J–28
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
S Series
Slide Switches
Models Available
Features/Benefits
•6 to 15 AMPS
•Enclosed housing
•PC and Snap-in panel mounting
•Reversing option
•RoHS compliant
Typical Applications
•Portable tools
•Small appliances
•Floor care products
Specifications
CONTACT RATING: Q contact material (S1XX, S2XX Models):
6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @
125 V DC (UL/CSA). (S5XX, S6XX Models): 12 AMPS @
125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA).
(S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @
250 V AC (UL/CSA). See page J-31 for additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ωtyp. initial
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: -30ºC to +65ºC
STORAGE TEMPERATURE: -30ºC to +85ºC
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J–29 through J–32. For additional options not shown in catalog, consult Customer Service Center.
Materials
HOUSING: 6/6 nylon (UL94V-2), black.
TOP PLATE: 6/6 nylon (UL94V-2), black.
ACTUATOR: 6/6 nylon (UL94V-2), black (standard).
CONTACTS: Q contact material: Copper, silver plated. See page
J-31 for additional contact materials.
TERMINALS: Q contact material: Copper, silver plated. See page
J-31 for additional contact materials.
CONTACT SPRING: Music wire or stainless steel.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Switch Function
S101 SPST, 6 AMPS
S202 (DPDT, 6 AMPS
S802 DPDT,15 AMPS
S102 SPDT, 6AMPS
S112 SPDT,mom., 6 AMPS
S201 DPST, 6 AMPS
S602 DPDT, 12 AMPS
S701 SPST, 15 AMPS
S702 SPDT, 15 AMPS Mounting Style
SS Panel with mounting ears
MS PC thru-hole
S2 Snap-in panel with blacktop plate
TS Panel with mounting ears
Detent
1With detent
2Without detent
Actuator
03 .335" high
04 .500" high
09 .250" high
12 Screwdriver slot
(with marking)
13 Screwdriver slot
(without marking)
C2 Black cap
C3 Red cap
C5 Yellow cap
Contact Material
QSilver
BGold
GGold over silver Seal
NONE No seal
EEpoxy seal
Housing Markings
NONE No markings
DON-OFF
LON
MON-OFF
NRed rectangle on one end
Terminations
03 Solder lug with hole
02 PC Thru-hole
04 PC Thru-hole
07 Quick connect
08 PC Thru-hole
WC Wire lead
J
Slide
J
Slide
J–29
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
S Series
Slide Switches
SWITCH FUNCTION
ACTUATOR
C2; C3; C5 SNAP-ON CAP
13 SCREWDRIVER SLOT
(WITHOUT MARKING)
12 SCREWDRIVER SLOT
(WITH MARKING)
09 .250" HIGH03 .335" HIGH 04 .500" HIGH
Part number shown: S101031SS03Q
NOTE: and MOM. in table indicates momentary action.
All models with all options when ordered with ‘G’ or ‘Q’ contact material.
Contacts make on side actuator thrown.
NOTE: Standard actuator color is black, other colors available, consult Customer Service Center. Alternate heights
are available with ‘03, 04 and 09’ actuators, consult Customer Service Center. Models with S2 mounting style,
subtract .090 (2, 29). Actuators ‘12’ and ‘13’ are available with DPST and DPDT models only.
Part number shown: S202031SS03Q
White 115-230 markings (std.). Without markings.
Available with S2 mounting
style only.
NOTE: Actuator finish: matte.
If no color is specified, black will be
supplied. Colored actuator caps may
also be ordered separately and user
installed, see page J-31.
C2 BLACK
C3 RED
C5 YELLOW
C1-CT CAP
COLOR
OPTION
CODE2
S101
6SPSTSS
S102 6SPDTMS,SS
S112 6SPDT-MOM.MS,SS
S701 15 SPSTS1,S2,S3,ST
S702 15 SPDTS1,S2,S3,ST
SP
AVAILABLE
MOUNTING
STYLES
SCHEMATIC
SWITCH
FUNCTION
AMP
RATING
MODEL
NO.
NO.
POLES
S201 6DPSTMS,SS,TS
S202 6DPDTMS,SS, TS
S60212 DPDTMS,SS, TS
S802 15 DPDTS1,S2,S3,ST
DP
AVAILABLE
MOUNTING
STYLES
SCHEMATIC
SWITCH
FUNCTION
AMP
RATING
MODEL
NO.
NO.
POLES
SPST DPDT
J–30
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
S Series
Slide Switches
DETENT
MOUNTING STYLE
PANEL MOUNTING
PANEL THICKNESS:
.020(0,57)–.200(5,08)
PANEL MOUNTING
S2 SNAP-IN PANEL
SS PANEL WITH MOUNTING EARS
2WITHOUT DETENT
1WITH DETENT
MS PC THRU-HOLE
S202031SS03Q
DPDT
S202031MS02Q
DPDT
S802C21S207Q
DPDT
Standard with all maintained models: S101, S102, S201, S202, S602, S701, S702, and S802.
Standard with all momentary models: S112.
AVAILABLE WITH:
Models: S101, S102, S112,
S201, S202 and S602
Terminations: All except 08
Actuators: 03, 04, 09, 12*
and 13*.
*12 and 13 actuators not
available with S1XX models.
AVAILABLE WITH:
Models: S101, S102, S112,
S201, S202, S602
Terminations: 02, 04 and 08
Actuators: 03, 04, 09, 12* and 13*
*12 and 13 actuators available with
S201, S202 and S602 models only.
PC MOUNTING
For mounting information, see
TERMINATIONS section, page J-30.
AVAILABLE WITH:
Models: S701, S702,
and S802
Terminations: 04, 07, 57 and WC
Actuators: C2, C3, C5 and 03
J
Slide
J
Slide
J–31
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
S Series
Slide Switches
MOUNTING STYLE
PANEL MOUNTING
.118 ± .015
(3,00 ± 0,38)
.368 ± .015
(9,35 ± 0,38)
.113 ± .015
(2,87 ± 0,38)
.140
(3,56)
.503 ± .015
(12,78 ± 0,38)
PC MOUNTING
08 terminations
with MS mounting style.
02 & 04 terminations
TS PANEL WITH MOUNTING EARS
08 PC THRU-HOLE WC WIRE LEAD07 QUICK CONNECT
04 PC THRU-HOLE03 SOLDER LUG WITH HOLE 02 PC THRU-HOLE
TERMINATIONS
AVAILABLE WITH:
Models: S201, S202, and S602
Terminations: All
Actuators: 03, 04 and 12.
Recommended with ‘MS’
mounting style only.
MS mounting style only.
NOTE: All terminals on S1XX, S2XX and S6XX models are .020 (0,51) thick;
all terminals on S7XX and S8XX models are .031 (0,79) thick.
Recommended with double pole
models only.
18 AWG wire for S1XX and S2XX models.
16 AWG wire for all other models. Black
wire standard, other colors and lengths
available, consult Customer Service Center.
UL style 1015.
S202031TS03Q
DPDT
J–32
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
S Series
Slide Switches
TOP PLATE MARKINGS
CONTACT MATERIAL
SEAL
AVAILABLE HARDWARE
EPOXY .075 MAX.
(1,91)
EEPOXY SEALNONE NO SEAL
NRED RECTANGLE ON ONE ENDMON-OFFLONDON-OFFNONE NO MARKINGS
1CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
2CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).
3CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate.
NOTE: Top plate markings are available with ‘S2’ mounting style only. The marking color
on all top plates with marking options ‘D, L and M’ is white, standard. (except white top plates: marking
color is black, standard). The marking color on all top plates with ‘N’ marking option is red, standard.
Other marking colors are available, consult Customer Service Center.
Note: Orientation of
actuator markings
and terminals.
All models with all options when ordered with ‘G’ or ‘Q’ contact material.
NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials.
Cap, C2; C3 actuators
PART NO.
121160100 WHITE
121160200 BLACK
121160300 RED
Material: 6/6 Nylon
Finish: Matte
Cap, 03 actuator
PART NO.
121000101 WHITE
121000102 BLACK
121000103 RED
Material: 6/6 Nylon
Finish: Gloss
NOTE: Other cap colors available, consult Customer Service Center.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
S1XX, S2XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR
6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC
(UL/CSA).
S6XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR
12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC
(UL/CSA).
S7XX, S8XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR
15 AMPS @ 125 V AC; 6 AMPS @ 250 V AC (UL/CSA).
0.4 VA MAX. @20 V AC OR DC max.
S1XX, S2XX MODELS: 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC;
1 AMP @ 125 V DC (UL/CSA).
S6XX MODELS: 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC;
1 AMP @ 125 V DC (UL/CSA).
S7XX, S8XX MODELS: 15 AMPS @ 125 V AC; 6 AMPS @
250 V AC (UL/CSA).
LOW LEVEL/DRY
CIRCUIT OR POWER
POWER
LOW LEVEL/DRY CIRCUIT
GOLD OVER
SILVER 3
GOLD 1
SILVER 2
OPTION
CODE RATINGS
CONTACT
MATERIAL
Q
B
G
J
Slide
