14 April 2015 Page 1 FEATURES 100W Constant Current LED Driver with Dimming High Efficiency & High Power Factor - Meets Energy Star & DLC Wide Range Input 90-305 VAC Certified to UL8750, EN61347 & CE Class 2 Output (Some Models) 0-10V & PWM (Output) Dimming Damp & Wet Location Certified (Applicable Models), IP67 Certified 5 Year Warranty Over Voltage, Short Circuit & Optional Over Temperature Protection Long Life Japanese Electrolytic Capacitors RoHS Compliant LWC100 Series Output See Part Number Builder to create your customized part SPECIFICATIONS Model # (1) PF (4) Voltage Output Power LWC100-035S1 350 186V~286V 100 W 110V 91% 220V 92% 277V 0.9 LWC100-045S1 450 144V~222V 100 W 91% 92% 0.9 LWC100-054S1 540 120V~185V 100 W 91% 92% 0.9 LWC100-070S1 700 93V~143V 100 W 91% 92% 0.9 LWC100-105S1 1050 62V~95V 100 W 91% 92% 0.9 LWC100-140S1 1400 47V~72V 100 W 91% 92% 0.9 LWC100-168S3 (2) 1680 37V~57V 96 W 91% 92% 0.9 LWC100-200S3 (2) 2000 31V~48V 96 W 91% 92% 0.9 LWC100-234S2 (2) 2340 27V~41V 96 W 91% 92% 0.9 LWC100-267S2 (2) 2670 23V~36V 96 W 91% 92% 0.9 LWC100-300S2 (2) 3000 21V~32V 96 W 91% 92% 0.9 LWC100-343S2 (2) 3430 18V~28V 96 W 91% 92% 0.9 LWC100-400S2 (2) 4000 16V~24V 96 W 91% 92% 0.9 Load Regulation 5% Line Regulation 2% Current range 5% Turn-on Delay Ripple & Noise (pk-pk) 0.6 sec. (Typ.) Measured at 110Vac input. / 0.6 sec. (Typ.) Measured at 220Vac input. 3% Vo Measured by 20 MHz bandwidth oscilloscope and the output paralleled a 0.1 uF ceramic capacitor and a 10 uF electrolytic capacitor Rated Voltage 100~277 Vac Frequency Range 50Hz ~60Hz Inrush Current Input Efficiency (Typ.) Current (mA) AC Current (Typ.) THD Leakage Current www.autec.com 65A at 230Vac input, 25C Cold Start 1.5 A measured at full load and 100 Vac input / 0.8 measured at full load and 220 Vac input < 20% measured at 100-277 Vac, from 75% to 100% Load 0.25 mA Measured at 277Vac 60Hz Input Autec Power Systems Tel: (805)522-0888 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777 14 April 2015 Protections Page 2 Protection type : Hiccup mode, recovers automatically after fault condition is removed Short Circuit 110C Maximum temperature of components inside the case, will auto recover after cooling (Optional) Over Temperature Over Voltage Environmental Temperature Range Safety & EMC Operational Safety Standards - 40 ~ +85C Storage Case Temperature Max. +90C (See Mechanical Drawing for exact location) Operational 10% ~ 100% RH Storage 5% ~100% R.H Humidity EMI Conduction & Radiation EMS Immunity Surge MTBF Others Latch mode, recycle AC to restart - 40C ~+ 70C Lifetime Dimensions UL8750, Compliance to UL1012 UL1310. CAN/CSA-C22.2 No. 223, CSA-C22.2 No. 107.1, CSA-C22.2 No. 250.0-13-12 EN61347.1, EN61347-2-13 and EN60529 Meet EN55015 FCC Part 15 Class B EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61547 EN61000-4-2 4kV contact discharge (6kV option available) 415,000 hours For 1400 mA output model, measured at 110V input, 80%Load and 25C ambient temperature (MIL-HDBK-217F) 88,000 hours For 1400 mA output model, measured at 220V input, 80%Load and 45C ambient temperature Millimeters (L*W*H) 183*67.5*35 1000g Weight Notes: 1. A suffix-xxx may be added to denote variations or modifications to the base product, where x can be any alphanumeric character or blank. 2. Class 2 output for US & Canada. 3. Minimum measured at 70% load 4. If not specified all measurement done at full load, 25C ambient and 230 Vac input. www.autec.com Autec Power Systems Tel: (805)522-0888 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777 14 April 2015 Page 3 Mechanical Specifications 10Vaux YELLOW WIRE IS OPTIONAL Derating Curve Output power Load % Vs. Input Voltage 100 90 80 70 60 50 40 30 20 10 Load % 90 110 130 150 170 190 210 230 250 277 Input Voltage www.autec.com Autec Power Systems Tel: (805)522-0888 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777 14 April 2015 Page 4 Efficiency vs. Load 95 Efficency 90 115Vac 230Vac 85 277Vac 1400mA model 80 50 75 Load (%) 100 Power Factor Vs. Load Power Factor vs Load 1.00 0.90 PF 0.80 0.70 115Vac 230Vac 277Vac 0.60 0.50 50 70 100 Load (%) www.autec.com 1400mA model Autec Power Systems Tel: (805)522-0888 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777 14 April 2015 Page 5 Life Time Vs. Case Temperature Life Time vs Case Temperature 1400 mA Model Input 110Vac 400 350 Life Time (K Hours) 300 250 200 150 100 50 0 30 40 50 60 70 80 90 100 Case Temperature (C) Life Time vs Case Temperature 1400mA Model Input 220Vac 450 400 Life Time (K Hours) 350 300 250 200 150 100 50 0 30 40 50 60 70 80 90 100 Case Temperature (C) www.autec.com Autec Power Systems Tel: (805)522-0888 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777 14 April 2015 Page 6 PART NUMBER BUILDER LWC100-045Sx 4 xT-xxx Non-Standard Part Indicator T= Thermal Switch, blank for none L=AC/DC LED Driver W=Wide Input Voltage 90-305V C=Constant Current 100=Output Power (Watts) Dimming Options: 0= Non dimming 2=2 wire Dimming 0-10V 3=3 wire Dimming 0-10V Surge Protection: 4=4kv (standard) 6=6kv (optional) Output class: 045mA=Output Current 1=Non Class 2 2=Class 2 US & Canada (Up to 42V) 3=Class 2 US & Canada (43 to 48V) S=Single output SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE, AUTEC IS NOT RESPONSIBLE FOR ISSUES ARISING FROM ERRORS OR OMMISIONS www.autec.com Autec Power Systems Tel: (805)522-0888 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777 14 April 2015 Page 7 Dimming Control Parameter 10V output voltage 10V output source current Voltage on the 0~10V input pin Min. 9.8V 0mA 500mV Typ. 10V Max. 10.2V 10mA Notes 12V Source current on 0~10V input pin 0mA 1mA The Dimmer control may be operated from a potentiometer, an input signal of 0 - 10 Vdc or PWM signal. Two recommended implementations are provided below. Notes: 1. If the dimming function is not used, please open the yellow, purple and grey. 2. Io is actually output current and Ir is rated current without dimming control. 3. Do not connect the dimming return to the output; otherwise the driver will not work normally. www.autec.com Autec Power Systems Tel: (805)522-0888 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777