult AMP for latest specifications. $10}938UU0) MOT-N-ALVIN [eSudAlUnsw Os - =e Ld k= <= c = Ss ww" kn o z= S = 22 AMP Soft Shell Catalog 82181 Pin and Socket Connectors Revised 7-97 Universal MATE-N-LOK Connectors (Continued) Recommended 110 Siyie Number of Dimensions Cap Housing jaD+| 2.79) Circuits A B C D E Panel Cutout ~ 9 565 340 095 -530 -250 av 21495864 2.411346 6.35 au i : : B15 340.095 530 250 View is from cap entry side 3 a0. 70 864 DAI 13.46 6.35 ag: se vats Note 3 1.065 340 095 .530 -250 pele v Application Specification oy 4 2708 864 at 1846635 . 5 1.315 340 .095 530 .250 Inting 88.40 86421 13.46 6.35 6 1.567 154.189 531 .394 F | Note a>! 39.80 3.91 480 13.49 10.0 E 8 2.067 154 189 531 394 \ ow 5250 8.91 4.80 13-49 1000 10 2.567 154.189 .530 .394 / 65.20 3.91 480 1346 10.0 Note 4 6 565 .480 275 1.030 .250 | 1435 1219 699 2616 635 175 9 815 480 .275 1.030 .250 (4.45) Matrix 20.70 12.19 6.99 26.16 6.35 Note 5 12 1.065 480 .275 1.030 .350 wo BOS 1219 6.89 26.16 8.89 15 1.315 480 .275 1.030 .350 33.40 1219 699 2616 8.89 Keying Plug IS 408-3320 Plug Housing Strain Reliefs IS 408-3320 Related Product Data Plug Housings pg. 21 Technical Documents pg. 16 and 91 Dimensions are for reference only. Notes: 1. Recommended panel thickness .030-.090 [.762-2.286]. Panel must be punched so that housing enters panel in same direction as the punch. 2. Optional Do not remove this material when keying cap housing to panel. 3. Circuit #1 location when using panel keying with 6, 9, 12 and 15 circuit Matrix housings. 4, Circuit #1 location when using panei keying with 2, 3, 4, 5, 6, 8 and 10 circuit In-Line housings. 5. .175 [4.45] dimension is .125 [3.18] for 6, 8 and 10 circuit In-Line housings. } i Part Numbers UL94V-2 Nyion material, natural color 1-640415-1 UL94V-0 Nylon material 1-640415-0 Note: Keying plug snaps into plug or cap housing 2,3, 4, 5, 6 and 8 Circuit, In-Line 6, 9, 12 and 15 Circuit, Matrix Bey, 2 Req'd/Assy. See Note _ 2 Reqd/Assy. See Note Wire Bundle Dia (2) #6x5/8 Lg Type B Pan head sheet __,. metal screws 530 B Pan head sheet 530 metal screws (13.46] {not supplied} Part Numbers UL94V-2 Nyion material, natural color 1-350589-0 UL94V-0 Nylon material 350811-1 (2) #6x5/8 Lg Type a ~ (not supplied) Part Numbers UL94V-2 Nylon material, natural color 1-350590-0 UL94V-0 Nylon material 350812-1 {13.46} Note: Strain retief part number represents one half of a strain relief. Two strain reliefs required per housing. For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product information Center: 1-800-522-6752 Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. Consult AMP far latest specifications.ANP Soft Shell Catalog 82181 Pin and Socket Connectors Revised 7-97 Plug or Cap Housing Strain Reliefs IS 408-3320 Related Product Data Housings pg. 21 Technical Documents pg. 16 and 94 Cap Housing Adapters These adapters are designed to anchor the cap housing strain reliefs to the housings and prevent the strain relief halves from drawing in when the screws are being torqued down to clamp the cable. IS 408-3320 For Ali Positions Except 2, 6 and 8 Circuit Cap Housings 630 [16.0] UL94V-2 Nylon material, natural color 641777-1 UL94V-0 Nylon material 641778-1 For 2 In-Line and 6 Matrix Circuit Cap Housings Only UL94V-2 Nylon material, natural color643182-1 UL94V-0 Nylon material 643182-2 Dimensions are for reference only. Universal MATE-N-LOK Connectors (Continued) 2, 3, 4, 5, 6, 8, 9, 12 and 15 Circuit (Enclosed) Enclosed Strain Relief 2 Req'd/Assy. (2) #6x5/8 Lg Type B Pan head sheet metal screws (not supplied) (2) #6x3/8 Lg Type B Pan head sheet metal screws (not supplied) In-Line Insert se Numero! gf, mse, inte wie, Mie Bunle TTSATZ Won. y gaa wre Natural Color O Nylon pe, eas owen grt No 200-.350 1-640719-1 640713-2 ; 1449 Yes RCE ns 1-640720-0 640714-4 No 200-350 641763-1 641945-1 ee In-Line No 200-350 641775-2 641776-2 > tggo tess eaten onan Ne __ Boe-a89 643030-2 643030-4 : 1700 Yes pion ee ns 6495854 643313-4 Note 5 No 200-350 643585-2 643313-2 0 200 P02"483 _ a Note 5 No 200-350 ~ 643314-2 6 130 Yes errs 1-640721-0 640715-1 vem 2 RY SRE store aor 12 1280 Yes jee ios 1-640723-0 640717-1 15 1580 Vegg {200-850 1.6407240 640718-1 Notes: +. Cable clamping insert comes attached to strain relief. It can be used to provide additional adjustment for small wire bundles or discarded. 2. Insert to be positioned as shawn by dotted lines. 3. Strain relief part number represents one-half of a strain relief. Two strain reliefs required per housing. 4. Must use cap housing adapters when attaching strain reliefs to a cap housing. Two adapters required per housing. 5. Strain reliefs for 6 and 8 position In-Line fits plug housings only. For drawings. technical data or samples. contact your AMP sales engineer or call the AMP Product Information Center: 1-800-522-6752. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. Consult AMP for latest specifications. 23 siopauuog MOT-N-ALVW [esiaalufMATE-N-LOK Connectors 24 AMP Connector Seals Product Facts m Economical splash proof/ immersible seated connec- tor system m No design changes to exist- ing Universal MATE-N-LOK product a Existing applications utiliz- ing Universal MATE-N-LOK can be upgraded to a splash proof system a Utilizes two wire seals and one interface seal m Wire AWG range is 20-14 [.5-2.0] with insulation diameter range .060-.130 [1.52-3.30] wm .110-.130 [2.79-3.30) insulation diameter passed European IP sealing level #5/7 (swirling dust/immersion to 1 meter for 30 minutes) w .060-.110 [1.52-2.79] insulation diameter passed European IP sealing level #5/6 (swirling dust/heavy seas} m Universal MATE-N-LOK II keying plug can be used to seal unused circuits a Primary application is for wire-to-wire, wire-to-board application must use a closed bottom header 2, 3, 4 Circuit, In-Line le A! .300 | aoe O-P) tT oT .300 Soft Shell ( Catalog 82181 Pin and Socket Connectors Revised 7-97 Universal MATE-N-LOK Connectors (Continued) Material Silicone rubber, biue color Technical Documents Product Specification 108-1031-1 Splash Proof Seal, Universal MATE-N-LOK Connectors Contacts pg. 25 Instruction Sheet 408-3392 Universal MATE-N-LOK Splash Proof Seals Plug Housing Contact Cavity Back Side (Wire End) seaing uy es oe ieee Re 2 -550 794269-1 794270-1 3 .800 794271-1 794272-1 4) 1.050 794273-1 794274-1 6 _ 794275-1 794276-1 9 -800 794277-1 794278-1 12! 1.050 794279-1 794280-1 15 1.300 794281-1 794282-1 Projected availability by Jan. 1998. Note: One interface seal and two wire seals required per mated assembly. 6 Circuit, Matrix 030 NGA i cox ew ES | wire t SS= an 74 interface SS y SS p 030 wire interface ' interface For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center: 1-800-522-6752. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. Consutt AMP for latest specificationsANP Soft Shell Pin and Socket Connectors Catalog 82181 Revised 7-97 Contacts used with Splash Proof Seals Solid pin diameter 084 [2.13] Split pin diameter .086 [2.18] Stock thickness .012 [.305} unless otherwise noted. These contacts can be used in either Universal MATE-N-LOK Connectors (Continued) iL- Universal MATE-N-LOK Plug or C oe be niversal -N- ug or Ca housings only 9 or wap Solid Pin Split Pin Solid Socket Related Product Data Product Specification 108-1031 Universal MATE-N-LOK Connectors Application Specification 114-1010 Universal MATE-N-LOK Contacts . _ Grounding Pin Pee (100 (2.54] longer than standard pin} or Mi first, b last, for i i Technical Documentspg. 16 and 91 (Mate Hyst: Break last, not for interrupting Application Tooling pg. 92-94 Housings pg. 21 Wire Size | . Contact Part Numbers HDM wane "Range, ag Material & Finish style Pin Socket Applicator Hand Toot {mmn?} Strip Form Loose Form Strip Form Loose Form Part No. Brass, Pre-tin 350218-1 350547-1 350536-1 350550-1 Brass, Gold! 350218-2 350547-2 350536-2 350550-2 Brass, Select Gold? Solid 350218-7 350547-7 350536-7 350550-7 .790 .760 Phos. Brz., Pre-tin 350218-3 350547-3 350536-3 350550-3 3 20-14 .060-.130 20.06 19.30 Phos. Brz., Select Gold? 350218-6 _350547-6 _350636-6 3505506 Garvey: googe2 [52.0] 1.52-3.30 Brass, Pre-tin 350687-1 _350705-1 687763-6 Brass, Gold Split 350687-2 350705-2 ~ Brass, Select Gold? 350687-7 350705-7 5 Brass, Pre-Tin Ground 350654-1 350669-1 Gold Finish Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact. 2Select Gold Finish Plated with .000030 [.000762] min. gald in mating area over .000050 [.00127] min. nickel underplate on entire contact. 3HDM Applicator part number ending in -1, is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine. -4 & -6 are used on AMP-O-LECTRIC Model G Machine. See page 95 for further information. Notes: 1. AMP recommends split pins be used in housings having 6, 9, 12 and 15 circuits to reduce mating force. 2. Phosphor bronze material contacts are available for use in high temperature/humidity cycling applications, consult AMP. 3. 18-24 AWG contacts page 19 can be used with splash proof seals if insulation diameter range is .O60-.100. UMNL I Keying Plug/ Splash Proof Sealing Plug (3.30) j._! IS 408-3392 _lo Cle. Part Number 2 e Ss UL94V-0 Nylon material 770377-1 SS, aod \ Related Product Data Housings pgs. 8, 9 and 10 Technical Documents pg. 16 and 91 LS> Contact Insertion Tool (For inserting Seal Latch Tool Contact Extraction Toot contacts applied to small diameter wire) No. 794381-1 No. 318851-1 No. 91002-1 IS 408-3392 {S 408-4371 IS 408-7347 Dimensions are for reference only. 25 For drawings. technical data or sampies, contact your AMP sales engineer or call the AMP Product Information Center: 1-800-522-6752. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. Consult AMP for latest specifications. $10}99UU09 MOT-N-ALVW [esiaaiuyConnectors Universal MATE-N-LOK ANP Soft Shell Pin and Socket Connectors PC Board Vertical Pin Headers 200 [6.35] Centerline spacing Material Housing - UL94V-2 Nylon, natura! color UL94V-0 Nylon Contacts Phosphor bronze Solder tail diameter .062 [1.57] Related Product Data Product Specification 108-1053 Universal MATE-N-LOK PC Board Headers Performance Characteristics pg. 16 and 17 Recommended PC Board Hole Layoutpg. 28 Technicai Documents pg. 16 and 91 Mating Connectors Universal MATE-N-LOK Plug Housings ~ pg. 21 Universal MATE-N-LOK I! Plug Housings ng. 8. 9 and 10 6, 9, 12 and 15 Circuit, Matrix Polarizing feature -175 Standard va | [4.45] oa .235 Long Tait | 550... 5.97] [13.97] cus oa A ol tL ww @ @_| |. 200_| [20.32] Dimensions are for reference only. 26 Universal MATE-N-LOK Connectors (Continued) Catalog 82181 Revised 7-97 2,3, 4,5, 6 and 8 Circuit, In-Line [4.45] -235 Long Tait [5.97] -175 Standard Tail 550_, | Polarizing feature ~~? =p 113.97] Pin Header Part Numbers Mates with Plug Numberof A Flammability Pin Housing Part Number Circuits Dim. Rating Finish Standard Standard Tail Long Tails (Using Socket Contacts) Tail? Polarized? Ong Val UMNL UMNL II Pre-tin 350428-1 641963-1 350582-1 UL94V-2 - . . _ 550 Duplex 350428-2 641960-2 a505a2.0 '480698-0 2 : 641964-4 oe : 13.97 Pre-tin 350786-1. - 787-1 UL94V-0 1-641964-14 380 8 350777-1 _770017-1 Duplex! 350786-2 641964-2 350787-2 Pre-tin 950429-1. 641965-1 350583-1 UL94V-2 _ ; 7 00 Duplex! 350429-2 0 360583-2 1 480700-0 3 ; 641966-1 7. 20.32 Pre-tin 350789-1 --.__ 350790-1 UL94V-0 1-641966-14 _ 350766-1 = 770018-1 Duplex 350789-2 350790-2 Pre-tin 350430-1 641967-1 350584-1 uLe4v-2 fa ; 4 1.050 Duplex! 350430-2 3605e4.2 14607020 26.67 Pre-tin 350792-1 641968-1 350793-1 UL94V-9 EE - - Duplex _350792-2 350703-2 2007791 770019-1 Pre-tin 640466-1 643405-1 UL94V-2 - - 4. 7 _ 5 1.300 Dupiex' 640466-2 _ 1-480763-0 33.02 ~ Pre-tin 640900-1 643406-1 See UL94v-0 - ne - . Duplex 640800-2 os a 350809-1 770016-1 6 1.550 UL94V-2 Pre-tin 641832-1643407-1 = ~ 6405 85-1 = - 39.37 UL94V-0 Pre-tin 641831-1 643408-1 640581-10<CCSti(itiiS 3 2.050 UL94V-2 Pre-tin 641825-1 770143-1 640586-1 52.07 UL94V-0 Pre-tin 641828-1 643410-1 ~ 640582-1 . Mates with Plug Numberof A Flammability Pin Pin Header Part Numbers Housing Part Number Circuits Dim. Rating ~ Finish Standard Standard Tail Long Tail (Using Socket Contacts) Tail? Polarized? ng Tal UMNL UMNL IT Pre-tin 350431-1 641969-1 350585-1 UL9g4V-2 to at ; _ Ps 550 Duplex 350431-2 360585.2 1 460704-0 13.97 Pre-tin 350711-1 641970-1 350732-1 . L94V-0 5- - U Duplex 350711-2. 641970-2 350732-2 S50715-1770020-4 Pre-tin 350432-1 641971-1 350586-1 UL94V-2 wee =. - 4-480706- _ _s _Duplex' 350432-2641971-2 _350586-2 480708 ; 9 oe Pre-tin 3507121 641972-1 _360742-1 , UL94V-0 641972-2 350720-1 770021-1 1 a, et . Duplex 3507122 je aaa 7 3507422 Pre-tin 350433-1 641973-1 | 350587-1 L94y-2 -480708- _ 1050 ~ v Duplex 350433-20 3505 87-2 ' 480708 0 12 : 641974-1 26.67 Pre-ti 50713-1 = 737-1 ursav.o Pret S078 aearazai 997971 aso7a5-1 7700221 Duplex 350713-2 641974-2 350737-2 Pre-tin 350434-1 641975-1 350588-1 L94V-2 - = 4-480710- 15 1.300 U Duplex! 350434-2 g50sea2 '480710-0 33.02 ~~ Pre-tin 350714-1 641976-1 350738-1 _ Loav- ne a - - UL94V-0 Duplex 350714-2 3e07ga-2 207961 770023-1 Duplex Finish Plated with .000030 [.000762] min. gold in mating area, matte tin-lead on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2Use Standard Tail for .062 [1.57] thick PC Board. 3Use Long Tail for 125 [3.18] thick PC Board. Black in color. For drawings, technical data or samples, cantact your AMP sales engineer or call the AMP Product information Center: 1-800-522-6752. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. Consult AMP for latest specifications.AMF Soft Shell Catalog 82181 Pin and Socket Connectors Revised 7-97 Universal MATE-N-LOK Connectors (Continued) PC Board Vertical 2,3, 4, 5, and 6 Socket Headers Circuit, In-Line Polarizing 250 [6.35] Centerline spacing feature Material 175 Standard Tail Hove Nyl tural cal 38 Long Tail 550. ~2 Nylon, natural color I i3.97f" UL94V-0 Nylon ee seri Contacts Phosphor bronze Mates with Plug Solder tail diameter .062 [1.57] Number of A Pin Header Part Numbers Flammability Socket Housing Part Number Circuits Dim. Rating Finish Standard Standard Tail 44, 9 Tails (Using Socket Contacts) Related Product Data Tal Polarized! UMNL UMNL Il ULoav.2 Pfertin _350759-4643411-1 _350986-4 Product Specification 9 .550 Duplex 350759-3 = = 1-480698-0 ~ 108-1053 Universal MATE-N-LOK 13.97 UL94V-0 Pre-tin 350824-1 643412-1 350831-1 PC Board Headers Buplex 350824-2 = ma 880777-1 770017-1 Performance Characteristics Pre-tin 350760-4 643413-1 350987-4 UL94V-2 - 7 _ pg. 16 and 17 3 800 8 Duplex 350760-3 _ 1-480700-0 Recommended PC Board Hole Layout 20,32 UL94v-0 Pre-tin 350825-1 6439414-1 350832-1 350766-1 770018-1 pg. 28 Duplex' 350825-2 643414-2 350832-2 " . / Pre-tin 350761-4 643415-1 350988-4 uLg4V-2 7 Technical Documents pg. 16 and 91 4 4.050 Duplex 350761-3 = a509a8.3 1 480702-0 . 26.67 Pre-ti = - - Mating Connectors ULe4V-0 Sunes ee oaetre: scons 350779-1 770019-1 bniversal MATE N-LOK UL94V-2Pre-tin 640467-1 _ 1-480763-0 = Ug rousings ~~ pg. 5 Boos uLoay.o _Pre-tin 640901-1 = : Univeral MATE-N-LOK lI Dupiex 6409012 3508094 7700164 lug Housings-pg. 8, 9 and 10 9 GSpg 6 4903 UL94V-0 Duplex 770262-2 _ _ 640581-1 ~ 6,9, 12 and 15 Polarizing Circuit, Matrix feature 175 Standard Tail |_| [4.45} - .235 Long Tait ig -550_,| (20.32) [5.97] " [13.97] Number of A Flammability Socket Pin Header Part Numbers Housing Part Number Circuits Dim. Rating Finish Standard Standard Tail | 449 qajys (Using Socket Contacts) Tail? Polarized? 9 UMNL UMNL Il Pre-tin 350762-4 643423-1 350989-4 . UL94V- - a 6 550 2 Duplex 350762-3 350989-3 1-480704-0 13.97 Pre-tin 350827-1 643424-1 350834-1 ULSAV-0 Duplex _350827-2 64g4z4-2 a5oaag-2 711 7700201 Pre-tin 350763-4 643425-1 350990-4 UL94V-2 - . _ 9 .800 Ls Duplex 350763-3 _ 350990-3 1-480706-0 20.32 Pre-tin 350828-1 643426-1 350835-1 L! a a he - ULO4V-0 Duplex 350828-2 643426-2 -350835-2 350720-1770021-1 Pre-tin 350764-4 350991-4 4V-2 4. 12 1.050 ULe Duplex' 350764-3 _ 350991-3 1-480708-0 26.67 Pre-tin 350829-1 643428-1 350836-1 a ULO4V-0 Duplex 360820-2 asoage> 900735-1-770022-1 Pre-tin 350765-4 643429-1 350992-4 AV-2 : ~ 4-480710- 15 1.300 ULS Dupiex' 350765-3 _ _ 1-480710-0 33.02 Pre-tin 350830-1 643430-1 350837-1 Lo4v- 7 7 UL94V-0 Duplex 360830-2 Beoag7.o 300736-1 770028-1 Dimensions are for reference only. Duplex Finish Plated with .000030 [.000762] min. gold in mating area, matte tin-lead on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2Use Standard Tail for .062 [1.57] thick PC Board. 3Use Long Tail for 125 [3.18] thick PC Board. 27 For drawings, technical data or samples, contact your AMP sales engineer or calf the AMP Product Information Center: 1-800-522-6752 Dimensions are in inches and mitlimeters unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. Consult AMP for latest specifications. $10}I9UU09 MOT-N-ALVW [esuaayufyConnectors Universal MATE-N-LOK 28 AMP Soft Shell ( Catalog 82181 Pin and Socket Connectors Revised 7-97 Recommended PC Board Hole Layout for Pin and Socket Vertical Headers Related Product Data Vertical Headers pg. 26 and 27 PC Board Vertical Pin Headers with ACTION PIN Contacts Material Housing P87, biack Flammability Rating UL94V-0 Contacts Copper alloy, plated with tin-lead over nickel on entire contact Related Product Data Performance Characteristics pg. 17 Technical Documents pg. 16 and 91 Mating Connectors Universal MATE-N-LOK Plug Housings ~~ pg. 21 Universal MATE-N-LOK II Plug Housings pg. 8 and 10 Dimensions are for reference only. Universal MATE-N-LOK Connectors (Continued) 2, 3, 4, 5, 6 and 8 aa >| 25 Typ. Circuit, In-Line TO oe t I 78 yp: Polarizing Hole pre we See Note i | i No. 1 Position ~ | 2 Circuit | | 3 Circuit ---! | 4 Circuit >| | ie 5 Circuit >| o= 6 Circuit ->| <--- 8 Circuit! > Polarizing Hole Polarizing Hole 250 seenee 175 See Note . - s 0 Type] <J __ 175 (6.35) YP" y (4.45) 6, 9, 12 and 15 i525 y 445) | GENS. 2 Circuit Circuit, Matrix No. 2 Circuit wo +o. 1 No. 1 Circuit r Ra 16.35] YP No. 1 Circuit {6.35} wees 070 \ 070 Dia. Typ. 11.78} Dia. Typ. [1.78] 175 2! 475 a : [6.35] 'P- i mT a45] 16.35)'YP [4.45] Wg & ,~Polarizing Hole as Polarizing Hole a See Note _. 1 See Note A A . <~ No. 2 Circuit ' =No. 2 Circuit -250 rte : (6.35) Y?- wo irc 250 55 rou 070 bia T No. 1 Circuit (6.35) ' YP 070 5, Typ No- 1 Circuit 11.78] YP. (7a) SYP Note: Polarizing hole .070 [1.78] Dia. required for polarized headers only. = .250 <= [6.35] pat to A = be (| => TE? aa I. | : >| 299 200 + 004 - 630 4, 7.59} [5,080.10 Y* r16.00)M Number of : Mates with Housing Circuits ADim. PartNumber bt jumber (Using Socket Contacts) UMNL UMN II .750 + 1-480698-0 2 igo5 173924-1 3507771 770017-1 1.060 * 1-480700-0 3 25 40 173925-1 350766-1 770018-1 1.250 * 1-480702-0 4 31.75 173926-1 350779-1 770019-1 Note: Install in PC Board with arbor press. *UL recognition pending. \- 4 Circuit | | et 2 Circuit ml to -6-68-96-9~ PPP PEP RE -100 + 004 | ~ [2.54+0.10] | . 200 004 [0.84 = 0.05] ty {0.03-0.08} [5.08 * 0.10] 038 a 9003-0012 [0.97 = 0.03] a, [0.01-0.03} Recommended PC Board Hole Layout PC Board Hole Dimensions For drawings, technica! data or samples, contact your AMP sales engineer or call the AMP Product tnformation Center: 1-800-522-6752. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Specifications subject to change. Consult AMP for latest specifications.AMP Soft Shell Catalog 82181 Pin and Socket Connectors Revised 7-97 Universal MATE-N-LOK Connectors (Continued) PC Board Right Angle 2, 3, 4, 5, 6 and 8 Circuit, In-line Pin and Socket Headers 250 [6.35] Centerline spaci Om 150 1, enterline spacing e 28009 wp gan Material : i TEN A, 4 Housing Nyion ; fot + Eh s00 Contacts Phosphor bronze No. 1 Circuit " 635) ees Solder tail width 052 [1.32] Related Product Data Product Specification 108-1053 Universal MATE-N-LOK PC Board Headers Performance Characteristics pg. 16 and 17 Technical Documents pg. 16 and 91 Mating Connectors Universal MATE-N-LOK Plug Housings pg. 24 Universal MATE-N-LOK II Plug Housings pg. 8 and 10 Test Connectors ant i -290 | Typ. [7.37] oe c | Use 6-32 UNC Pan Head Screw 3/8 [9.53] long for mounting (Not Supplied) Recommended PC Board Hole Layout (4.08] [9.14] ,062 [1.57] Board Thickness Right Angle Header Part Numbers Number of __ Dimensions Contact UL94V-2 UL94V-0 Circuits A B Finish Pin Mates with Pin Socket Mates with UMNL UMNL II 550 1.245 .830 Pre-tin 770994-1 1-350942-0 643226-1 2 - 0 eer - - 13.97 31.62 21.08 Duplex 1-480698-0 soa S807 77-1 770017-1 .800 1.495 1.080 Pre-tin ~ 1-950943-0 643228-1 3 _ - ~ 20.32 37.97 27.43 Duplext 2-350943-0 643228-2 907661 770018-1 1.050 1.745 1.330 FPre-tin 1-350948-0 1-950944-0 643230-1 4 1-4 gAS OOo . 7 26.67 44.32 33.78 Duplex 80702-0 2-350944-0 6432302 350779-1 770019-1 4.300 1.995 1.580 Pre-tin 1-350949-0 1-350945-0 643232-1 5 1-4 . ET rv - . 33.02 50.67 40.13 Duplex 80763-0 2.350045-0 649232. 350809-1 770016-1 1.550 2.245 1.830 Pre-tin 640587-1 640583-1 643234-1 6 =. - _ 39.37 7.02 46.48 Duplext 640585-1 ~~ G40883-2 6490342 10081! 8 2.050 2.745 2.330 _Pre-tin _ _ 640584-1 643236-1 640582-1 52.07 69.72 5918 Duplex 3408842 6430562 _ Duplex Finish Plated with .000030 [.000762] min. gold in mating area, matte tin-lead on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. (with spring loaded 2,3, 4and 5 Circuit, contacts) In-Line Material Housing Nylon Flammability Rating UL94V-0 . ; Plug Cap Related Product Data 6, 9, 12 and 15 Circuit, 084 [2.13] Dia. Pin Mating Connectors Housings and Matrix Universal headers having the same number of MATE-N-LOK circuits. The housings can have pin or Sockets socket contacts, or a combination of both. Mating Housings pg. 21 Mating Headers pg. 26, 27 and 28 Other Mating Connectors Universal MATE-N-LOK !! Housings pg. 8. 9 and 19 Number of Part Numbers Notes: Circuits Plug Cap 1. Test probes have 5 amp maxi- 2 350848-2 350849-2 mum current rating. 1,000,006 3 350848-3 350849-3 cycles. 4 350848-4 350849-4 2. Test Connector housings are of 5 350848-5 350849-5 the same configuration as stan- 6 350848-6 350849-6 dard housings. Refer to page 21 9 350848-9 350849-9 for dimensional specifications. 12 1-350848-2 7-350849-2 Dimensions are for reference only. 15 1-350848-5 1-350B49-5 29 For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center: 1-800-522-6752. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Specifications subject ta change. Consult AMP for latest specifications. $10)I9UU09 MOT-N-JLVIN [ESJ9AIUN)