For more Information
please call
1-800-Belden1
General Description:
14 AWG solid .064" bare copper-covered steel conductor, plenum, foam FEP insulation, Duofoil® (100%
coverage) + TC braid shields (60% and 40% coverage), FEP jacket.
Physical Characteristics (Overall)
Conductor
AWG:
# Coax AWG Stranding Conductor Material Dia. (mm)
114 Solid BCCS - Bare Copper Covered Steel 1.6256
Total Number of Conductors: 1
Insulation
Insulation Material:
Insulation Trade Name Insulation Material Dia. (mm)
Teflon® FFEP - Foam Fluorinated Ethylene Propylene 7.112
Outer Shield
Outer Shield Material:
Layer # Outer Shield Trade Name Type Outer Shield Material Coverage (%)
1Duofoil® Tape Aluminum Foil-Polyester Tape-Aluminum Foil 100
2Braid TC - Tinned Copper 60
3Duofoil® Tape Aluminum Foil-Polyester Tape-Aluminum Foil 100
4 Braid TC - Tinned Copper 40
Outer Jacket
Outer Jacket Material:
Outer Jacket Trade Name Outer Jacket Material
Teflon® FEP - Fluorinated Ethylene Propylene
Overall Cable
Overall Nominal Diameter: 9.830 mm
Mechanical Characteristics (Overall)
Operating Temperature Range: -70°C To +200°C
Non-UL Temperature Rating: 200°C
Bulk Cable Weight: 145.844 Kg/Km
Max. Recommended Pulling Tension: 1049.775 N
Min. Bend Radius/Minor Axis: 101.600 mm
Applicable Specifications and Agency Compliance (Overall)
Applicable Standards & Environmental Programs
NEC/(UL) Specification: CMP, CL2P
CEC/C(UL) Specification: CMP
EU Directive 2011/65/EU (ROHS II): Yes
EU CE Mark: Yes
EU Directive 2000/53/EC (ELV): Yes
Page 1 of 3 10-30-2013
Detailed Specifications & Technical Data
METRIC MEASUREMENT VERSION
1153A Coax - CATV Cable
EU Directive 2002/95/EC (RoHS): Yes
EU RoHS Compliance Date (mm/dd/yyyy): 04/01/2005
EU Directive 2002/96/EC (WEEE): Yes
EU Directive 2003/11/EC (BFR): Yes
CA Prop 65 (CJ for Wire & Cable): Yes
MII Order #39 (China RoHS): Yes
Series Type: Series 11
Flame Test
UL Flame Test: NFPA 262
CSA Flame Test: FT6
Plenum/Non-Plenum
Plenum (Y/N): Yes
Electrical Characteristics (Overall)
Nom. Characteristic Impedance:
Impedance (Ohm)
75
Nom. Inductance:
Inductance (µH/m)
0.305133
Nom. Capacitance Conductor to Shield:
Capacitance (pF/m)
53.1522
Nominal Velocity of Propagation:
VP (%)
82
Nominal Delay:
Delay (ns/m)
4.06844
Nom. Conductor DC Resistance:
DCR @ 20°C (Ohm/km)
36.091
Nominal Outer Shield DC Resistance:
DCR @ 20°C (Ohm/km)
5.9058
Nom. Attenuation:
Freq. (MHz) Attenuation (dB/100m)
10.6562
10 1.27959
50 3.9372
100 5.5777
200 8.2025
400 11.4835
700 15.0926
900 17.3893
1000 18.3736
Max. Operating Voltage - UL:
Voltage
300 V RMS
Minimum Structural Return Loss:
Description Freq. (MHz) Start Freq. (MHz) Stop Freq. (MHz) Min. SRL (dB)
Page 2 of 3 10-30-2013
Detailed Specifications & Technical Data
METRIC MEASUREMENT VERSION
1153A Coax - CATV Cable
5400 20
Notes (Overall)
Notes: Sweep tested 5 MHz to 400 MHz. For use in indoor plenum environments but also suitable for outdoor and underground
applications. Teflon® is a registered trademark of E. I. duPont de Nemours and Co. used under license by Belden, Inc.
Put Ups and Colors:
Item # Putup Ship Weight Color Notes Item Desc
1153A A8R1000 305 MT 48.081 KG BEIGE, SNOW C #14 FFEP DBL SH FEP
1153A A8R500 152 MT 23.814 KG BEIGE, SNOW C #14 FFEP DBL SH FEP
Notes:
C = CRATE REEL PUT-UP.
Revision Number: 1 Revision Date: 08-21-2012
© 2013 Belden, Inc
All Rights Reserved.
Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications
described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not
ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express,
statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or
exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,
negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the
compliance date may be in stock at Belden facilities and in our Distributor’s inventory. The information provided in this Product Disclosure, and
the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden’s knowledge,
information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide
for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not
to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for
determining the applicability of legislation and regulations based on their individual usage of the product.
Belden declares this product to be in compliance with EU LVD (Low Voltage Directive 73/23/EEC), as amended by directive 93/68/EEC.
Page 3 of 3 10-30-2013
Detailed Specifications & Technical Data
METRIC MEASUREMENT VERSION
1153A Coax - CATV Cable
