Data Brief
For further information contact your local STMicroelectronics sales office.
November 2007 Rev 1 1/4
4
STEVAL-ILL003V2
High brightness 32-LED evaluation board without diagnostic
based on the STP16CP05 LED driver
Features
32 LED matrix driven by STP16CP05
LED current regulation
Adjustable brightness
Animated text capability
Adjustable blinking speed; several blinking
modes
Input voltage ranges from 5 V to 35 V input
voltage range
DC-DC converter for high efficiency
Description
This evaluation board represents a cost effective
solution to drive an array of high brightness LEDs,
using the LED driver STP16CP05. This driver
provides the same constant current for each of its
output channels, thus there is no difference in
brightness and color between the LEDs.
STEVAL-ILL003V2
www.st.com
Board schematic STEVAL-ILL003V2
2/4
1 Board schematic
Figure 1. Schematic
VCC
VCC
VCC
VCC
VCC
VCCVCC
VCC
C10
100uF/16V
C10
100uF/16V
R3
10K
R3
10K D26D26
6
8
2
4
3
7
5
1
IO5 L5970DIO5 L5970D
D4D4 D8D8
+
C11
220uF/16V
+
C11
220uF/16V
D22D22D2D2
D33
GREEN LED
D33
GREEN LED
J1J1
R5
6k8
R5
6k8
J4J4
R7
4k7
R7
4k7
C6
100nF
C6
100nF
D25D25
C2
100nF
C2
100nF
D29D29 D31D31
Vss
1
Vdd
2
RESET
3
AIN0
4
SCK
5
AIN2
6
MOSI
7
CLKIN
8PA7 9
ICCCLK 10
ICCDATA 11
NC 12
NC 13
PWM 14
NC 15
PA0 16
IO1
ST7LITE09
IO1
ST7LITE09
D23D23D20D20D18D18
Vin
8
Gnd
2
Gnd
3
Gnd
6
Gnd
7
Inhib
5
Vout 1
IO4 L78L33
IO4 L78L33
D28D28D10D10
C1
100nF
C1
100nF
D15D15
12
3
P1
10K
P1
10K
D14D14 D30D30
OUT0
5
OUT1
6
OUT2
7
OUT3
8
OUT4
9
OUT5
10
OUT6
11
OUT7
12 OUT8 13
OUT9 14
OUT10 15
OUT11 16
OUT12 17
OUT13 18
OUT14 19
OUT15 20
GND
1
SDI
2
CLK
3
/LE
4/OE 21
SDO 22
R-EXT 23
Vdd 24
IO3
STP16CPS05
IO3
STP16CPS05
D5D5 D7D7 D12D12
C5
100nF
C5
100nF
D1D1
J3J3
C7
220pF
C7
220pF
D3D3
1
2
3
J5 CON3J5 CON3
C4
10nF
C4
10nF
12
3
P2
10K
P2
10K
R6
3k
R6
3k
C9
10uF/35V C9
10uF/35V
D6D6 D11D11 D21D21
R4
560
R4
560
R1
1K2
R1
1K2
D9D9
21
L1 33uFL1 33uF
1 2
3 4
5 6
7 8
9 10
ICCICC
D27D27D13D13 D24D24
OUT0
5
OUT1
6
OUT2
7
OUT3
8
OUT4
9
OUT5
10
OUT6
11
OUT7
12 OUT8 13
OUT9 14
OUT10 15
OUT11 16
OUT12 17
OUT13 18
OUT14 19
OUT15 20
GND
1
SDI
2
CLK
3
/LE
4/OE 21
SDO 22
R-EXT 23
Vdd 24
IO2
STP16CP05
IO2
STP16CP05
C8
22nF
C8
22nF
D32D32D16D16
C3
100nF
C3
100nF
J2J2
D19D19
R2
1K2
R2
1K2
D34
STPS340U
D34
STPS340U
1
43
2
S1
Switch
S1
Switch
D17D17
STEVAL-ILL003V2 Revision history
3/4
2 Revision history
Table 1. Document revision history
Date Revision Changes
28-Nov-2007 1 Initial release
STEVAL-ILL003V2
4/4
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, an
y
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
STMicroelectronics:
STEVAL-ILL003V2