19-4729; Rev 5; 8/04 Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers ____________________________Features Maxim's redesigned DG406 and DG407 CMOS analog multiplexers now feature guaranteed matching between channels (8, max) and flatness over the specified signal range (9, max). These low on-resistance muxes (100, max) conduct equally well in either direction and feature guaranteed low charge injection (15pC, max). In addition, these new muxes offer low input off-leakage current over temperature--less than 5nA at +85C. The DG406 is a 1 of 16 multiplexer/demultiplexer and the DG407 is a dual 8-channel multiplexer/demultiplexer. Both muxes operate with a +4.5V to +30V single supply and with 4.5V to 20V dual supplies. ESD protection is guaranteed to be greater than 2000V per Method 3015.7 of MIL-STD 883. These improved muxes are pin-compatible plug-in upgrades for the industry standard DG406 and DG407. Pin-Compatible Plug-In Upgrade for Industry Standard DG406/DG407 Guaranteed Matching Between Channels, 8 (max) Guaranteed On-Resistance Flatness, 9 (max) Guaranteed Low Charge Injection, 15pC (max) Low On-Resistance 100 (max) Input Leakage, 5nA (max) at +85C Low Power Consumption, 1.25mW (max) Rail-to-Rail Signal Handling Digital Input Controls TTL/CMOS Compatible ESD Protection >2000V per Method 3015.7 ________________________Applications Sample-and-Hold Circuits Test Equipment Guidance and Control Systems Communications Systems Data-Acquisition Systems Ordering Information PART DG406CJ DG406CWI DG406C/D DG406DJ DG406EWI DG406DN DG406AK DG406EUI _________________Pin Configurations V+ 1 28 D N.C. 2 27 V- N.C. 3 26 S8 S16 4 25 S7 24 S6 DG406 28 Plastic DIP 28 Wide SO Dice* 28 Plastic DIP 28 Wide SO 28 PLCC 28 CERDIP 28 TSSOP _______________Functional Diagrams TOP VIEW S14 6 PIN-PACKAGE 0C to +70C 0C to +70C 0C to +70C -40C to +85C -40C to +85C -40C to +85C -55C to +125C -40C to +85C Ordering Information continued at end of data sheet. * Contact factory for dice specifications. Audio Signal Routing S15 5 TEMP RANGE 23 S5 S13 7 22 S4 S12 8 21 S3 S11 9 20 S2 S10 10 19 S1 S9 11 18 EN GND 12 17 A0 N.C. 13 16 A1 A3 14 15 A2 DIP/SO/TSSOP Pin Configurations continued at end of data sheet. V+ V- GND S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 S13 S14 S15 S16 D CMOS DECODERS/DRIVERS A0 A1 A2 A3 EN DG406 16-CHANNEL SINGLE-ENDED MULTIPLEXER Functional Diagrams continued at end of data sheet. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 DG406/DG407 General Description DG406/DG407 Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers ABSOLUTE MAXIMUM RATINGS (Voltage Referenced to V-) V+ ............................................................................-0.3V, 44V GND .........................................................................-0.3V, 25V Digital Inputs, S, D (Note 1)....................(V- - 2V) to (V+ + 2V) or 30mA (whichever occurs first) Continuous Current (any terminal) ......................................30mA Peak Current, S or D (pulsed at 1ms, 10% duty cycle max) ..........................100mA Continuous Power Dissipation (TA = +70C) 28-Pin Plastic DIP (derate 9.09mW/C above +70C) ..727mW 28-Pin Wide SO (derate 12.50mW/C above +70C) ...1000mW 28-Pin PLCC (derate 10.53mW/C above +70C) ........842mW 28-Pin CERDIP (derate 16.67mW/C above +70C)...1333mW 28-Pin TSSOP (derate 12.8mW/C above +70C) ......1025mW Operating Temperature Ranges DG406/DG407C_ ...............................................0C to +70C DG406/DG407D_ ............................................-40C to +85C DG406/DG407AK ..........................................-55C to +125C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) .................................+300C Signals on S_, D_, A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings. Note 1: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS--Dual Supplies (V+ = 15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX (Note 2) -15 +15 UNITS SWITCH Analog Signal Range VANALOG (Note 3) Drain-Source On-Resistance RDS(ON) IS = -1.0mA, VD = 10V TA = +25C IS = -1.0mA, VD = 10V (Note 4) TA = +25C On-Resistance Matching Between Channels RDS(ON) On-Resistance Flatness RFLAT IS = -1.0mA, VD = 5V or 0V TA = +25C Source-Off Leakage Current (Note 5) VD = +10V, VS = 10V, VEN = 0V TA = +25C IS(OFF) Drain-Off Leakage Current (Note 5) VD = 10V, VS = +10V, VEN = 0V 1.5 TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX -0.5 Drain-On Leakage Current (Note 5) 2 ID(ON) + IS(ON) DG406 TA = TMIN to TMAX +5 -50 +50 C, D -40 +40 A -200 +200 -1 -1 TA = TMIN to TMAX +0.02 +0.02 +1 -20 +20 A -100 +100 C, D -40 +40 A -200 +200 -1 +0.02 +0.02 nA nA +1 +1 C, D -20 +20 A -100 +100 _______________________________________________________________________________________ +1 C, D -1 +0.5 A TA = +25C DG407 +0.01 -5 TA = +25C VD = 10V, VS = 10V, sequence each switch on 9 12 C, D TA = +25C DG407 8 10 1.8 TA = +25C DG406 100 125 TA = TMIN to TMAX ID(OFF) VD = +10V, VS = 10V, VEN = 0V 60 TA = TMIN to TMAX V nA Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers (V+ = 15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX (Note 2) UNITS INPUT Input Current with Input Voltage High IAH VA = 2.4V or 15V -1.0 +1.0 A Input Current with Input Voltage Low IAL VEN = 0V or 2.4V, VA = 0V -1.0 +1.0 A 20 30 75 0.5 1 +1 +10 V SUPPLY Power-Supply Range 4.5 VEN = VA = 0V or 5.0V Positive Supply Current Negative Supply Current I+ I- VEN = 2.4V, VA(ALL) = 0V VEN = 2.4V, VA(ALL) = 0V TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX 16 0.075 -1 -10 A mA A DYNAMIC Transition Time tTRANS Figure 2 Break-Before-Make Interval tOPEN Figure 4 Enable Turn-On Time tON(EN) Figure 3 Enable Turn-Off Time tOFF(EN) Figure 3 TA = +25C TA = TMIN to TMAX TA = +25C TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX 110 10 40 130 55 300 400 ns ns 200 400 150 300 ns ns CL = 1.0nF, VS = 0V, RS = 0, Figure 5 TA = +25C 2 VISO VEN = 0V, RL = 1k, f = 100kHz, Figure 6 TA = +25C -69 dB Crosstalk Between Channels VCT VEN = 2.4V, f = 100kHz, VGEN = 1VP-P, RL = 1k, Figure 7 TA = +25C -92 dB Logic Input Capacitance CIN f = 1MHz TA = +25C 8 pF Source-Off Capacitance CS(OFF) f = 1MHz, VEN = VS = 0V, Figure 8 TA = +25C 8 pF Charge Injection (Note 3) Q Off-Isolation (Note 6) Drain-Off Capacitance Drain-Source On Capacitance CD(OFF) CD(ON) + CS(ON) f = 1MHz, VEN = 0.8V, VD = 0V, Figure 8 f = 1MHz, VEN = 2.4V, VD = 0V, Figure 8 DG406 pC 130 TA = +25C DG407 pF 65 DG406 140 TA = +25C DG407 15 pF 70 _______________________________________________________________________________________ 3 DG406/DG407 ELECTRICAL CHARACTERISTICS--Dual Supplies (continued) DG406/DG407 Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers ELECTRICAL CHARACTERISTICS--Single Supply (V+ = 12V, V- = 0V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX (Note 2) UNITS SWITCH Analog Signal Range Drain-Source On-Resistance VANALOG (Note 3) RDS(ON) IS = -1.0mA VD = 3V or 10V 0 12 V TA = +25C 120 175 TA = +25C 130 450 ns DYNAMIC Transition Time (Note 3) tTRANS VS1 = 8V, VS16 = 0V, VA = 0V, Figure 2 Enable Turn-On Time (Note 3) tON(EN) VAL = 0V, VS1 = 5V, Figure 3 TA = +25C 105 600 ns Enable Turn-Off Time (Note 3) tOFF(EN) VAL = 0V, VS1 = 5V, Figure 3 TA = +25C 80 300 ns CL = 1.0nF, VS1 = 0V, RS = 0 TA = +25C 2 10 pC Charge Injection (Note 3) Q Note 2: The algebraic convention where the most negative value is a minimum and the most positive value a maximum is used in this data sheet. Note 3: Guaranteed by design. Note 4: RON = RON(MAX) - RON(MIN). On-resistance match between channels and flatness are guaranteed only with specified voltages. Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured at the extremes of the specified analog signal range. Note 5: Leakage parameters are 100% tested at the maximum-rated hot temperature and guaranteed by correlation at +25C. Note 6: Off-isolation = 20log VD/VS, where VD = output and VS = input to off switch. 4 _______________________________________________________________________________________ Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers ON-RESISTANCE vs. VD AND TEMPERATURE (DUAL SUPPLIES) 140 5V V+ = 15V V- = -15V 400 100 360 320 80 15V 60 +85C 60 +25C -55C 40 20V 280 rDS (ON) () 10V 100 +125C 80 rDS (ON) () 5V 240 200 160 40 10V 120 20 20 0 -20 0 -15 -10 -5 0 5 10 15 -10 -5 VD (V) 0 5 10 15 0 5 10 VD (V) ON-RESISTANCE vs. VD AND TEMPERATURE (SINGLE SUPPLY) V+ = 15V V- = -15V 100 20 ON LEAKAGE vs. TEMPERATURE OFF LEAKAGE vs. TEMPERATURE 1000 DG406/7 TOC-05 V+ = 15V V- = 0V 15 VD (V) 1000 DG406/7 TOC-04 160 140 20V 40 -15 20 15V 80 DG406/7 TOC-06 rDS (ON) () 120 V+ = 15V V- = -15V 100 +85C 100 +25C 80 -55C 60 10 1 ICOM (ON) 0.1 0 ICOM (ON) 10 15 0.0001 -55 -35 -15 5 25 45 65 CHARGE INJECTION vs. VD 20 I+ 10 I+, I- (A) V+ = 15V V- = -15V 10 0 V+ = 12V V- = 0V -10 65 85 105 125 SUPPLY CURRENT vs. TEMPERATURE 100 DG406/7 TOC-07 30 25 45 5 TEMPERATURE (C) TEMPERATURE (C) VD (V) Qj (pC) -55 -35 -15 85 105 125 DG406/7 TOC-08 5 0.1 0.001 0.0001 0 1 INO (OFF) 0.001 20 10 0.01 0.01 40 ON LEAKAGE (nA) OFF LEAKAGE (nA) +125C 120 rDS (ON) () DG406/7 TOC-03 120 DG406/7 TOC-01 160 ON-RESISTANCE vs. VD (SINGLE SUPPLY) DG406/7 TOC-02 ON-RESISTANCE vs. VD (DUAL SUPPLIES) 1 0.1 I0.01 -20 -30 V+ = +15V V- = -15V VEN = VA = 0V, 4.5V 0.001 -15 -10 -5 0 VD (V) 5 10 15 -55 -35 -15 5 25 45 65 85 105 125 TEMPERATURE (C) _______________________________________________________________________________________ 5 DG406/DG407 __________________________________________Typical Operating Characteristics (TA = +25C, unless otherwise noted.) DG406/DG407 Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers _____________________________________________________________Pin Descriptions DG406 PIN NAME DG407 PIN NAME 1 V+ Positive Supply Voltage Input 1 V+ Positive Supply Voltage Input 2, 3, 13 N.C. No Connection. Not internally connected. 2 DB Bidirectional Output B 4-11 S16-S9 3, 13, 14 N.C. 12 GND 4-11 S8B-S1B 14-17 A3-A0 12 GND 18 EN 15, 16, 17 A2, A1, A0 19-26 S1-S8 18 EN 27 V- Negative Supply Voltage Input 19-26 S1A-S8A 28 D Bidirectional Output 27 V- Negative Supply Voltage Input 28 DA Bidirectional Output A FUNCTION Bidirectional Analog Inputs Ground Address Inputs Enable Inputs Bidirectional Analog Inputs __________Applications Information Operation with Supply Voltages Other than 15V FUNCTION No Connection. Not internally connected. Bidirectional Analog Inputs Ground Address Inputs Enable Input Bidirectional Analog Inputs signal range to 1V above V+ and 1V below V-, but low switch resistance and low leakage characteristics are unaffected. Device operation is unchanged, and the difference between V+ and V- should not exceed +44V. Using supply voltages other than 15V reduces the analog signal range. The DG406/DG407 switches operate with 4.5V to 20V bipolar supplies or with a +4.5V to +30V single supply; connect V- to GND when operating with a single supply. Also, both device types can operate with unbalanced supplies such as +24V and -5V. The Typical Operating Characteristics graphs show typical on-resistance with 20V, 15V, 10V, and 5V supplies. (Switching times increase by a factor of two or more for operation at 5V.) V+ S D Overvoltage Protection Proper power-supply sequencing is recommended for all CMOS devices. Do not exceed the absolute maximum ratings because stresses beyond the listed ratings may cause permanent damage to the devices. Always sequence V+ on first, then V-, followed by the logic inputs and analog signals. If power-supply sequencing is not possible, add two small signal diodes in series with supply pins for overvoltage protection (Figure 1). Adding diodes reduces the analog 6 Vg V- Figure 1. Overvoltage Protection Using External Blocking Diodes _______________________________________________________________________________________ Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers +15V V+ S1 A0 A1 10V S2-S15 A2 DG406 A3 S16 EN +10V D GND VOUT V- LOGIC INPUT 50% 35pF 50 0V 300 +15V -15V VS1 SWITCH OUTPUT VOUT V+ S1B A0 A1 10V +10V tTRANS DB GND tTRANS ON VOUT V- 50 0V VS16 S8B EN 90% 90% DG407 S1A-S8A A2 tR < 20ns tF < 20ns +3V 35pF 300 -15V Figure 2. Transition Time +15V V+ EN S1 A0 -5V S2-S16 A1 DG406 A2 A3 D GND 50 VOUT V- 35pF 1k LOGIC INPUT V+ S1B -5V 90% VOUT DG407 A2 50 10% SWITCH OUTPUT S1A-S16A S2B-S16B, DA A1 tOFF(EN) 0V +15V A0 50% 0V tON(EN) -15V EN tR < 20ns tF < 20ns +3V DB GND VOUT V1k 35pF -15V Figure 3. Enable Switching Time _______________________________________________________________________________________ 7 DG406/DG407 ______________________________________________Test Circuits/Timing Diagrams DG406/DG407 Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers _________________________________Test Circuits/Timing Diagrams (continued) +15V +2.4V V+ EN A0 S1-S16 +5V tR < 20ns tF < 20ns +3V LOGIC INPUT 50% 0V A1 A2 VOUT DG406 80% A3 D GND SWITCH OUTPUT VOUT V- 35pF tOPEN 0V 300 50 -15V Figure 4. Break-Before-Make Interval +15V RS S1-S16 V+ LOGIC INPUT EN VS CHANNEL SELECT +3V OFF ON OFF 0V A0 D A1 VOUT DG406 A2 A3 CL = 1000nF GND V- VOUT VOUT VOUT IS THE MEASURED VOLTAGE DUE TO CHARGE TRANSFER ERROR Q WHEN THE CHANNEL TURNS OFF. -15V Q = CL = VOUT Figure 5. Charge Injection 8 _______________________________________________________________________________________ Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers +15V 10nF +15V VOUT VIN S1 RS = 50 V+ RL = 1k S16 10nF V+ S1 S2 S16 A0 D DG406 A1 VOUT RS = 50 RL = 1k A2 A0 DG406 COM EN V- A1 A2 A3 GND EN A3 GND V- 10nF -15V OFF ISOLATION = 20log 10nF VOUT VIN CROSSTALK = 20log Figure 6. Off-Isolation -15V VOUT VIN Figure 7. Crosstalk +15V V+ A3 CHANNEL SELECT S1 Meter A2 DG406 A1 S16 A0 Impedance Analyzer D GND EN V- f = 1MHz -15V Figure 8. Source/Drain Capacitance _______________________________________________________________________________________ 9 DG406/DG407 _________________________________Test Circuits/Timing Diagrams (continued) ________Pin Configurations/Functional Diagrams/Truth Tables (continued) TOP VIEW V+ 1 28 DA DB 2 27 V- N.C. 3 26 S8A S8B 4 25 S7A S7B 5 24 S6A DG407 S6B 6 23 S5A S5B 7 22 S4A S4B 8 21 S3A S3B 9 20 S2A S2B 10 19 S1A S1B 11 18 EN GND 12 17 A0 N.C. 13 16 A1 N.C. 14 15 A2 A3 A2 A1 A0 EN ON Switch X 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 X 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 X 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 X 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 None 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 DG406 LOGIC "0" VAL 0.8V, LOGIC "1" = VAH 2.4V DB V+ DA 3 2 1 28 27 26 S8A N.C. 4 V- S8B DIP/SO S7B 5 25 S7A S6B 6 24 S6A S5B 7 23 S5A DG407 S4B 8 22 S4A S3B 9 21 S3A S2B 10 20 S2A S1B 11 19 S1A A2 A1 A0 EN ON Switch X 0 0 0 0 1 1 1 1 X 0 0 1 1 0 0 1 1 X 0 1 0 1 0 1 0 1 0 1 1 1 1 1 1 1 1 None 1 2 3 4 5 6 7 8 PLCC A0 18 EN A2 N.C. N.C. 16 17 A1 DG407 12 13 14 15 GND DG406/DG407 Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers LOGIC "0" VAL 0.8V, LOGIC "1" = VAH 2.4V N.C. = NO INTERNAL CONNECTION 10 ______________________________________________________________________________________ Improved, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers V+ V- GND S1A S2A S3A S4A S5A S6A S7A S8A S1B S2B S3B S4B S5B S6B S7B S8B DA _Ordering Information (continued) PART TEMP RANGE DG407CJ 0C to +70C 0C to +70C 0C to +70C -40C to +85C -40C to +85C -40C to +85C -55C to +125C -40C to +85C DG407CWI DG407C/D DG407DJ DG407EWI DG407DN DG407AK DG407EUI PIN-PACKAGE 28 Plastic DIP 28 Wide SO Dice* 28 Plastic DIP 28 Wide SO 28 PLCC 28 CERDIP 28 TSSOP * Contact factory for dice specifications. DB CMOS DECODERS/DRIVERS A0 A1 A2 EN DG407 8-CHANNEL DIFFERENTIAL MULTIPLEXER ______________________________________________________________________________________ 11 DG406/DG407 __Functional Diagrams (continued) DG406/DG407 Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers __________________________________________________________Chip Topographies DG406 EN A0 A1 A2 DG407 A3 N.C. EN A0 A1 A2 N.C. N.C. 0.184" (4.67mm) 0.184" (4.67mm) GND GND S1 S9 S1A S1B S2 S10 S2A S2B S3 S11 S3A S3B S4 S12 S4A S4B S5 S13 S5A S5B S6 S14 S6A S6B S7 S15 S7A S7B S8 S16 S8A S8B N.C. V- D V+ DB V- 0.078" (1.98mm) DA V+ 0.078" (1.98mm) N.C. = NO INTERNAL CONNECTION DG406 TRANSISTOR COUNT: 269 DG407 TRANSISTOR COUNT: 269 SUBSTRATE IS INTERNALLY CONNECTED TO V+ SUBSTRATE IS INTERNALLY CONNECTED TO V+ 12 ______________________________________________________________________________________ Improved, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers TSSOP4.40mm.EPS Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 13 (c) 2004 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products. DG406/DG407 Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.)