Data Sheet PS8902 R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 1 Mbps HIGH CMR ANALOG OUTPUT TYPE, 8-PIN LSDIP PHOTOCOUPLER FOR CREEPAGE DISTANCE OF 14.5 mm DESCRIPTION The PS8902 is an optically coupled isolator containing a GaAlAs LED on the light emitting diode (input side) and a PIN photodiode and a high-speed amplifier transistor on the output side on one chip. FEATURES Long creepage distance (14.5 mm MIN.) 8-pin LSDIP (Long Creepage SDIP) type High-speed response (tPHL = 0.8 s MAX., tPLH = 1.2 s MAX.) High common mode transient immunity (CMH, CML = 15 kV/s MIN.) Embossed tape product: PS8902-Y-F3: 1 000 pcs/reel Pb-Free Product Safety standards * UL approved: No. E72422 * CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) * DIN EN 60747-5-5 (VDE 0884-5) approved (Option) PIN CONNECTION (Top View) 8 1 7 6 2 3 5 4 1. NC 2. Anode 3. Kathode 4. NC 5. GND 6. Vo 7. NC 8. Vcc APPLICATIONS Power supply Computer and peripheral manufactures General purpose inverter Substitutions for relays and pulse transformers R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 1 of 15 Start of mass production Sep.2015 PS8902 PACKAGE DIMENSIONS (UNIT: mm) 6.70.3 5 1 4 13.80.3 8 0.50.1 0.25 M S 1.27 0.250.15 0.20.15 3.70.25 3.50.2 16.70.4 0.80.25 0.1 S Weight: 0.642g (typ.) R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 2 of 15 PS8902 PHOTOCOUPLER CONSTRUCTION Parameter Air Distance Outer Creepage Distance Isolation Distance Unit (MIN.) 14.5 mm 14.5 mm 0.4 mm MARKING EXAMPLE No. 1 pin Mark R R 8902 9905 N231 N425 Company Initial Type Number Assembly Lot N N 4 2 25 31 Week Assembled Year Assembled (Last 1 Digit) Rank Code R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 3 of 15 PS8902 ORDERING INFORMATION Part Number Order Number Packing Style Solder Plating Specification Safety Standard Approval PS8902 PS8902-Y-AX Pb-Free 10 pcs (Tape 10 pcs cut) Standard products PS8902-F3 PS8902-Y-F3-AX (Ni/Pd/Au) Embossed Tape 1 000 (UL,CSA approved) PS8902-V PS8902-Y-V-AX 10 pcs (Tape 10 pcs cut) UL,CSA approved PS8902-V-F3 PS8902-Y-V-F3-AX Embossed Tape 1 000 DIN EN60747-5-5 pcs/reel (VDE0884-5): 2011-11 Application Part Number*1 PS8902 pcs/reel approved (Option) Note: *1. For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Diode Detector Symbol Ratings Unit mA Forward Current IF 25 Reverse Voltage VR 5.0 V Power Dissipation*1 PD 45 mW Supply Voltage VCC 35 V Output Voltage VO 35 V Output Current IO 8.0 mA Power Dissipation*2 PC 250 mW Vr.m.s. Isolation Voltage*3 BV 7500 Operating Ambient Temperature TA -40 to +110 C Storage Temperature Tstg -55 to +125 C Notes *1 Reduced to 0.8 mW/C at TA = 85C or more. *2 Reduced to5.2 mW/C at TA = 85C or more. *3 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-4 shorted together, 5-8 shorted together. R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 4 of 15 PS8902 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode MIN. TYP. MAX. Unit 1.35 1.65 1.85 V VF IF = 16 mA Reverse Current IR VR = 3 V - - 10 A IF = 16 mA - -2.2 - mV/C V = 0 V, f = 1 MHz - 30 - pF Terminal Capacitance Coupled Conditions Forward Voltage Forward Voltage Temperature Coefficient Detector Symbol VF/TA Ct High Level Output Current IOH (1) IF = 0 mA, VCC = VO = 5.5 V - 0.5 500 nA High Level Output Current IOH (2) IF = 0 mA, VCC = VO = 30 V - - 100 A Low Level Output Voltage VOL IF = 16 mA, VCC = 4.5 V, IOL = 1.2 mA - 0.1 0.4 V High Level Supply Current ICCH IF = 0 mA, VO = open, VCC = 30 V - 0.01 2 A Low Level Supply Current ICCL IF = 16 mA, VO = open, VCC = 30 V - 50 - A Current Transfer Ratio CTR IF = 16 mA, VCC = 4.5 V, VO = 0.4 V 15 - 35 % - - Input-Output 10 11 RI-O VI-O = 1 kVDC, RH = 40 to 60% CI-O V = 0 V, f = 1 MHz - 1.0 - pF Propagation Delay Time (H L)*1 tPHL IF = 16 mA, VCC = 5 V, RL = 2.2 k, CL = 15 pF - 0.3 0.8 s Propagation Delay Time (L H)*1 tPLH - 0.5 1.2 Common Mode Transient Immunity at High Level Output*2 CMH IF = 0 mA, VCC = 5 V, RL = 4.1 k, VCM = 1.5 kV,Vo>2V 15 - - Common Mode Transient Immunity at Low Level Output*2 CML IF = 16 mA, VCC = 5 V, RL = 4.1 k, VCM = 1.5 kV, Vo<0.8V 15 - - Isolation Resistance Input-Output Isolation Capacitance R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 kV/s Page 5 of 15 PS8902 Notes *1 Test circuit for propagation delay time PS8902 VCC = 5 V Pulse input (IF) (IF = 7.5 mA) Input 50% (PW = 1 s, Duty cycle = 1/10) 0.1 F Input (Monitor) 0V 5V VO (Monitor) Output CL = 100 pF RL = 20 k VOH 1.5 V VOL 47 tPHL tPLH Remark CL includes probe and stray wiring capacitance. *2 Test circuit for common mode transient immunity VCM =1.5KV 90 % PS8902 IF 1 8 2 7 3 6 4 5 SHIELD VCM 10 % VCC = 5 V 0.1 F tr RL VO (Monitor) CL = 15 pF VO (IF = 0 mA) VCM VO (IF = 16 mA) 10 % 90 % 0V tf 5V 2V 0.8 V VOL Remark CL includes probe and stray wiring capacitance. USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 6 of 15 PS8902 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) 50 45 40 35 30 25 20 15 10 5 0 0 20 40 60 80 100 120 250 200 150 100 50 0 0 20 80 100 120 High Level Output Current vs. Ambient Temperature 1000 TA = +110C +100C +85C +50C +25C -20C -40C 1 0.1 1.5 2 2.4 IF = 0mA 100 Vcc=Vo=30V 10 1 0.1 -25 Forward Voltage (V) Vcc=Vo=5.5V 0 25 50 75 100 125 Ambient Temperature Ta (C) Current Transfer Ratio vs. Forward Current Current Transfer Ratio 1.6 Vcc = 4.5V Vo = 0.4V 90 80 70 60 50 40 30 20 10 5 Forward Current IF (mA) R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 50 Current Transfer Ratio CTR 100 Current Transfer Ratio CTR (%) 60 Forward Current vs. Forward Voltage 10 0 0.5 40 Ambient Temperature Ta (C) High Level Output Current IOH (nA) Forward Current IF (mA) 300 Ambient Temperature Ta (C) 100 0.01 1 Detector Power Dissipation vs. Ambient Temperature Detector Power DissipationC PD (mW) Diode Power Dissipation PD (mW) Diode Power Dissipation vs. Ambient Temperature Normalized to 1.0 at Ta=25C IF = 16mA Vcc = 4.5V Vo = 0.4V 1.4 1.2 1 0.8 0.6 0.4 0.2 0 -50 -25 0 25 50 75 100 125 Ambient Temperature Ta (C) Page 7 of 15 PS8902 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) Output Current vs. Output Voltage Output Voltage vs. Forward Current 6 IF = 25mA IF = 20mA 8 6 IF = 15mA Output Voltage Vo (V) Output Current (mA) 10 IF = 10mA 4 IF = 5mA 2 0 0 2 4 6 8 10 12 14 16 18 5 4 RL = 2.2K 3 2 5.6K 1 0 0 20 Propagation Delay Time vs. Forward Current 3 Vcc = 5V RL = 2.2K 2 1 TPHL TPLH 0 0 5 10 15 20 25 Forward Current IF (mA) Propagation Delay Time TPHL, TPLH (s) 4 6 8 10 12 14 16 18 20 Forward Current IF (mA) Propagation Delay Time TPHL, TPLH (s) Propagation Delay Time TPHL, TPLH (s) Output Voltage Vo (V) 2 Propagation Delay Time vs. Load Resistance 10 Vcc = 5V IF = 16mA TPLH 1 TPHL 0.1 1 10 100 Load Resistance RL (K) Propagation Delay Time vs. Ambient Temperature 3 IF = 16mA Vcc = 5V RL = 2.2K 2.5 2 1.5 1 TPLH 0.5 0 -50 TPHL -25 0 25 50 75 100 125 Ambient Temperature Ta (C) R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 8 of 15 PS8902 TAPING SPECIFICATIONS (UNIT: mm) 4.5 MAX. (17.2) 11.50.1 1.5 +0.1 -0 24.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 2.00.2 12.00.1 (0.3) (4.05) (7.2) Tape Direction PS8902-F3 Outline and Dimensions (Reel) 2.00.5 21.00.8 1001.0 R 1.0 3302.0 2.00.5 13.00.2 25.51.0 29.51.0 Packing: 1 000 pcs/reel R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 9 of 15 PS8902 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 1.27 0.9 2 16.6 R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 10 of 15 PS8902 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron * Peak Temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 11 of 15 PS8902 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 12 of 15 PS8902 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Spec. Unit 40/110/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.6 UIORM., Pd 5 pC UIORM Upr 1 600 2 560 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 UIORM., Pd 5 pC Upr 3 000 Vpeak Highest permissible overvoltage UTR 12 000 Vpeak Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2 Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) CTI 175 Storage temperature range Tstg -55 to +125 C Operating temperature range TA -40 to +110 C Ris MIN. Ris MIN. 1012 1011 Tsi Isi Psi 175 400 700 C mA mW Ris MIN. 109 Material group (DIN EN 60664-1 VDE0110 Part 1) III a Isolation resistance, minimum value VIO = 500 V dc at TA = 25C VIO = 500 V dc at TA MAX. at least 100C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Total Power Dissipation Psi (mW) Input Current Isi (mA) Dependence of maximum safety ratings with package temperature 1000 900 800 700 600 Psi: Total Power Dissipation 500 400 300 Isi: Input Current 200 100 0 0 25 50 75 100 125 150 175 200 Package temp Tsi (C) R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 13 of 15 PS8902 Method a Destructive Test, Type and Sample Test VINITIAL =12000V V Vpr =2560V VIORM =1600V t3 tini t1 t2 tm t4 t ttest t1,t2 = 1 to 10 sec t3,t4 = 1 sec tm(PARTIAL DISCHARGE)= 10 sec ttest = 12 sec tini = 60 sec Method b Non-destructive Test, 100% Production Test Vpr =3000V V VIORM =1600V ttest t3 tp t t4 t3,t4 = 0.1 sec tm(PARTIAL DISCHARGE)= 1.0 sec ttest = 1.2 sec R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 14 of 15 PS8902 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. R08DS0128EJ0100 Rev. 1.00 Aug 24, 2015 Page 15 of 15 Revision History PS8902 Data Sheet Description Rev. Date 1.00 Aug 24, 2015 Page Summary First edition issued All trademarks and registered trademarks are the property of their respective owners. C-1 Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. California Eastern Laboratories, Inc. 4590 Patrick Henry Drive, Santa Clara, California 95054-1817, U.S.A. Tel: +1-408-919-2500, Fax: +1-408-988-0279 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-6503-0, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333 Tel: +86-21-2226-0888, Fax: +86-21-2226-0999 Renesas Electronics Hong Kong Limited Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2265-6688, Fax: +852 2886-9022 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949 Tel: +65-6213-0200, Fax: +65-6213-0300 Renesas Electronics Malaysia Sdn.Bhd. Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics India Pvt. Ltd. No.777C, 100 Feet Road, HALII Stage, Indiranagar, Bangalore, India Tel: +91-80-67208700, Fax: +91-80-67208777 Renesas Electronics Korea Co., Ltd. 12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2015 Renesas Electronics Corporation. All rights reserved. Colophon 5.0