Additional Resources: Product Page | 3D Model | PCB Footprint date 02/19/2020 page 1 of 4 SERIES: CSXX05B DESCRIPTION: CURRENT SENSOR FEATURES * * * * open loop bipolar detects current direction single channel MODEL rated current (If) linearity range1 (Im) (ARMS) (APEAK) CS0305B 3 3 CS0505B 5 5 CS1005B 10 10 CS1505B 15 15 CS2005B 20 20 Notes: 1. Im is the maximum peak current for which the output voltage specifications are guaranteed, however the If RMS rating must not be exceeded. 2. All specifications measured at 25C, Rl=10 k, unless otherwise noted. 3. It is recommended to add a 1 F capacitor connected between the common terminal 4 and the +5 V terminal 1 to avoid noise problems. SPECIFICATIONS parameter conditions/description min typ max units 4.75 5.00 5.25 V 25 mA at +If at -If 4.47 0.47 4.50 0.50 4.53 0.53 V V after demagnetization 2.47 2.50 2.53 V supply voltage (Vcc) max current consumption (Ic) output voltage (Vo) zero current offset voltage (Vr) output voltage linearity (Ko) 0.5 4 response (tr) at di/dt = If/s 7 % s output voltage temperature characteristics 0.1 %/C zero current offset voltage characteristics 1.5 mV/C 8 mV 10*If A hysteresis (Vh) at +If to zero current primary over current for maximum 50 ms, no damage withstand voltage between coil and each terminal for 1 minute insulation resistance between coil and each terminal at 500 Vdc 2,000 Vac 500 M operating temperature -10 75 C storage temperature -30 90 C safety approvals UL 508 flammability rating UL94V-0 RoHS yes Notes: 4. Deducting the value of hysteresis and offset voltage, calculated by (V/Vo)/(IfxI-1)x100%. cuidevices.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Devices SERIES: CSXX05B DESCRIPTION: CURRENT SENSOR date 02/19/2020 page 2 of 4 SOLDERABILITY parameter conditions/description hand soldering for maximum 3 seconds min typ max units 280 C MECHANICAL parameter conditions/description min dimensions 15 x 15 x 20 case material PBT terminals phosphor bronze with tin plating typ max units mm weight 8 g MECHANICAL DRAWING units: mm tolerance: 0.5 mm Output (V) 4 0V 5 +Input (A) 6 -Input (A) s 3 s $ 3LQ1R MODEL NO. OA (mm) OB (mm) CS0305B 0.6 1.2 CS0505B 0.9 1.5 CS1005B 1.1 1.7 CS1505B 1.4 2.0 CS2005B 1.7 2.3 s NC 3 s 2 s +5 V s FUNCTION 1 PIN PIN CONNECTIONS s % Recommended PCB Layout Top View cuidevices.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Devices SERIES: CSXX05B DESCRIPTION: CURRENT SENSOR date 02/19/2020 page 3 of 4 DERATING CURVE Rated Current (%) Temperature Derating Curve (Natural Convection) 100 80 60 40 20 0 -10 0 20 30 40 45 50 60 70 75 80 Ambient Temperature (C) PERFORMANCE CURVES Output Voltage vs. Input Current Input Current Frequency vs. Output Attenuation N Frequency Input Current (Hz) Input Current (A) Output Voltage vs. Ambient Temperature (at +If) Offset r Offset Voltage vs. Ambient Temperature (at Zero Current) Ambient Temperature (C) Ambient Temperature (C) cuidevices.com N Additional Resources: Product Page | 3D Model CUI Devices SERIES: CSXX05B DESCRIPTION: CURRENT SENSOR | PCB Footprint date 02/19/2020 page 4 of 4 REVISION HISTORY rev. description date 1.0 initial release 09/03/2019 1.01 brand update 02/19/2020 The revision history provided is for informational purposes only and is believed to be accurate. CUI Devices offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI Devices reserves the right to make changes to the product at any time without notice. Information provided by CUI Devices is believed to be accurate and reliable. However, no responsibility is assumed by CUI Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI Devices products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. cuidevices.com