E Series
Sealed Miniature Rocker and Lever Handle Switches
Features/Benefits
•
Sealed against solder and cleaning
process contaminants
•
ESD Resistance—all actuator options
•
Rocker, case & bushing UL 94V-0
•
RoHS compliant
Typical Applications
•
Telecommunications
•
Instrumentation
•
Computers & peripherals
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material (E1XX & E2XX Models): 7.5 AMPS
@125 V AC or 28 V DC; 3 AMPS @ 250 V AC. (E3XX Models):
5 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC.
See page G-37 for additional ratings.
ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break
cycles at full load. E3XX models: 30,000 cycles.
CONTACT RESISTANCE: Below 10 m Ωtyp. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
ELECTROSTATIC DISCHARGE (ESD) OPTION: All actuator
options: 15,000 V DC max. @ sea level, actuator to terminals.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
Materials
CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat
stabilized (UL 94V-0).
ACTUATOR: Nylon, black standard, internal o-ring seal standard
with all actuators.
FRAME: Spring steel, black standard.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
ACTUATOR PIVOT & MOUNTING BRACKET: Nylon.
ACTUATOR PIVOT RETAINER: Stainless steel.
CONTACTS & TERMINALS: B contact material: Copper alloy, with gold
plate over nickel plate. Q contact material: Copper alloy, silver
plated. See page G-37 for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut, Screw & Lockwasher: Stainless steel.
Standoff: Nylon standard, aluminum available, consult Customer
Service Center.
NOTE: Any models supplied with Q, B, G, S, P & R contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages G-27 through G-39. For additional options not shown in catalog, consult Customer Service Center. All
models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
Switch Function
E101 SP On-None-On
E103 SP On-Off-On
E105 SP Mom.-Off-Mom.
E107 SP On-Off-Mom.
E108 SP On-None-Mom.
E201 DP On-None-On
E203 DP On-Off-On
E205 DP Mom.-Off-Mom.
E207 DP On-Off-Mom.
E208 DP On-None-Mom.
E211 DP On-On-On
E213 DP On-On-Mom.
E215 DP Mom.-On-Mom.
E301 3P On-None-On
Actuator
J1 .531 long rocker
J2 Lever
J3 .906" long rocker
J11 Rocker with frame
J21 Lever with frame
J50 .362" long rocker
J60 Lever
J90 Lever
Terminations
ARight angle, PC thru-hole
AV2 Vertical right angle, PC thru-hole
CPC Thru-hole
ZSolder lug
A3 Right angle, snap-in, PC thru-hole
AV3 Vertical right angle, snap-in, PC thru-hole
V3 .460" high, V-bracket
V4 .630" high, V-bracket
V5 Vertical right angle, PC thru-hole
V6 .460" high, V-bracket
V7 .630" high, V-bracket
V8 .953" high, V-bracket
V21 .555" high, V-bracket, snap-in
V31 .460" high, V-bracket, snap-in
Contact Material
BGold
PGold, matte tin
QSilver
SSilver, matte-tin
GGold over silver
RGold over silver, matte-tin
Seal
EEpoxy
Actuator Color
2Black
3Red Frame Color
2Black
NONE No frame color required
Metal Frame Color
(J11, J21 Actuators)
2Black
G–26
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
G
Rocker
DPDT
2-1,5-4
N/A
OPEN
N/A
2-3,5-4
2-3,5-6
ON NONE ON
ON OFF ON
MOM. OFF MOM.
ON OFF MOM.
ON NONE MOM.
ON ON ON
ON ON MOM.
MOM. ON MOM.
E201
E203
E205
E207
E208
E211**
E213**
E215**
DP
SPDT
2-1
N/A
OPEN
N/A
2-3
ON NONE ON
ON OFF ON
MOM. OFF MOM.
ON OFF MOM.
ON NONE MOM.
E101
E103
E105
E107
E108
SP
SCHEMATIC
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
MODEL
NO.
NO.
POLES
E Series
Sealed Miniature Rocker and Lever Handle Switches
SWITCH FUNCTION
DPDT
SPDT
Part number shown: E101J1ZBE2
Part number shown: E201J1ZBE2
** Wiring for 3-way switch, Hardware available seperately, see Technical Data section of this catalog.MOM. = Momentary
All models with all options when ordered with G, Q, R or S contact material.
Terminal Nos.
For Reference Only
Terminal Nos.
For Reference Only
C&K marking on opposite sideC&K marking on opposite side
G
Rocker
G–27
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
G–28
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
G
Rocker
E Series
Sealed Miniature Rocker and Lever Handle Switches
SWITCH FUNCTION
ACTUATOR–PANEL REAR MOUNT
PANEL MOUNTING
J8 Actuator
J1 & J2 Actuators
3PDT
2-1,5-4,8-7N/A2-3,5-6,8-9ON NONE ON
E301
3P
SCHEMATIC
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
MODEL
NO.
NO.
POLES
3PDT
C&K marking on opposite sideC&K marking on opposite side
Part number shown: E301J1ZBE2
All models with all options when ordered with G, Q, R and S contact material.
MOM. = Momentary
** Wiring for 3-way switch, see Technical Data section of this catalog.
Terminal Nos.
For Reference Only
Finish: Matte. Other colors, custom actuator mark-
ings and legends available, consult Customer
Service Center.
NOTE: Hardware: two each—mounting screws,
nuts, lockwashers and standoffs for 1/8 inch thick
panel are supplied standard on switches with panel
mounting bracket. Internal o-ring actuator seal
standard. Actuators available separately, see
page G-37. Hardware available seperately, see
Technical Data section of this catalog. J1, J2 actua-
tors available with C, Z or Z3 terminations.
2
BLACK
3
RED
ACTUATOR
COLOR
OPTION
CODE
J1
LEVER
J2
LEVER
ACTUATOR COLOR
ACTUATOR
G
Rocker
G–29
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
E Series
Sealed Miniature Rocker and Lever Handle Switches
ACTUATOR–REAR MOUNT
PANEL MOUNTING
Actuator finish: Matte, frame finish: gloss.
Other colors, custom actuator markings
and legends available, consult Customer
Service Center.
NOTE: Internal o-ring actuator seal standard.
Actuators & frames available separately, see
page G-37. Hardware available seperately, see
Technical Data section of this catalog. N. J11
& J21 actuators available with C, Z & Z3 ter-
minations.
2
BLACK
FRAME COLOR
OPTION
CODE
ACTUATOR–PC MOUNT
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Hardware: two each—mounting
screws, nuts, lockwashers and standoffs for
1/8 inch thick panel are supplied standard on
switches with panel mounting bracket. Internal
o-ring actuator seal standard. Actuators
available separately, see page G-37. Hardware
available seperately, see Technical Data sec-
tion of this catalog. J1, J2 actuators available
with A, A3, AV2, AV3, V2-V61 terminations.
ACTUATOR COLOR
ACTUATOR
FRAME COLORACTUATOR
ACTUATOR COLOR
J11
ROCKER WITH FRAME
J21
LEVER WITH FRAME
J1
ROCKER
J2
LEVER
NOTE: This option has reduced anti-static capability.
NOTE: This option has reduced anti-static capability.
2
BLACK
3
RED
ACTUATOR
COLOR
OPTION
CODE
2
BLACK
3
RED
ACTUATOR
COLOR
OPTION
CODE
E Series
Sealed Miniature Rocker and Lever Handle Switches
ACTUATOR–PC MOUNT
PC MOUNTING
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Hardware: two each—mounting screws,
nuts, lockwashers and standoffs for 1/8 inch
thick panel are supplied standard on switches
with panel mounting bracket. Internal o-ring
actuator seal standard. Actuators available
separately, see page G-37. Hardware available
seperately, see Technical Data section of this
catalog.
J3 actuators available with AV2, AV3
& V2-V61 terminations. Some permissible actua-
tor/termination combinations may lack clearance
between actuator and PC board, and care must
be exercised to accommodate this condition.
J50, J60 & J90 actuators available with
A, AV2, AV3, V2 – V61 terminations.
TERMINATIONS
Z
SOLDER LUG
C
PC THRU-HOLE
SPDT thru 3PDT SPDT thru 3PDT
Not available with P, S, & R contact materials.
Available actuators, see page G-37.
ACTUATOR COLOR
ACTUATOR
J3
ROCKER
J50
ROCKER
J60
LEVER
J90
LEVER
2
BLACK
3
RED
ACTUATOR
COLOR
OPTION
CODE
G–30
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
G
Rocker
E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
PC MOUNTING
PC MOUNTING
Actuator Shown In Pos. 1
SECTION A-A
Actuator Shown In Pos. 1
SECTION A-A
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
A
RIGHT ANGLE, PC THRU-HOLE
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
A
RIGHT ANGLE, PC THRU-HOLE
SPDT thru 3PDT
Z3
QUICK CONNECT
NOTE: Not available with J3 actuator.
Available actuators, see pages G-28 and G-30.
Terminal bend radii and lead-in manufacturing option.
NOTE: Not available with J3, J50, J60 and J90 actuators.
Available actuators, see pages G-28 thru G-30.
Terminal bend radii and lead-in manufacturing option.
Not available with P, S, & R contact materials. Available
actuators, see pages G-28 thru G-30. Mating quick connector
available; order part number 530100000, page G-38.
NOTE: PC mounting pattern must clear
switch support leg.
E101J1ABE2
Horizontal Actuation
SPDT
E201J1ABE2
Horizontal Actuation
DPDT
G
Rocker
G–31
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
Actuator Shown In Pos. 1 SECTION A-A
PC MOUNTING
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
A
RIGHT ANGLE, PC THRU-HOLE
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages G-28 and G-30.
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages G-28 and G-30.
E301J1ABE2
Horizontal Actuation
3PDT
E101J1AV2BE2
Vertical Actuation
SPDT
G–32
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
G
Rocker
E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
SECTION A-A
Actuator Shown In Pos. 1
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
PC MOUNTING
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
AV3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages G-28 and G-30.
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages G-28 and G-30.
E301J1AV2BE2
Vertical Actuation
3PDT
E201J1AV2BE2
Vertical Actuation
DPDT
G
Rocker
G–33
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
SECTION A-A
Actuator Shown In Pos. 1
PC MOUNTING
Actuator Shown In Pos. 1 SECTION A-A
PC MOUNTING
V5
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages G-28 and G-30.
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages G-28 and G-30.
V5
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
E101J1V5BE2
Vertical Actuation
SPDT
E201J1V5BE2
Vertical Actuation
DPDT
G–34
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
G
Rocker
E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
PC MOUNTING
PC MOUNTING
PC MOUNTING
V21
VERTICAL MOUNT, V-BRACKET, SNAP-IN
V7, V8
VERTICAL MOUNT, V-BRACKET
V21
VERTICAL MOUNT, V-BRACKET, SNAP-IN
V6, V7, V8
VERTICAL MOUNT, V-BRACKET
V21
VERTICAL MOUNT, V-BRACKET, SNAP-IN
V6, V7, V8
VERTICAL MOUNT, V-BRACKET
NOTE: Available actuators, see pages G-28 and G-30.
NOTE: Available actuators, see pages G-28 and G-30.
NOTE: Available actuators, see pages G-28 and G-30.
V21
.555 (14, 10)
V6
.460 (11, 68)
V7
.630 (16, 00)
V8
.953 (24, 21)
DIM ‘A’
OPTION
CODE
V21
.555 (14, 10)
V6
.460 (11, 68)
V7
.630 (16, 00)
V8
.953 (24, 21)
DIM ‘A’
OPTION
CODE
V21
.555 (14, 10)
V7
.630 (16, 00)
V8
.953 (24, 21)
DIM ‘A’
OPTION
CODE
E101J1__BE2
SPDT
E201J1__BE2
DPDT
E301J1__BE2
3PDT
G
Rocker
G–35
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
G–36
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
G
Rocker
E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
PC MOUNTING
PC MOUNTING
PC MOUNTING
V31
VERTICAL MOUNT, V-BRACKET, SNAP-IN
V3, V4
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
V4
VERTICAL MOUNT, V-BRACKET
V31
VERTICAL MOUNT, V-BRACKET, SNAP-IN
V3, V4
VERTICAL MOUNT, V-BRACKET
NOTE: Available actuators, see pages G-28 and G-30.
NOTE: Available actuators, see pages G-28 and G-30.
NOTE: Available actuators, see pages G-28 and G-30.
V3, V31
.460 (11,68)
V4
.630 (16,00)
DIM ‘A’
OPTION
CODE
V41
.630 (16,00)
DIM ‘A’
OPTION
CODE
V3, V31
.460 (11,68)
V4
.630 (16,00)
DIM ‘A’
OPTION
CODE
E101J1__BE2
SPDT
E201J1__BE2
DPDT
E301J1__BE2
3PDT
G
Rocker
G–37
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
E Series
Sealed Miniature Rocker and Lever Handle Switches
CONTACT MATERIAL
SEAL
AVAILABLE HARDWARE
J2, J21 Actuators
PART NO.
760502263
BLACK
760503000
RED
Material: Nylon
Finish: Matte
J50 Actuator
PART NO.
775A02263
BLACK
775A03000
RED
Material: Nylon
Finish: Matte
J60 Actuator
PART NO.
613802263
BLACK
598103000
RED
Material: Nylon
Finish: Matte
J90 Actuator
PART NO.
598002263
BLACK
598003000
RED
Material: Nylon
Finish: Matte
J3 Actuator
PART NO.
766602263
BLACK
766603000
RED
Material: Nylon
Finish: Matte
J1, J11 Actuators
PART NO.
776A02263
BLACK
776A03000
RED
Material: Nylon
Finish: Matte
NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog.
Other colors available, consult Customer Service Center.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2END CONTACTS: Coin silver, with gold plate over nickel plate.
3CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4END CONTACTS: Coin silver, silver plated.
5CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver
plate. Or copper alloy, silver plated.
6TERMINALS: Copper alloy, with matte-tin over nickel plate.
NOTE: Any models supplied with Q, B, G, S P & R contact material are RoHS compliant.
All models with all options when ordered with G, Q, S & R contact material.
B contact material standard with all terminations.
P R & S contact materials not available with Z terminations.
E
EPOXY SEAL
OPTION
CODE CONTACT
MATERIAL TERMINAL
PLATING RATINGS
SILVER
5
MATTE-TIN
6
GOLD
1
SILVER
4,5
GOLD OVER
SILVER
2,3
GOLD
3
MATTE-TIN
6
GOLD
1
MATTE-TIN
7
LOW LEVEL/
DRY CIRCUIT
POWER
LOW LEVEL/DRY
CIRCUIT OR POWER
0.4 VA MAX. @ 20 V AC OR DC MAX.
E1XX & E2XX MODELS: 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @250 V AC.
E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR
7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC.
DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @
125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
B
P
Q
S
G
R
E Series
Sealed Miniature Rocker and Lever Handle Switches
AVAILABLE HARDWARE
.495 – .505
(12,57 – 12,83)
.797 – .803
(20,24 – 20,40)
.005 R. MAX.
(0,13) TYP. .495 – .505
(12,57 – 12,83)
.595 – .605
(15,11 – 15,37)
.005 R.
(0,13)
MAX. TYP.
.495 – .505
(12,57 – 12,83)
.620 – .625
(15,75 – 15,88)
.005 R.
(0,13)
MAX. TYP.
PANEL MOUNTING
For part numbers
4529xxxxx, 4527xxxxx,
4528xxxxx, 4526xxxxx
For part numbers
4325xxxxx, 4326xxxxx
For part numbers
4327xxxxx, 4328xxxxx
TYPICAL APPLICATION
Fits Z3 Termination
female connector
PART NO.
530100000
Available in loose pieces.
Frame for J11, J21 Actuators
PART NO.
764500746
BLACK ENAMEL
764601106
RETAINING SPRING
Material: Spring Steel
J50, J60 & J90 Actuators
MATTE
PART NO.
486702000
Material: Nylon
Finish: Matte or Gloss
GLOSS
PART NO.
486802000
BLACK
NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog.
Other colors available, consult Customer Service Center.
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC
mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame.
Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
J1 & J2 Actuators
J50, J60 & J90 Actuators
.125” (3,18) PANEL THK.
PART NO.
452602263
BLACK
4526
03000
RED
.047” (1,19) PANEL THK.
PART NO.
452902263
4529
03000
.062” (1,57) PANEL THK.
PART NO.
452702263
4527
03000
.090” (2,29) PANEL THK.
PART NO.
452802263
4528
03000
.125” (3,18) PANEL THK.
PART NO.
432802263
BLACK
4328
03000
RED
.047” (1,19) PANEL THK.
PART NO.
432502263
4325
03000
.062” (1,57) PANEL THK.
PART NO.
432602263
4326
03000
.090” (2,29) PANEL THK.
PART NO.
432702263
4327
03000
G–38
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
G
Rocker
AVAILABLE HARDWARE
E Series
Sealed Miniature Rocker and Lever Handle Switches
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
Panel Inserts
Will fit separate snap-in frames for
J50, J60, J90 actuators.
NOTE: Special colors, custom markings available, consult Customer Service Center.
BLANK PANEL INSERT
WITHOUT HOLE FOR LED
PART NO.
476602000
BLACK
4766
03000
RED
PANEL INSERT
WITH HOLE FOR LED
PART NO.
894902000
8949
03000
G
Rocker
G–39
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
C&K Components:
E201J1AV2BE2 E105J1AV2BE2 E203J1AV2QE2 E101J1V3SE2 E108J1AV2QE2 E101J1CQE2 E101J1AV2GE2
E205J60V8QE2 E201J1CQE2 E203J1CBE2 E213J1AV2GE2 E105J2ABE2 E105J1AQE2 E211J2V3BE2
E101J1V5BE2 E301J1ASE2 E301J3V21QE2 E301J1ABE2 E205J2V6SE2 E215J50V6QE2 E108J1ZBE3
E101J1AME2 E103J3V6QE2 E101J1V6ME2 E103J60V3QE2 E201J1ABE3 E203J3V3QE2 E203J50AV2BE2
E201J1V5GE2 E211J60V6QE2 E201J60V6QE2 E301J2CQE2 E108J2V3BE2 E211J60V8QE2 E211J1ZBE2
E105J3V31QE2 E105J1V3QE2 E108J1AV2BE2 E201J1ZQE2 E107J3V21PE2 E105J60AV2BE2 E101J3V21QE2
E101J1AV2BE3 E108J60V8QE2 E201J1V4QE2 E101J11ZGE22 E101J1V3GE2 E213J60AQE2 E105J2ZQE2
E205J1ZBE2 E201J1AV2GE2 E201J60V4QE2 E103J60V31BE2 E301J1CQE2 E201J50V8QE2 E208J60V8QE2
E213J60AV2KE2 E201J1V6QE3 E103J1ALE2 E101J60ABE2 E213J1V31BE3 E108J1V31BE2 E101J11CBE22
E201J1AQE2 E101J2ABE2 E301J1AV2QE2 E105J2V3BE2 E203J1AV3QE2 E201J2AV2QE2 E101J50V6QE2
E105J3V21PE2 E101J1V6BE2 E105J60V3GE3 E103J2ABE2 E201J1V31QE2 E103J11ZQE22 E107J1A3BE2
E101J1V4QE2 E208J1V6BE2 E101J1CBE2 E205J1CQE2 E107J2V31KE2 E101J1V3ME2 E105J3V6BE3
E107J1ABE2 E105J11ZQE22 E107J1V3BE2 E101J1AV2KE2 E207J1ZQE2 E205J21ZQE22 E201J1V3QE3
E301J1V4BE2 E203J1CQE2 E205J2V6BE2 E213J1V3QE2 E101J1ZBE3 E105J2CQE2 E103J1AQE2
E103J50V6QE2 E101J90ABE2
