Data Sheet of Expansion Shield x600 for Raspberry Pi B+/2B/3B (DFR0450)
INTRODUCTION
The X600 Expansion Shield is a highly cost-effective multimedia hat compatible with the Raspberry Pi Model
B+, Raspberry Pi 2 Model B and newest Raspberry Pi 3 Model B. It uses an HDMI audio solution to give high-
definition clear sound quality. It decodes and separates voices from HDMI signal, completely solving the poor
quality problem with Raspberry Pi integrated sound card.
The hat supports digital audio 5.1 channel output and 2.0 channel analog audio output, supports Dolby digital
AC-3, DTS, LPCM and other digital audio format outputs. Use your Raspberry Pi as a multimedia player,
lossless audio player or a network radio. We recommend OS images such as Raspbian, Volumio, OSMC,
PiMusicBox, etc.
*Note: Raspberry Pi is not included in the box.
SPECIFICATION
Input Voltage
6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi and
SATA device
Audio & Video
Allows you to extract audio signals from HDMI of your Raspberry Pi
Zhiwei Robotics Corp.
Delivery Intelligence
Add: Rm 615, Bldg Y1, No 112, Liangxiu Rd, Shanghai China
Tel： 021-61630503
Fax： 021-61001657
DATE: 2017/5/5
Zhiwei Robotics Corp.
Converts HDMI audio to digital optical or Coaxial or stereo RCA analog
The SPDIF optical or coaxial audio output supports all audio formats up to 5.1CH Dolby Digital
5.1CH / AC3 & DTS 5.1CH audio
Extracts digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH
analog stereo output through its RCA style L/R analog output or earphone jack
Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH
Maintains surround format when converting to digital optical audio
Supports high definition input up to 1080p@ (24/60) Hz, output resolution follows input
Supports HDMI signal amplification and equalization output for repeater function
HDMI output supports all audio formats including more advanced Dolby Digital Plus,
PCM5.1CH and beyond
SATA
Allows you to connect SATA devices to your Raspberry Pi
Wireless
Built in IR sensor (38KHz)
Misc
Power output socket
Directly connected on top of the Raspberry Pi using the board GPIO header pins
Solderless and no wires required
Extra 40-pin header of the R-Pi in order to support existing expansion boards
Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 ModelB NEW!
Dimensions
85 x 56mm (Same size as Raspberry Pi)
DOCUMENTS
Driver Download and User Manual
SHIPPING LIST
X600 expansion board x1
Nylon spacers (M3 x 20mm) x4
Nylon screws (M3 x 6mm) x8
USB adapter x1
HDMI adapter x1
Zhiwei Robotics Corp.
