To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT PC24A00 Series THREE TERMINAL LOW DROPOUT VOLTAGE REGULATOR DESCRIPTION The PC24A00 series is a low dropout voltage three terminal regulator that has realized a minimum voltage differential between the I/O of no more than 1 V when the output current is 2 A through the employment of a PNP transistor at the output stage. Due to its ability to achieve a greater reduction in the power loss compared with conventional three-terminal regulators, the PC24A00 series is ideal for use as the secondary side smoothing circuit of a power supply. FEATURES * Output current in excess of 2 A * High accuracy output voltage: VO = 2% MAX. (TJ = 25C, IO = 1 A) * Low dropout voltage: VDIF = 1 V MAX. (IO = 2 A) * On-chip thermal shut down circuit, over-current protection circuit and safe operating area protection circuit ORDERING INFORMATION Part Number Package Output Voltage PC24A05HF 3-pin plastic SIP (MP-45G) (Isolated TO-220) 5V PC24A12HF 3-pin plastic SIP (MP-45G) (Isolated TO-220) 12 V PC24A15HF 3-pin plastic SIP (MP-45G) (Isolated TO-220) 15 V PIN CONFIGURATION (Marking Side) 3-pin plastic SIP (MP-45G) PC24A05HF, 24A12HF, 24A15HF 1 2 3 1: INPUT 2: GND 3: OUTPUT The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. G14632EJ4V0DS00 (4th edition) Date Published March 2003 NS CP(K) Printed in Japan The mark shows major revised points. 2000 PC24A00 Series BLOCK DIAGRAM INPUT Safe operating area protection Start-up circuit Reference voltage Error Amp. Drive circuit OUTPUT Thermal shut down Over-current protection GND ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Input Voltage Symbol VIN Rating Unit -0.3 to +36 V 20 Note Internal Power Dissipation PT W Operating Ambient Temperature TA -20 to +85 C Operating Junction Temperature TJ -20 to +150 C Storage Temperature Tstg -55 to +150 C Thermal Resistance (Junction to Case) Rth(J-C) 5 C/W Thermal Resistance (Junction to Ambient) Rth(J-A) 65 C/W Note Internally limited. When the operating junction temperature rises up to 150C, the internal circuit shuts down the output voltage. Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any parameter. That is, the absolute maximum ratings are rated values at which the product is on the verge of suffering physical damage, and therefore the product must be used under conditions that ensure that the absolute maximum ratings are not exceeded. 2 Data Sheet G14632EJ4V0DS PC24A00 Series TYPICAL CONNECTION D1 PC24A00 Series INPUT OUTPUT + CIN D2 COUT CIN: 0.1 F or higher. Set this value according to the length of the line between the regulator and INPUT pin. Be sure to connect CIN to prevent parasitic oscillation. Use of a film capacitor or other capacitor with excellent voltage and temperature characteristics is recommended. If using a laminated ceramic capacitor, it is necessary to ensure that CIN is 0.1 F or higher for the voltage and temperature range to be used. COUT: 47 F or higher. Be sure to connect COUT to prevent oscillation and improve excessive load regulation. Place CIN and COUT as close as possible to the IC pins (within 2 cm). Also, use an electrolytic capacitor with low impedance characteristics if considering use at sub-zero temperatures. D1: If the OUTPUT pin has a higher voltage than the INPUT pin, connect a diode. D2: If the OUTPUT pin has a lower voltage than the GND pin, connect a Schottky barrier diode. RECOMMENDED OPERATING CONDITIONS Parameter Input Voltage Symbol VIN Condition MIN. TYP. MAX. Unit PC24A05HF 6 9 15 V PC24A12HF 13 18 22 V PC24A15HF 16 22 25 V Output Current IO All 0 2 A Operating Junction Temperature TJ All -20 +125 C Caution The recommended operating range may be exceeded without causing any problems provided that the absolute maximum ratings are not exceeded. However, if the device is operated in a way that exceeds the recommended operating conditions, the margin between the actual conditions of use and the absolute maximum ratings is small, and therefore thorough evaluation is necessary. The recommended operating conditions do not imply that the device can be used with all values at their maximum values. Data Sheet G14632EJ4V0DS 3 PC24A00 Series ELECTRICAL CHARACTERISTICS PC24A05 (TJ = 25C, VIN = 9 V, IO = 1 A, unless otherwise specified) Parameter Output Voltage Symbol Conditions VO 0C TJ 125C, MIN. TYP. MAX. Unit 4.9 5.0 5.1 V 5.15 V 50 mV 4.85 6 V VIN 15 V, 5 mA IO 2 A Line Regulation REGIN 6 V VIN 15 V Load Regulation REGL 5 mA IO 2 A 3 50 mV Quiescent Current IBIAS IO = 0 A 3 5.0 mA IO = 2 A 15 30 mA 20 mA 6 Quiescent Current Change IBIAS 6 V VIN 15 V, IO = 2 A Output Noise Voltage Vn 10 Hz f 100 kHz Ripple Rejection R*R f = 120 Hz, 6.5 V VIN 16.5 V Dropout Voltage VDIF 0C TJ 125C, IO = 2 A Peak Output Current IOpeak VIN = 9 V Short Circuit Current IOshort VIN = 15 V 1.3 A Temperature Coefficient of VO/T 0C TJ 125C, IO = 5 mA 0.5 mV/C 50 2.8 150 Vr.m.s. 60 dB 3.5 1.0 V 4.2 A Output Voltage PC24A12 (TJ = 25C, VIN = 18 V, IO = 1 A, unless otherwise specified) Parameter Output Voltage Symbol Conditions VO 0C TJ 125C, MIN. TYP. MAX. Unit 11.75 12.0 12.25 V 12.35 V 11.65 13 V VIN 22 V, 5 mA IO 2 A Line Regulation REGIN 13 V VIN 22 V 12 100 mV Load Regulation REGL 5 mA IO 2 A 6 100 mV Quiescent Current IBIAS IO = 0 A 3 5.0 mA IO = 2 A 15 30 mA 20 mA Quiescent Current Change IBIAS 13 V VIN 22 V, IO = 2 A Output Noise Voltage Vn 10 Hz f 100 kHz Ripple Rejection R*R f = 120 Hz, 13.5 V VIN 23.5 V Dropout Voltage VDIF 0C TJ 125C, IO = 2 A Peak Output Current IOpeak VIN = 18 V Short Circuit Current IOshort VIN = 15 V 1.4 A Temperature Coefficient of VO/T 0C TJ 125C, IO = 5 mA 1.0 mV/C Output Voltage 4 Data Sheet G14632EJ4V0DS 43 2.8 220 Vr.m.s. 50 dB 3.5 1.0 V 4.2 A PC24A00 Series PC24A15 (TJ = 25C, VIN = 22 V, IO = 1 A, unless otherwise specified) Parameter Output Voltage Symbol Conditions VO 0C TJ 125C, MIN. TYP. MAX. Unit 14.7 15.0 15.3 V 15.45 V 14.55 16 V VIN 25 V, 5 mA IO 2 A Line Regulation REGIN 17 V VIN 25 V 18 150 mV Load Regulation REGL 5 mA IO 2 A 10 150 mV Quiescent Current IBIAS IO = 0 A 3 5.0 mA IO = 2 A 15 30 mA 20 mA Quiescent Current Change IBIAS 17 V VIN 25 V, IO = 2 A Output Noise Voltage Vn 10 Hz f 100 kHz Ripple Rejection R*R f = 120 Hz, 17 V VIN 27 V Dropout Voltage VDIF 0C TJ 125C, IO = 2 A Peak Output Current IOpeak VIN = 22 V Short Circuit Current IOshort VIN = 16 V 1.4 A Temperature Coefficient of VO/T 0C TJ 125C, IO = 5 mA 1.6 mV/C 40 2.8 260 Vr.m.s. 48 dB 3.5 1.0 V 4.2 A Output Voltage Data Sheet G14632EJ4V0DS 5 PC24A00 Series TYPICAL CHARACTERISTICS (Reference Values) VO vs. TJ PT vs. TA 20 150 VO - Output Voltage Deviation - mV 15 k n tsi ea PT - Total Power Dissipation - W h te ini inf ith W PC24A15 10 5 Without heat sink 1.92 0 0 85C 100 PC24A12 50 PC24A05 0 -50 -100 -150 IO = 5 mA -200 -50 50 100 150 TA - Operating Ambient Temperature - C 0 50 100 150 TJ - Operating Junction Temperature - C VO vs. VIN ( PC24A05) VO vs. VIN 6 20 IO = 5 mA 1A 2A 4 VO - Output Voltage - V VO - Output Voltage - V 5 3 2 PC24A15 15 PC24A12 10 PC24A05 5 1 TJ = 25C IO = 2 A TJ = 25C 0 0 1 2 3 4 5 6 VIN - Input Voltage - V 7 0 8 0 5 IBIAS vs. VIN 20 IOpeak vs. (VIN-VO) 5 250 TJ = 25C IO = 2 A TJ = 0C IOpeak - Peak Output Current - A IBIAS - Quiescent Current - mA 10 15 VIN - Input Voltage - V PC24A15 200 150 100 PC24A12 50 4 25C 3 125C 2 1 PC24A05 0 0 5 10 15 20 0 VIN - Input Voltage - V 6 0 5 10 15 (VIN-VO) - Input/Output Voltage Differential - V Data Sheet G14632EJ4V0DS 20 PC24A00 Series VDIF vs. IO R*R vs. f 80 Vo = 2% R*R - Ripple Rejection - dB VDIF - Dropout Voltage - V 1.2 1.0 0.8 TJ 0.6 = 5 12 C 25 C 0.4 0.2 0 TJ = 25C IO = 1 A 70 60 PC24A05 50 40 30 PC24A12 20 PC24A15 10 0 0.5 1.0 1.5 IO - Output Current - A 2.0 0 10 Data Sheet G14632EJ4V0DS 100 1k 10 k f - Frequency - Hz 100 k 7 PC24A00 Series PACKAGE DRAWING (Unit: mm) 3PIN PLASTIC SIP (MP-45G) A N E P B I L M D 1 2 3 K Y V J H U Z C F G M NOTE ITEM Each lead centerline is located within 0.25 mm of its true position (T.P.) at maximum material condition. MILLIMETERS A B 10.00.2 7.00.2 C 1.500.2 D E 17.00.3 3.30.2 F 0.750.10 G 0.25 H 2.54 (T.P.) I 5.00.3 J K 2.460.2 5.00.2 L 8.50.2 M 8.50.2 N 4.50.2 P U V 2.80.2 2.40.5 0.650.10 Y Z 8.90.7 1.300.2 P3HF-254B-4 8 Data Sheet G14632EJ4V0DS PC24A00 Series RECOMMENDED SOLDERING CONDITIONS When soldering this product, it is highly recommended to observe the conditions as shown below. If other soldering processes are used, of if the soldering is performed under different conditions, please make sure to consult with our sales offices. For more details, refer to below our document. "Semiconductor Device Mounting Technology Manual (C10535E)" Type of Through-Hole Device PC24A05HF, PC24A12HF, PC24A15HF: 3-PIN PLASTIC SlP (MP-45G) (Isolated TO-220) Process Wave Soldering Conditions Solder temperature: 260C or below, Flow time: 10 seconds or less. (Only to leads) Caution Apply wave soldering only to the pins and be careful not to bring solder into direct contact with the package. Data Sheet G14632EJ4V0DS 9 PC24A00 Series CAUTION ON USE * The PC24A00 series, if the output is short-circuited at VIN 20 V, the output may not be restored after the short-circuit is cancelled. In this case, restore the output by lowering and then reapplying VIN. * If a lower than recommended input voltage is used in the PC24A00 series, a large circuit current will flow due to the saturation of the output stage transistor (refer to the IBIAS vs. VIN curves in TYPICAL CHARACTERISTICS). The capacitance for the input side power supply therefore needs to be only enough to enable the current to flow in this circuit at startup. Note also that a resistor cannot be inserted at the GND pin to adjust the output voltage. 10 Data Sheet G14632EJ4V0DS PC24A00 Series REFERENCE DOCUMENTS Quality Grades on NEC Semiconductor Devices (C11531E) Semiconductor Device Mounting Technology Manual (C10535E) Semiconductors Selection Guide (X10679E) Semiconductor Selection Guide -Products and Packages- (X13769X) * The information in this document is current as of March, 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1