Customer Special VJ....W2BC www.vishay.com Vishay Surface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications FEATURES * Dry sheet manufacturing technology * Six standard sizes * * * * High capacitance per unit volume Supplied in tape on reel Ni-barrier with 100 % tin terminations Ni-barrier with epoxy 100 % tin termination for boardflex sensitive applications * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * Consumer electronics * Telecommunications * Data processing ELECTRICAL SPECIFICATIONS Note * Electrical characteristics at +25 C unless otherwise specified Temperature Coefficient of Capacitance (TCC): With zero (0) VDC applied C0G (NP0): 0 30 ppm/C from -55 C to +125 C X5R: 15 % from -55 C to +85 C X7R: 15 % from -55 C to +125 C Operating Temperature: C0G (NP0): -55 C to +125 C X5R: -55 C to +85 C X7R: -55 C to +125 C Capacitance Range: C0G (NP0): 0.5 pF to 33 nF X5R: 100 nF to 100 F X7R: 100 pF to 22 F Dielectric Strength Test: This is the maximum voltage the capacitors are tested for 1 s to 5 s period and the charge / discharge current does not exceed 50 mA C0G (NP0): < 100 VDC: 300 % of rated voltage X5R, X7R: < 100 VDC: 250 % of rated voltage 100 VDC: 200 % of rated voltage Voltage Range: 4 VDC to 100 VDC ORDERING INFORMATION VJ0402 SIZE CODE A DIELECTRIC 101 CAPACITANCE J TOLERANCE X TERMINATION Q VOLTAGE C PACKAGING 0201 0402 0603 0805 1206 1210 A = C0G (NP0) G = X5R Y = X7R Two significant digits followed by the number of zeros: 1R0 = 1 pF 101 = 100 pF 152 = 1500 pF 103 = 10 000 pF C0G (NP0): Cap. < 10 pF C = 0.25 pF Cap. 10 pF F (1) = 1% G (1) = 2 % J=5% X5R: K = 10 % M = 20 % X7R: J (1) = 5 % K = 10 % X = Ni barrier, 100 % tin plate matte finish B = Ni barrier, epoxy, 100 % tin plate, matte finish S=4V Y = 6.3 V Q = 10 V J = 16 V X = 25 V Z = 35 V A = 50 V B = 100 V C, S = 7" reel / paper tape P, Y = 13" reel / paper tape E, X = 7" reel / plastic tape M, L= 13" reel / plastic tape W2BC PROCESS CODE FOR BASIC COMMODITY Note (1) Tight tolerance, please contact our sales office for availability Revision: 07-Jun-16 Document Number: 00306x 1 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay SELECTION CHART DIELECTRIC STYLE VJ0402 VJ0603 SIZE CODE 0402 0603 25 50 100 25 50 VOLTAGE (VDC) VOLTAGE CODE X A B X A CAP. CODE CAP. 0R5 0.5 pF N B 1R0 1.0 pF N B 1R2 1.2 pF N B 1R5 1.5 pF N B 1R8 1.8 pF N B 2R2 2.2 pF N B 2R7 2.7 pF N B 3R3 3.3 pF N B 3R9 3.9 pF N B 4R7 4.7 pF N B 5R6 5.6 pF N B 6R8 6.8 pF N B 8R2 8.2 pF N B 100 10 pF N B 120 12 pF N B 150 15 pF N B 180 18 pF N B 220 22 pF N B 270 27 pF N B 330 33 pF N B 390 39 pF N B 470 47 pF N B 560 56 pF N B 680 68 pF N B 820 82 pF N B 101 100 pF N B 121 120 pF N B 151 150 pF N B 181 180 pF N B 221 220 pF N B 271 270 pF N B 331 330 pF N B 391 390 pF N B 471 470 pF N B 561 560 pF B 681 680 pF B 821 820 pF B 102 1000 pF B 122 1200 pF B 152 1500 pF B 182 1800 pF B 222 2200 pF B 272 2700 pF 332 3300 pF 392 3900 pF 472 4700 pF 562 5600 pF 682 6800 pF 822 8200 pF 103 0.01 F 123 0.012 F 153 0.015 F 183 0.018 F 223 0.022 F 273 0.027 F 333 0.033 F 393 0.039 F 473 0.047 F 563 0.056 F 683 0.068 F 823 0.082 F 104 0.1 F Notes * Letters indicate product thickness, see packaging quantities * Special values, thickness, please contact our sales office for availability Revision: 07-Jun-16 C0G (NP0) 100 B 25 X VJ0805 0805 50 A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A C C C F F F F F F F F F F F F 100 B 25 X VJ1206 1206 50 A 100 B E E E E E F F F F H H H H H H H H H H Document Number: 00306x 2 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay SELECTION CHART DIELECTRIC STYLE SIZE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 473 0.047 F 563 0.056 F 683 0.068 F 823 0.082 F 104 0.1 F 124 0.12 F 154 0.15 F 184 0.18 F 224 0.22 F 274 0.27 F 334 0.33 F 394 0.39 F 474 0.47 F 564 0.56 F 684 0.68 F 824 0.82 F 105 1 F 155 1.5 F 225 2.2 F 335 3.3 F 475 4.7 F 685 6.8 F 106 10 F 156 15 F 226 22 F 336 33 F 476 47 F 686 68 F 107 100 F Note (1) Dimensions tolerance increased X5R VJ0201 0201 4 6.3 S Y 4 S L N L L VJ0402 0402 6.3 10 16 Y Q J N N N N N N N N N N N 25 X 6.3 Y L 25 X 4 S VJ0805 0805 6.3 10 16 Y Q J 25 X F F C/F F F F F F F C/F F F Y N B N B B N L (1) VJ0603 0603 10 16 Q J B B N N N B B N (1) N (1) N B B N (1) N (1) N B B N (1) N B B B B B C (1) C / F B Y C (1) Y SELECTION CHART DIELECTRIC STYLE VJ1206 SIZE CODE 1206 VOLTAGE (VDC) 6.3 10 16 25 VOLTAGE CODE Y Q J X CAP. CODE CAP. 105 1 F 155 1.5 F 225 2.2 F H H 335 3.3 F 475 4.7 F H H E/H 685 6.8 F 106 10 F H H E/H H 156 15 F 226 22 F H H E/H H 336 33 F 476 47 F H 686 68 F 107 100 F H Notes * Letters indicate product thickness, see packaging quantities * Special values, thickness, please contact our sales office for availability Revision: 07-Jun-16 X5R 50 A 6.3 Y 10 Q VJ1210 1210 16 J 25 X 50 A H U J E/J E/J J J J Document Number: 00306x 3 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay SELECTION CHART DIELECTRIC STYLE VJ0402 SIZE CODE 0402 6.3 10 16 25 50 100 VOLTAGE (VDC) VOLTAGE CODE Y Q J X A B CAP. CODE CAP. 101 100 pF N 121 120 pF 151 150 pF N 181 180 pF 221 220 pF N 271 270 pF 331 330 pF N 391 390 pF 471 470 pF N 561 560 pF 681 680 pF N 821 820 pF 102 1000 pF N 122 1200 pF 152 1500 pF N 182 1800 pF 222 2200 pF N 272 2700 pF 332 3300 pF N 392 3900 pF 472 4700 pF N 562 5600 pF 682 6800 pF N 822 8200 pF 103 0.01 F N N 123 0.012 F 153 0.015 F N 183 0.018 F 223 0.022 F N 273 0.027 F 333 0.033 F N N 393 0.039 F 473 0.047 F N N 563 0.056 F 683 0.068 F N N 823 0.082 F 104 0.1 F N N 124 0.12 F 154 0.15 F 184 0.18 F 224 0.22 F N 274 0.27 F 334 0.33 F 394 0.39 F 474 0.47 F 564 0.56 F 684 0.68 F 824 0.82 F 105 1 F 155 1.5 F 225 2.2 F 335 3.3 F 475 4.7 F 685 6.8 F 106 10 F 156 15 F 226 22 F 336 33 F 476 47 F 686 68 F 107 100 F Notes * Letters indicate product thickness, see packaging quantities * Special values, thickness, please contact our sales office for availability (1) Dimensions tolerance increased Revision: 07-Jun-16 6.3 Y X7R VJ0603 0603 10 16 25 Q J X B B 50 A 6.3 Y VJ0805 0805 10 16 25 Q J X B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A C B A C A C C A F F C F F C F F/D F F F F (1) D D F B B B B B B B B B B B B 50 A B B B F F F F F/D F F F Document Number: 00306x 4 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay SELECTION CHART DIELECTRIC STYLE SIZE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 155 225 335 475 685 106 156 226 336 476 686 107 X7R 6.3 Y CAP. 1000 pF 1200 pF 1500 pF 1800 pF 2200 pF 2700 pF 3300 pF 3900 pF 4700 pF 5600 pF 6800 pF 8200 pF 0.01 F 0.012 F 0.015 F 0.018 F 0.022 F 0.027 F 0.033 F 0.039 F 0.047 F 0.056 F 0.068 F 0.082 F 0.1 F 0.12 F 0.15 F 0.18 F 0.22 F 0.27 F 0.33 F 0.39 F 0.47 F 0.56 F 0.68 F 0.82 F 1 F 1.5 F 2.2 F 3.3 F 4.7 F 6.8 F 10 F 15 F 22 F 33 F 47 F 68 F 100 F 10 Q 16 J VJ1206 1206 25 X 35 Z 50 A 100 B 10 Q 16 J VJ1210 1210 25 X 50 A 100 B F F F F F F H F F H F J F J F H J U J U J U J J J J E H F H H F H H F H H H H H H H H H H H H U Notes * Letters indicate product thickness, see packaging quantities * Special values, thickness, please contact our sales office for availability Revision: 07-Jun-16 Document Number: 00306x 5 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay SELECTION CHART EPOXY TERMINATION (CODE "B") DIELECTRIC X7R STYLE VJ0603 VJ0805 SIZE CODE 0603 0805 VOLTAGE (VDC) 16 25 50 100 16 25 50 VOLTAGE CODE J X A B J X A CAP. CODE CAP. 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF B A 561 560 pF 681 680 pF 821 820 pF 102 1000 pF B A 122 1200 pF 152 1500 pF 182 1800 pF 222 2200 pF B A 272 2700 pF 332 3300 pF 392 3900 pF 472 4700 pF B A 562 5600 pF 682 6800 pF 822 8200 pF 103 0.01 F B B A 123 0.012 F 153 0.015 F A 183 0.018 F 223 0.022 F B A 273 0.027 F 333 0.033 F 393 0.039 F 473 0.047 F B C 563 0.056 F 683 0.068 F 823 0.082 F 104 0.1 F B B C 124 0.12 F 154 0.15 F 184 0.18 F 224 0.22 F F F 274 0.27 F 334 0.33 F 394 0.39 F 474 0.47 F F F 564 0.56 F 684 0.68 F 824 0.82 F 105 1 F F F 155 1.5 F 225 2.2 F 335 3.3 F 475 4.7 F 685 6.8 F 106 10 F 156 15 F 226 22 F 336 33 F 476 47 F 686 68 F 107 100 F Notes * Letters indicate product thickness, see packaging quantities * Detail part numbers, special values, thickness, please contact our sales office for availability Revision: 07-Jun-16 100 B 16 J F VJ1206 1206 25 50 X A 100 B E F F H Document Number: 00306x 6 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay DIMENSIONS in inches (millimeters) L W T MAX. MB 0201 (0603) 0.024 0.0012 (0.60 0.03) 0.012 0.0012 (0.30 0.05) 0.013 (0.33) 0.006 0.002 (0.15 0.05) 0402 (1005) 0.040 0.002 (1.00 0.05) 0.020 0.002 (0.50 0.05) 0.022 (0.55) 0.010 0.004 (0.25 0.10) 0603 0.063 + 0.006 / - 0.004 0.030 + 0.006 / - 0.004 0.038 0.012 - 0.008 / + 0.010 (1608) (1.60 + 0.15 / - 0.10) (0.80 + 0.15 / - 0.10) (0.95) (0.30 - 0.20 / + 0.25) W T SIZE CODE 0805 (2012) MB MB L 0.080 0.008 (2.00 0.20) 0.050 0.008 (1.25 0.20) 0.057 0.020 - 0.012 / + 0.008 (1.45) (0.50 - 0.30 / + 0.20) 1206 0.126 + 0.012 / - 0.008 0.063 + 0.012 / - 0.008 0.075 (3216) (3.20 + 0.30 / - 0.20) (1.60 + 0.30 / - 0.20) (1.90) 0.020 0.012 (0.50 0.30) 1210 (3225) 0.026 0.014 (0.65 0.35) 0.126 0.016 (3.20 0.40) 0.098 0.012 (2.50 0.30) 0.11 (2.80) PACKAGING QUANTITIES SIZE CODE (inch/mm) MAX. THICKNESS THICKNESS SYMBOL (mm) PAPER TAPE 7" REEL (C) 0201 (0603) 0.33 L 0402 (1005) 0.55 N 10K 0603 (1608) 0.95 B 4K 0805 (2012) 1206 (3216) 1210 (3225) 7" REEL (S) PLASTIC TAPE 13" REEL 13" REEL (P) (Y) 10K 7" REEL (E) 7" REEL (X) 13" REEL 13" REEL (M) (L) 50K 50K 10K 0.75 A 4K 10K 0.95 C 4K 10K 1.40 D 1.40 F 2K 10K 1.45 Y 2K 10K 1.00 E 3K 4K 10K 1.45 F 2K 10K 1.80 H 2K 8K 1.00 E 1.45 F 2K 10K 1.80 H 2K 8K 2.20 U 2K 4K 2.70 J 1K 4K 2.80 V 1K 4K 2K 10K STORAGE OF PRODUCTS Storage Environment Tape packing materials are designed to withstand long-term storage, but they will degrade more rapidly in the presence of high temperature or high humidity. Therefore, the products must be stored in an ambient 5 C to 40 C with a relative humidity of 20 % to 70 %. Allowable storage period is within 6 months from the outgoing date of delivery. Corrosive Gases Since sulfure and chlorine may degrade the solderability of the end termination, it is important to store the capacitors in an environment free of these gases. Temperature Fluctuations Since dew condensation may occur by the differences of temperature when the products are taken out of storage, it is important to maintain a temperature-controlled environment. Revision: 07-Jun-16 Document Number: 00306x 7 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay PAPER TAPE SPECIFICATIONS P2 D0 DIMENSIONS OF PAPER TAPE in millimeters P0 SYM. E F W B0 A0 P1 BLISTER TAPE SPECIFICATIONS D0 P2 SIZE CODE 0201 0402 0.68 0.03 1.12 0.04 1.82 0.05 2.30 0.10 3.50 0.10 W 8.00 0.3 8.00 0.30 8.00 0.30 8.00 0.30 8.00 0.30 E 1.75 0.10 1.75 0.10 1.75 0.10 1.75 0.10 1.75 0.10 F 3.5 0.05 3.50 0.05 3.50 0.05 3.50 0.05 3.50 0.05 D0 1.55 0.05 1.55 0.05 1.55 0.05 1.55 0.05 1.55 0.05 P0 4.00 0.10 4.00 0.10 4.00 0.10 4.00 0.10 4.00 0.10 P1 2.00 0.05 2.00 0.05 4.00 0.10 4.00 0.10 4.00 0.10 P2 2.00 0.05 2.00 0.05 2.00 0.05 2.00 0.05 2.00 0.05 DIMENSIONS OF BLISTER TAPE in millimeters F B0 direction of unreeling REEL SPECIFICATIONS W SIZE CODE 0805 1206 1210 A0 1.45 0.15 1.90 0.20 2.80 0.20 B0 2.30 0.20 3.50 0.20 3.60 0.20 W 8.00 0.30 8.00 0.30 8.00 0.30 E 1.75 0.10 1.75 0.10 1.75 0.10 F 3.50 0.05 3.50 0.05 3.50 0.05 D0 1.35 0.05 1.55 0.05 1.55 0.05 P0 1.00 0.10 1.00 0.10 1.00 0.10 P1 4.00 0.10 4.00 0.10 4.00 0.10 P2 4.00 0.10 4.00 0.10 4.00 0.10 E P1 1206 B0 SYM. D1 0805 0.38 0.03 0.62 0.04 1.01 0.03 1.60 0.20 2.00 0.20 P0 A0 0603 A0 REEL DIMENSIONS AND TAPE WIDTH in millimeters SYM. D C A O 180 mm; 7" O 330 mm; 13" A 13.0 0.5 13.0 0.5 B 9.0 1.0 9.0 1.0 C 180.0 + 0/- 3.0 330.0 2.0 D 60.0 1.0 80.0 1.0 B Revision: 07-Jun-16 Document Number: 00306x 8 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay VJ....W2BC TEST PROCEDURES AND REQUIREMENTS NO. 1 2 3 4 ITEM PERFORMANCE No abnormal exterior appearance Visual inspection through microscope (x 10) Insulation Resistance 10 000 M min. or 500 M x F min. or whichever is smaller 100 M x F min. (3) product whichever is smaller Rated voltage 16 V: 10 000 M min. or 100 M x F min. product whichever is smaller Apply the rated voltage for 60 s to 120 s No dielectric breakdown or mechanical breakdown Apply the specified voltage (3) for 1 s to 5 s Charge / discharge current limit: 50 mA max. Class I - "A" COG (NP0) (rated voltage < 100 V): 300 % of rated voltage Class II - "G" X5R, "Y" X7R (rated voltage < 100 V): 250 % of rated voltage In the case of rated voltage 100 V: 200 % of the rated voltage Class I - "A" C0G (NP0) Within the specified tolerance 1000 pF; 1 MHz 10 %; 0.5 VRMS to 5 VRMS > 1000 pF; 1 kHz 10 %; 0.5 VRMS to 5 VRMS Class II - "G" X5R, "Y" X7R Within the specified tolerance 10 F; 1 kHz 10 %; 1.0 VRMS 0.2 VRMS >10 F; 120 Hz 20 %; 0.5 VRMS 0.1 VRMS; 1 kHz 10 %; 0.5 VRMS 0.1 VRMS (3) Class I - "A" C0G (NP0) Capacitance 30 pF: Q 1000 Capacitance < 30 pF: Q 400 + 20 x C (C: Capacitance) 1000 pF; 1 MHz 10 %; 0.5 VRMS to 5 VRMS >1000 pF; 1 kHz 10 %; 0.5 VRMS to 5 VRMS Withstanding Voltage Capacitance Q "G" X5R 5 tan 6 7 8 TEST CONDITIONS Appearance Temperature Characteristics of Capacitance (TCC) Class II - "G" X5R; "Y" X7R "Y" X7R 50 V / 35 V / 25 V: 0.025 max. / 0.05 max. / 0.10 max. (3) 16 V: 0.035 max. / 0.10 max. (3) 10 V: 0.05 max. / 0.10 max. (3) Class I - "A" COG (NP0) 0 ppm/C 30 ppm/C Class II - "G" X5R, "Y" X7R 15 % (with no bias) Adhesive strength of termination Bending strength 50 V / 35 V: 0.025 max. / 0.05 max. (3) 25 V: 0.025 max. / 0.05 max. / 0.10 max. (3) 16 V: 0.035 max. / 0.05 max. / 0.10 max. (3) 10 V: 0.05 max. / 0.10 max. (3) No indication of peeling shall occur on the terminal electrode Appearance No indication of peeling shall occur Capacitance Class I - "A" C0G (NP0): Capacitance change: 5 % or 0.5 pF whichever is larger Class II - "G" X5R, "Y" X7R: Capacitance change: 12.5 % 10 F; 1 kHz 10 %; 1.0 VRMS 0.2 VRMS > 10 F; 120 Hz 20 %; 0.5 VRMS 0.1 VRMS 1 kHz 10 %; 0.5 VRMS 0.1 VRMS (3) Capacitance shall be measured by the steps shown in the following table Step 1: 25 C 2 C Step 2: min. operating temperature 2 C Step 3: 25 C 2 C Step 4: max. operating temperature 2 C Step 5: 25 C 2 C Apply (3) 200 g.f for 0201 all other 500 g.f (3) pressure for 10 s 1 s - Bending limit: 1.0 mm - Test speed: 1.0 mm/s - Keep the testboard at the limit point in 5 s - Then measure capacitance Notes Detail specification can be checked with our sales people (4) 150 % or 100 % of rated voltage, please contact sales office for rating (3) Revision: 07-Jun-16 Document Number: 00306x 9 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay VJ....W2BC TEST PROCEDURES AND REQUIREMENTS NO. 9 ITEM PERFORMANCE More than 75 % of the terminal surface is to be soldered newly, so metal part does not come out or dissolve Solderability Appearance No mechanical damage shall occur Capacitance Class I - "A" C0G (NP0) Capacitance change: 2.5 % or 0.25 pF whichever is larger Class II - "G" X5R, "Y" X7R Capacitance change: 7.5 % 10 Resistance to Soldering Heat Q - Class I - "A" C0G (NP0) Within the specified initial values tan - Class II - "G" X5R, "Y" X7R Within the specified initial values Insulation resistance Within the specified initial values Withstanding voltage Within the specified initial values Appearance No mechanical damage shall occur Capacitance Class I - "A" COG (NP0) Capacitance change : 2.5 % or 0.25 pF whichever is larger Class II - "G" X5R, "Y" X7R : Capacitance change: 5 % 11 Vibration Test Q - Class I - "A" C0G (NP0) Within the specified initial values tan - Class II - "G" X5R, "Y" X7R Within the specified initial values Insulation resistance Within the specified initial values Withstanding voltage Within the specified initial values TEST CONDITIONS - Solder: Sn-3Ag-0.5Cu Solder temp.: 245 C 5 C Flux: RMA type Dip time: 3 s 0.3 s Pre-heating: at 80 C to 120 C for 10 s to 30 s - Solder: 63Sn-37 Pb Solder temp.: 235 C 5 C Flux: RMA type Dip time: 5 s 0.5 s Pre-heating: at 80 C to 120 C for 10 s to 30 s Solder temperature: 270 C 5 C Dip time: 10 s 1 s Each termination shall be fully immersed and preheated as below: Step 1: 80 C to 100 C for 60 s Step 2: 150 C to 180 C for 60 s Leave the capacitor in ambient condition for specified time (24 h 2 h) (3) before measurement. The capacitor shall be subjected to a harmonic motion having a total amplitude of 1.5 mm changing frequency from 10 Hz to 55 Hz and back to 10 Hz in about 1 min. Repeat this for 2 h each in 3 mutually perpendicular directions. Notes (3) Detail specification can be checked with our sales people (4) 150 % or 100 % of rated voltage, please contact sales office for rating Revision: 07-Jun-16 Document Number: 00306x 10 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay VJ....W2BC TEST PROCEDURES AND REQUIREMENTS NO. ITEM PERFORMANCE Appearance No mechanical damage shall occur Capacitance Class I - "A" C0G(NP0): Capacitance change: 7.5 % or 0.75 pF whichever is larger Class II - "G" X5R, "Y" X7R: Capacitance change: 12.5% Q - Class I - "A" COG (NP0) 12 Capacitance 30 pF: Q 200 Capacitance < 30 pF: Q 100 + 10/3 x C (C: Capacitance) Moisture Resistance tan - Class II "G" X5R, "Y" X7R Insulation resistance "G" X5R 50 V / 35 V: 0.05 max. / 0.075 max. (3) 25 V / 16 V: 0.05 max. / 0.075 max. / 0.125 max. (3) 10 V: 0.075 max. / 0.125 max. (3) "Y" X7R 50 V / 35 V / 25 V / 16 V: 0.05 max. / 0.125 max. (3) 10 V: 0.075 max. / 0.125 max. (3) 500 M min. or 25 M x F min. product whichever is smaller / 12.5 M x F or over (3) Appearance No mechanical damage shall occur Capacitance Class I - "A" C0G(NP0): Capacitance change: 3 % or 0.3 pF whichever is larger Class II - "G" X5R, "Y" X7R: Capacitance change: 12.5 % Q - Class I - "A" COG (NP0) 13 High Temperature Resistance tan - Class II "G" X5R, "Y" X7R Insulation resistance Capacitance 30 pF: Q 350 10 Capacitance < 30 pF: Q 275 + 2.5 x C (C: Capacitance) Capacitance < 10 pF: Q 200 + 10 x C (C: Capacitance) "G" X5R 50 V / 35 V: 0.05 max. / 0.075 max. (3) 25 V / 16 V: 0.05 max. / 0.075 max. / 0.125 max. (3) 10 V: 0.075 max. / 0.125 max. (3) "Y" X7R 50 V / 35 V / 25 V / 16 V: 0.05 max. / 0.125 max. (3) 10 V: 0.075 max. / 0.125 max. (3) TEST CONDITIONS Applied voltage: rated voltage Temperature: 40 C 2 C Humidity: 90 % to 95 % RH Duration time: 500 h + 12 h / - 0 h Charge / discharge current : 50 mA max. Initial measurement: For Class II - "G" X5R, "Y" X7R Perform the heat treatment 150 C + 0 C / - 10 C for 1 h Then leave the capacitor in ambient condition for 24 h 2 h before measurement. Final measurement: Class I - "A" COG (NP0): Leave the capacitor in ambient condition for 24 h 2 h before measurement. Class II - "G" X5R, "Y" X7R: Perform the heat treatment 150 C + 0 C / - 10 C for 1 h. Then leave the capacitor in ambient condition for 24 h 2 h before measurement. Applied voltage: 200 % of rated voltage (4) Temperature: max. operating temperature Duration time: 1000 h + 48 h / - 0 h Charge / discharge current: 50 mA max. Initial measurement: For Class II - "G" X5R, "Y" X7R Perform the heat treatment 150 C + 0 C / - 10 C for 1 h Then leave the capacitor in ambient condition for 24 h 2 h before measurement. Final measurement: Class I - "A" COG(NP0): Leave the capacitor in ambient condition for 24 h 2 h before measurement. Class II - "G" X5R, "Y" X7R : Perform the heat treatment 150 C + 0 C / - 10 C for 1 h. Then leave the capacitor in ambient condition for 24 h 2 h before measurement. 1000 M min. or 50 M x F min. product whichever is smaller / 25 M x F or over (3) Notes (3) Detail specification can be checked with our sales people (4) 150 % or 100 % of rated voltage, please contact sales office for rating Revision: 07-Jun-16 Document Number: 00306x 11 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay VJ....W2BC TEST PROCEDURES AND REQUIREMENTS NO. ITEM PERFORMANCE Appearance No mechanical damage shall occur Capacitance Class I - "A" C0G (NP0): Capacitance change: 2.5 % or 0.25 pF whichever is larger Class II - "G" X5R, "Y" X7R: Capacitance change: 7.5 % 14 Temperature Cycle 15 Capacitance shall be subjected to 5 cycles. Condition for one cycle: Step 1: min. operating temperature +0 C / -3 C for 30 min. Step 2: 25 C for 2 min to 3 min Step 3: max. operating temperature +0 C / -3 C for 30 min. Step 4: 25 C for 2 min to 3 min Q - Class I - "A" C0G (NP0) Within the specified initial values tan - Class II "G" X5R, "Y" X7R Within the specified initial values Insulation resistance Within the specified initial values Size in inch (mm) Temperature Characteristic Capacitance and condition 0201 (0603) All All capacitance values: reflow 0402 (1005) All All capacitance values: reflow Class I "A" C0G (NP0) All capacitance values: flow and reflow Class II "G" X5R, "Y" X7R Capacitance values < 1 F: flow and reflow Class II "G" X5R, "Y" X7R Capacitance values 1 F: reflow Class I "A" C0G (NP0) All capacitance values: flow and reflow Class II "G" X5R, "Y" X7R Capacitance values < 4.7 F: flow and reflow Class II "G" X5R, "Y" X7R Capacitance values 4.7 F: reflow Class I "A" C0G (NP0) All capacitance values: flow and reflow Class II "G" X5R, "Y" X7R Capacitance values < 10 F: flow and reflow Class II "G" X5R, "Y" X7R Capacitance values 10 F: reflow All All capacitance values: reflow 0603 (1608) Recommended Soldering Method by Size and Capacitance TEST CONDITIONS 0805 (2012) 1206 (3216) 1210 (3225) Leave the capacitor in ambient condition for specified time (24 h 2 h) (3) before measurement. Notes (3) Detail specification can be checked with our sales people (4) 150 % or 100 % of rated voltage, please contact sales office for rating SOLDERING Since a multilayer ceramic chip capacitor comes into direct contact with melted solder during soldering, it is exposed to potentially mechanical stress caused by the sudden temperature change. The capacitor may also be subjected to silver migration, and contamination by the flux. Because of these factors, soldering technique is critical. Revision: 07-Jun-16 Document Number: 00306x 12 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay REFLOW SOLDERING Lead (Pb)-free (Sn 100 %) Plating Soldering Temp. (C) 260 C + 0 C/- 5 C 10 s max. Pre-heating Gradual Cooling in the air 217 C 200 C Time (s) 150 C (1) (2) SOLDERING TEMPERATURE (C) PRE-HEATING TIME (1) (s) SOLDERING TIME (2) (s) 260 + 0 / - 5 60 to 120 60 to 150 FLOW SOLDERING Soldering Temp. (C) 260 C 3 C 5 s max. Gradual Cooling in the air Pre-heating T Time (s) Pre-heating Temp. (C) (1) (2) (3) T (C) SOLDERING TEMPERATURE (C) PRE-HEATING TIME (1)(2) (s) SOLDERING TIME (3) (s) 150 (1206 and below size) 260 3 120 5 SOLDERING IRON (hand soldering) VARIATION OF TEMP. (C) SOLDERING TEMP. (C) PRE-HEATING TIME (s) SOLDERING TIME (s) COOLING TIME (s) T 130 300 10 max. 60 4 - CONDITION OF IRON FACILITIES WATTAGE (W) TIP DIAMETER (mm) SOLDERING TIME (s) 20 max. 3 max. 4 max. Note * Caution - Iron tip should not contact with ceramic body directly. Manual soldering can pose a great risk of creating thermal cracks in chip capacitors. The hot soldering iron tip comes into direct contact with the end terminations, and operator's carelessness may cause the tip of the soldering iron to come into direct contact with the ceramic body of the capacitor. Therefore the soldering iron must be handled carefully, and close attention must be paid to the selection of the soldering iron tip and to temperature control of the tip. Revision: 07-Jun-16 Document Number: 00306x 13 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Customer Special VJ....W2BC www.vishay.com Vishay RECOMMENDED LAND PATTERN DESIGN b a c REFLOW SOLDERING SIZE CODE inch (mm) a mm b mm c mm 0201 (0603) 0.20 to 0.30 0.20 to 0.30 0.20 to 0.40 0402 (1005) 0.45 to 0.55 0.40 to 0.50 0.40 to 0.60 0603 (1608) 0.60 to 0.80 0.60 to 0.80 0.60 to 0.80 0805 (2012) 1.00 to 1.20 0.80 to 1.20 0.80 to 1.10 1206 (3216) 2.10 to 2.50 1.00 to 1.40 1.00 to 1.40 1210 (3225) 2.00 to 2.40 1.00 to 1.40 1.80 to 2.20 a mm b mm c mm 0603 (1608) 0.60 to 1.00 0.60 to 0.80 0.60 to 0.80 0805 (2012) 1.00 to 1.20 0.80 to 1.20 0.80 to 1.20 1206 (3216) 2.00 to 2.40 1.00 to 1.20 1.00 to 1.40 1210 (3225) 2.00 to 2.40 1.00 to 1.20 2.00 to 2.40 FLOW SOLDERING SIZE CODE inch (mm) Revision: 07-Jun-16 Document Number: 00306x 14 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000