INFRA-RED EMITTING DIODES AP3216F3C AP3216SF4C Features ! WATER Description CLEAR LENS AVAILABLE. ! 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. F3 Made with Gallium Arsenide Infrared Emitting diodes. SF4 Made with Gallium Aluminum Arsenide Infrared ! HIGH POWER OUTPUT. Emitting diodes. ! PACKAGE: 2000PCS/REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. D i g i t a l l y s i g n e d b y Y A N G S H O U F E N c n = Y A N G S H O U F E N , o u = K I N G B R I H G T , o = 4 2 , c = U S D a t e : 2 0 0 1 . 1 1 . 1 2 1 3 : 5 7 : 5 4 + 0 8 '0 0 'R e a s o n : D o c u m e n t i s c e r t i f i e d SPEC NO: CDA0510 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: NOV/12/2001 DRAWN: M.F.CAI PAGE: 1 OF 5 Selection Guide Par t No . Dic e Po = (mW/s r ) @20mA L en s Ty p e Viewin g An g le Mi n . Ty p . 21/2 AP3216F3C GaAs WATER CLEAR 0.5 1.2 120 AP3216SF4C GaAlAs WATER CLEAR 0.5 1 120 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25C It em P/N Sy m b o l Ty p . Max . Un it Co n d it io n Forward Voltage F3 S F4 VF 1.2 1.3 1.5 1.7 V IF=20mA Reverse Current F3 S F4 IR - 10 10 uA VR=5V Junction Capacitance F3 S F4 C 90 90 - pF V=0 f=1MHz Peak Spectral Wavelength F3 S F4 P 940 880 - nm IF=20mA Spectral Bandwidth F3 S F4 50 50 - nm IF=20mA Absolute Maximum Ratings at T)=25C It em Sy m b o l Max im u m Rat in g Un it s Power Dissipation PT 100 mW Forward Current IF 50 mA 1.2 A Peak Forward Current i Reverse Voltage VR 5 V Operating Temperature TA -40~ +85 C TSTG -40~ +85 C Storage Temperature FS Note: 1.1/100 Duty Cycle, 10us Pluse Width. SPEC NO: CDA0510 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: NOV/12/2001 DRAWN: M.F.CAI PAGE: 2 OF 5 AP3216F3C SPEC NO: CDA0510 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: NOV/12/2001 DRAWN: M.F.CAI PAGE: 3 OF 5 AP3216SF4C AP3216F3C,AP3216SF4C SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. SPEC NO: CDA0510 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: NOV/12/2001 DRAWN: M.F.CAI PAGE: 4 OF 5 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) .! 5." SPEC NO: CDA0510 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: NOV/12/2001 DRAWN: M.F.CAI PAGE: 5 OF 5