DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series 0.1%, 0.5%, 1%, 5% Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512 Product specification - May 15, 2020 V.11 RoHS compliant & Halogen free Product specification Chip Resistor Surface Mount SCOPE This specification describes RC series chip resistors with lead free terminations made by thick film process. RC_L SERIES 2 10 0075 to 2512 ORDERING INFORMATION - GLOBAL PART NUMBER Global part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. GLOBAL PART NUMBER RC XXXX X X X XX XXXX L APPLICATIONS All general purpose application (1) (2) (3) (4) (5) (6) (7) (1) SIZE 0075/0100/0201/0402/0603/0805/1206/1210/1218/2010/2512 FEATURES Halogen Free Epoxy RoHS compliant Products with lead free terminations meet RoHS requirements Pb-glass contained in electrodes, resistors element and glass are exempted by RoHS Reducing environmentally hazardous wastes High component and equipment reliability Saving of PCB space None forbidden-materials used in products/production (2) TOLERANCE B = 0.1% D = 0.5% F = 1.0% J = 5.0% (for jumper ordering, use code of J) (3) PACKAGING TYPE R = Paper taping reel K = Embossed taping reel S = ESD safe reel (0075/0100 only) (4) TEMPERATURE COEFFICIENT OF RESISTANCE = Based on spec. (5) TAPING REEL & POWER 07 = 7 inch dia. Reel 10=10 inch dia. Reel 13 =13 inch dia. Reel 7W = 7 inch dia. Reel & 2 x standard power 7N = 7 inch dia. Reel, ESD safe reel (0075/0100 only) 3W = 13 inch dia. Reel & 2 x standard power (6) RESISTANCE VALUE There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point Example: 97R6 = 97.6 9K76 = 9760 1M = 1,000,000 (7) DEFAULT CODE Letter L is the system default code for ordering only.(Note) ORDERING EXAMPLE The ordering code for a RC0402 0.0625W chip resistor value 100Kwith 5% tolerance, supplied in 7-inch tape reel of 10,000 units per reel is: RC0402JR-07100KL. NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process". 2. On customized label, "LFP" or specific symbol can be printed. www.yageo.com May. 15, 2020 V.11 Product specification Chip Resistor Surface Mount RC_L SERIES 3 10 0075 to 2512 MARKING RC0075 / RC0100 / RC0201 / RC0402 No Marking ynsc007 Fig. 1 RC0603 0 1%, 0.5%,E24 exception values 10/11/13/15/20/75 of E24 series YNSC037 Fig. 2 240 = 24 x 100 = 24 88 YNSC038 1%, 0.5%, E96 refer to EIA-96 marking method, including values 10/11/13/15/20/75 of E24 series Fig. 3 88A = 806 x 100 = 806 03 YNSC001 5%, E24 series : 3 digits First two digits for significant figure and 3rd digit for number of zeros Fig. 4 Value = 10 K RC0805 / RC1206 / RC1210 / RC2010 / RC2512 00 YNSC004 1%, 0.5%, E24/E96 series : 4 digits First three digits for significant figure and 4th digit for number of zeros Fig. 5 Value = 10 K 03 YNSC001 5%, E24 series : 3 digits First two digits for significant figure and 3rd digit for number of zeros Fig. 6 Value = 10 K RC1218 E-24 series: 3 digits, 5% First two digits for significant figure and 3rd digit for number of zeros YNSC099 Fig. 7 Value = 10 K 00 Both E-24 and E-96 series: 4 digits, 1% & 0.5% First three digits for significant figure and 4th digit for number of zeros YNSC103 Fig. 8 Value = 10 K For further marking information, please see special data sheet "Chip resistors marking". www.yageo.com May. 15, 2020 V.11 Product specification Chip Resistor Surface Mount SERIES RC_L 4 10 0075 to 2512 Outlines CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environmental influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Ni-barrier) are added, as shown in Fig.9. For dimensions, please refer to Table 1 marking layer overcoat primary glass layer resistive layer (Jumper chip is a conductor) inner electrode termination(Ni/matte tin) inner electrode H ceramic substrate I2 overcoat I1 W YNSC086 L 9 Fig. 9 Chip resistor outlines DIMENSION Table 1 TYPE RC0075 L (mm) W (mm) H (mm) I1 (mm) I2 (mm) 0.300.01 0.150.01 0.130.01 0.080.03 0.080.03 RC0100 0.400.02 0.200.02 0.130.02 0.100.03 0.100.03 RC0201 0.600.03 0.300.03 0.230.03 0.100.05 0.150.05 RC0402 1.000.05 0.500.05 0.350.05 0.200.10 0.250.10 RC0603 1.600.10 0.800.10 0.450.10 0.250.15 0.250.15 RC0805 2.000.10 1.250.10 0.500.10 0.350.20 0.350.20 RC1206 3.100.10 1.600.10 0.550.10 0.450.20 0.400.20 RC1210 3.100.10 2.600.15 0.550.10 0.450.15 0.500.20 RC1218 3.100.10 4.600.10 0.550.10 0.450.20 0.400.20 RC2010 5.000.10 2.500.15 0.550.10 0.450.15 0.500.20 RC2512 6.350.10 3.100.15 0.550.10 0.600.20 0.500.20 ELECTRICAL CHARACTERISTICS Table 2 CHARACTERISTICS POWER OPERATING TEMPERATURE RANGE -55 to 125 RC0075 1/50 outlines W Fig. 4 Chip resistor MAXIMUM WORKING VOLTAGE 10V MAXIMUM DIELECTRIC OVERLOAD WITHSTANDING VOLTAGE VOLTAGE 25V 25V RESISTANCE RANGE TEMPERATURE COEFFICIENT JUMPER CRITERIA 5% (E24) 10R<100 10R1M -200~+600ppm 1% (E24/E96) 100R1M 10R1M 200ppm Jumper<50m Rated Current 0.5A Maximum Current 1.0A 5% (E24) 1R<10 Rated Current 0.5A -200~+600ppm Maximum 10 R < 100: Current 1R10M 300ppm/C 1.0A 0.5% (E24/E96) 100 R 10M: 33R470K 200ppm/C Jumper<50m 10M< R 22M: 250ppm/C 1R22M 1% (E24/E96) RC0100 1/32 W -55 to 125 15V 30V 30V www.yageo.com May. 15, 2020 V.11 Product specification Chip Resistor Surface Mount RC_L SERIES 5 10 0075 to 2512 Table 2 CHARACTERISTICS RC0201 POWER 1/20 W OPERATING TEMPERATURE RANGE -55 to 125 MAXIMUM WORKING VOLTAGE 25V MAXIMUM DIELECTRIC OVERLOAD WITHSTANDING VOLTAGE VOLTAGE 50V 50V RESISTANCE RANGE TEMPERATURE COEFFICIENT JUMPER CRITERIA 5% (E24) 1R10 1R10M -100~+350ppm 1% (E24/E96) 1095% covered) No visible damage No visible damage dry heat 2nd step: leadfree solder bath at 245 3C Dipping time: 3 0.5 seconds -Leaching J-STD-002 test D Leadfree solder ,260C, 30 seconds immersion time No visible damage -Resistance to Soldering Heat MIL-STD-202 Method 210F IEC 60115-1 4.18 Condition B, no pre-heat of samples 0075: (3%+50m) <50m for jumper 01005: (1% +50m) < 50mf or jumper Others: Leadfree solder, 260C 5C, 10 1 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol (0.5% +50m) for B/D/F tol. (1% +50m) for J tol. <50mR for jumper No visible damage www.yageo.com May. 15, 2020 V.11 Product specification Chip Resistor Surface Mount RC_L SERIES 10 10 0075 to 2512 REVISION HISTORY REVISION DATE Version 11 TYPE May 15, 2020 CHANGE NOTIFICATION - POWER TEMPERATURE COEFFICIENT RESISTANCE RANGE TOLERANCE - Extend RC0201, RC0402, RC0603, RC0805, RC1206 DOF tolRESISTANCE resistance 1/10W, 3/10W, 2/5W, 1/2W 0603 Version 10 Dec. 12, 2018 1/5W, 0805 Mar. 06, 2018 1206 Version 9 Version 8 1/2W, 1W July 10, 2017 1/8W, 1/4W, 1/3W, 1/2W 1/4W, 1/2W - The resistors are constructed using outstanding TCR level Version 7 Mar.material, 7, 2017 which makes Yageo PF resistors excellent for current sensing in battery Version 6 Feb.15, 2017 application charger circuit & DC-DC converter. Version 5 Oct. 06, 2016 The composition of the resistive PF 2010 material is adjusted to give the Version 4 Jan. 22, 2016 - required resistance approximate and is covered with a protective coating, which printed with the Version 3 Dec. 24, 2015 resistance value. Finally, the three external Version 2 Jul. 23, 2015 - (Ni / matte Tin) are terminations added, as shown in Fig. 4. Version 1 Jan. 21, 2015 - Version 0 Dec. 15, 2014 - 2512 4527 DESCRIPTION range to 1ohm 5 m R < 100 m - Updated 0075 dimensions 4 m R < 100 m - Add 0.5%/1% marking rule for RC0603 ~ RC2512 based on marking 3 m R < 100 m datasheet - Add "3W" part number coding for 13" Reel & double power - Add 10" packing - Extend RC0805 and RC1206 resistance range to 100Mohm - Description: Update Dimension of I2 of RC2512 (2W) 1% 5 m R < 100 m 2% - Update resistance range 5% 75 ppm/C - Updated test and requirements - Updated test and requirements - ESD Safe Reel update 1W, 2W 1 m R < 100 m - First issue of this specification 3W 1 m R 50 m 2W, 3W, 5W 6 m R < 1 NOTE: 1. PLEASE CONTACT WITH SALES OFFICES, DISTRIBUTORS AND REPRESENTATIVES IN YOUR REGION BEFORE ORDERING " Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN." www.yageo.com May. 15, 2020 V.11